Kyocera TASKalfa 620 Printing System (W) Operation Guide (Setup Edition)
Kyocera TASKalfa 620 Manual
View all Kyocera TASKalfa 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera TASKalfa 620 manual content summary:
- Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 1
Printing System (W) Operation Guide Set up Edition - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 2
- Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 3
Operation Guide The Setup Edition of this Operation Guide is meant to be read when using this machine as a local printer or a network printer by installing a printer board. This Operation Guide explains how to set up this machine. As the required set-up in order to use the printer as a scanner may - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 4
through a parallel cable or a USB cable. Page 4 2 Install the printer driver in the computer. (Refer to the On-Line Manual.) For network connection of this machine (connection of the printer through a network) 1 Connect a network cable (100Base-TX, 10Base-T or the like - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 5
Contents 1 Preparations ...1 Names of parts ...1 Main body ...1 Operation panel ...2 Accessories ...3 Items to be prepared by user ...3 2 Set-up ...4 Connecting the printer cable ...4 Connecting the network cable ...5 Setting the network (TCP/IP) ...6 Installing the software ...10 3 - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 6
iv - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 7
memory card. For details, refer to The Functions Edition of the Operation Guide. 2 USB interface connector - USB interface based on USB2.0. Use a USB When using this machine, turn on the main power switch. When connecting a printer cable or the like, turn off this switch. 6 Operation panel - When - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 8
for one of the various settings. Touch panel in the printer mode Ready to print. Printer Menu Cancel GO 5 6 7 5 [Printer Menu] - Press this key to perform printer initial setting. 6 [Cancel] - Press this key to cancel printing or to cancel error display. 7 [GO] - Select this key to continue - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 9
Accessories • CD-ROM (Product Library) • Operation Guide Preparations Items to be prepared by user • For parallel connection of the printer: Parallel cable (based on IEEE1284, shorter than 1.5 m) • For USB connection of the printer: USB2.0 compatible cable (based on High-Speed USB, shorter than - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 10
main power switch located on the rear left of this machine OFF ( ). Also, turn off the power of the computer to be connected. 2 Connect the printer cable to the parallel interface connector or the USB interface connector located on the rear right of this machine. 3 Connect the other side of the - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 11
). For details on setting of each interface, refer to the Functions Edition. Set-up Connecting the network cable When using this machine as a network printer, use a network cable (10Base-T or 100Base-TX) to connect this machine to a network. 1 Turn the main power switch located on the rear left of - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 12
not need to change the IP address because DHCP or BOOTP server configuration is already enabled as the factory default setting. • To cancel the setting, press the [Stop/Clear] key. 1 Press the [Printer] key. The machine enters the printer mode. 2 Press [Printer Menu]. 3 Press [Interface]. 4 Press - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 13
/IP Change # B ack 7 Press [] or [] to select DHCP and press [Change #]. TCP/IP Off On Printer menu - Interface - Network Setting Item DHCP BOOTP IP Address Subnet Mask Gateway Value Off Off 0. 0. 0. 0 0. 0. 0. 0 0. 0. 0. 0 B ack Close 8 Press [Off] and press [Close]. Interface - Network - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 14
the [#] key. Confirm per 3 lines pressing # key. To modify the entered address, press the [#] key to select the 3-digit address to be modified and use the numeric keys to enter the address again. 10 141 0 0 (with #key) Printer menu - Interface - Network - TCP/IP 14 Use the same procedure to - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 15
12 to 14. Interface - Network Setting Item DHCP B OOT P IP Address Subnet Mask Gateway Value Off Off 10. 141. 110. 204 255. 255. 255. 0 0. 0. 0. 0 Gateway Confirm per 3 lines pressing # key. Change # B ack 0 0 0 0 (with #key) Printer menu - Interface - Network - TCP/IP 19 When all the - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 16
Canceling printing Installing the software Install the software such as printer driver according to your computer system. For the method of installation, refer to the Printer Driver User Guide. 3 Canceling printing To cancel printing and clear the data, perform the following procedure. Press [ - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 17
4 Printing is canceled. COfafnlcineeling data. Orig. Page 16 A4 User name: user1 Job name: Canceling printing Cancel 11 - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 18
Canceling printing 12 - Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 19
- Kyocera TASKalfa 620 | Printing System (W) Operation Guide (Setup Edition) - Page 20
First edition 2008. 11 Printed in Japan 303M156010
Printing System (W)
Operation Guide
Set up Edition