Kyocera TASKalfa 520i 420i/520i Operation Guide - Page 51
Preparation before Use, OPERATION GUIDE, Bonjour, Restarting the System on Network
View all Kyocera TASKalfa 520i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Preparation before Use 9 Press [Off] of Bonjour and then press [OK]. 10 Press [IP Address] and enter the address using the numeric keys. 11 Press [Subnet Mask] and enter the address using 2 the numeric keys. 12 Press [Default Gateway] and enter the address using the numeric keys. 13 Check if all the address entries are correct and press [OK]. 14 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-63. DHCP Settings Select whether or not to use the DHCP server. The default setting is On. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Next] of TCP/IP Setting. 3 Press [Change] of TCP/IP. 4 Press [On] and then press [OK]. 5 Press [Change] of IPv4. 6 Press [DHCP]. 7 Press [On] or [Off] of DHCP and then press [OK]. 8 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-63. Bonjour Settings Select whether or not to use Bonjour. The default setting is Off. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Next] of TCP/IP Setting. OPERATION GUIDE 2-13