Kyocera TASKalfa 520i 420i/520i Operation Guide - Page 90
Basic Operation, OPERATION GUIDE, Booklet from Sheets on the originals
View all Kyocera TASKalfa 520i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Basic Operation Original Orientation: Top Edge (Back Edge) Original Orientation: Top Edge (Back Edge) Original Orientation: Original Orientation: Left Top Edge (Left top Left Top Edge (Left top corner) corner) Built-in Finisher Cassette Paper Load Direction Built-in Finisher Cassette Paper Load Direction Use the procedure below to produce stapled copies. 1 Press the Copy key. 2 Place the originals on the platen. 3 Press [Org./Paper/Finishing] and then [Staple/ Punch]. Ready to copy. Copies 4 Select the staple position. Staple/Punch Place original. Staple Off Original Zoom Paper : --: 100% : --- Preview Punch Off Status Add Shortcut Top Left Top Right 2 staples Left 2 holes Left 2 holes Top 2 holes Right 2 staples Top 2 staples Right Bind and Fold 3 holes Left 3 holes Top 3 holes Right Cancel Top Edge Top Original Orientation OK 08/08/2009 10:10 NOTE: To use saddle stitching, press [Bind and Fold]. When placing originals, be sure to place the cover page at the bottom. For more information on saddle stitching, refer to Booklet from Sheets on page 4-19. 5 Press [Original Orientation] to choose orientation of the originals, either [Top Edge Top] or [Top Edge Left]. Then press [OK]. 6 Press [OK]. 7 Press the Start key. Copying begins. 3-18 OPERATION GUIDE