Kyocera TASKalfa 520i 420i/520i Operation Guide - Page 256
Default Setting System Menu, OPERATION GUIDE, Function Defaults, Repeat,
View all Kyocera TASKalfa 520i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
Default Setting (System Menu) Use the procedure below to set the default Repeat Copy setting. 1 Press the System Menu key. 2 Press [Common Settings], [ ] and [Next] of Function Defaults. Press [ ] twice and [Change] of Repeat Copy. 3 Select the default for [Off] or [On]. 4 Press [OK]. Collate/Offset Set the defaults for Collate/Offset. The table below shows the available settings. Collate Offset Item Off On Off Each Set (Each Page) Description Collate not performed. Collate performed. Offset not performed. Offset performed. (If [Off] is selected of Collate, it is performed [Each Page].) NOTE: Refer to page 3-13 for Collate/Offset. Use the procedure below to set the default Collate/Offset settings. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults. Press [ ] twice and [Change] of Collate/Offset. 3 Select the defaults for Collate and Offset respectively. 4 Press [OK]. JPEG/TIFF Print Select the image size (resolution) when printing JPEG or TIFF file. The table below shows the available settings. Item Fit to Paper Size Image Resolution Fit to Print Resolution Description Fit the image size to the selected paper size. Print at resolution of the actual image. Fit the image size to the print resolution. 8-24 OPERATION GUIDE