Kyocera TASKalfa 520i 420i/520i Operation Guide - Page 99

For send to folder (FTP) Basic Operation Item Data to be entered Max. characters Host Name* Host name or IP address of FTP server Up to 64 characters 3 Path Path to the receiving folder. For example, \User\ScanData. Otherwise the data will be saved in the home directory. Up to 128 characters Login User Name FTP server login user name Up to 64 characters Login Password FTP server login password Up to 64 characters * To specify a port number different from the default (21), enter using the format "host name: port number" (e.g., FTPhostname:140). To enter the IPv6 address, enclose the address in brackets [ ]. (e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140) Ready to send. Place original. Folder Path Entry SMB Host Name FTP Path Login User Name Login Password Specify the folder on the destination computer. Add to Addr Book Status Next Dest. Cancel Destination Connection Test OK 08/08/2009 10:10 5 Upon completion of all entries, press [Connection Test] to check the connection. NOTE: Connected. appears when connection to the destination is correctly established. If Cannot connect. appears, review the entry. To specify another destination, go to the step 6. To specify only one destination, go to step 7. 6 Press [Next Dest.] and repeat steps 3 to 5 to specify the destination. You can specify a combined total of up to 10 FTP and SMB destination folders. NOTE: When [Add to Addr Book] is displayed, the entry is registered in the Address Book. 7 Press [OK] to register the entry in the destination list. OPERATION GUIDE 3-27