Kyocera TASKalfa 520i 420i/520i Operation Guide - Page 248
Continuous Scan, Original Image, Scan Resolution, Description, Default Setting System Menu
View all Kyocera TASKalfa 520i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Default Setting (System Menu) Continuous Scan Set the continuous scan defaults. The available default settings are shown below. Item Off On Description Continuous scan not performed Continuous scan performed Refer to page 4-10 for Original Orientation. Use the procedure below to select the default settings for continuous scanning. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Continuous Scan. 3 Select [Off] or [On] for the default. Use the procedure below to select the default quality setting for originals. 4 Press [OK]. Original Image Set the default original document type. The available default settings are shown below. Item Description Text+Photo Text and photos together. Photo For photos taken with a camera. Text Only text, no photos. for OCR Image quality suitable for OCR software.* Printed Document For documents printed from this machine. * This function is only available for black and white mode. Use the procedure below to select the default quality setting for originals. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Original Image. 3 Select the default original image. 4 Press [OK]. Scan Resolution Select the default scanning resolution. The options are 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi, 200x400dpi Super Fine, 200x200dpi Fine, 200x100dpi Normal. Use the procedure below to select the default resolution setting. 8-16 OPERATION GUIDE