Kyocera TASKalfa 8000i Kyocera Command Center RX User Guide Rev-1.2
Kyocera TASKalfa 8000i Manual
View all Kyocera TASKalfa 8000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera TASKalfa 8000i manual content summary:
- Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 1
- Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 2
guide may differ depending on your printing system. Examples of the operations given in this guide support the Windows 7 printing environment. Essentially the same operations are used for Microsoft Windows Vista, Windows XP, Windows Server 2003, and Windows Server 2008 environments. © 2011 KYOCERA - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 3
Page Login ...2-1 Top Bar ...2-1 Navigation Menu ...2-2 Status Displays ...2-3 Chapter 3 About Login Levels of Login ...3-1 Chapter 4 Document Box Custom Box ...4-1 Adding a New Custom Box ...4-1 Editing a Custom Box ...4-1 Working with a Custom Box ...4-2 Deleting a Custom Box ...4-5 FAX Box - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 4
Defaults > Device Defaults 6-6 Basic > Security > Device Security > General 6-8 Basic > Security > Device Security > Interface Block 6-8 Basic > Security > Device Security > Network Security 6-8 Basic > Security > User Login 6-8 Basic > Security > Certificates 6-9 Printer Page ...6-11 Printer - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 5
> Authentication > General 6-42 Advanced > Management > Authentication > Network User Property 6-43 Advanced > Management > Authentication > Group Authorization Set (to Rule3 6-48 Advanced > Link > HyPAS Device Online 6-49 Chapter 7 Troubleshooting Troubleshooting ...7-1 COMMAND CENTER RX iii - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 6
your network administrator. 1 Open a web browser. 2 Enter the device's host name or IP address as the URL. For example, http://192.168.10.1. The embedded server's home page will be accessed and displayed. The home page requests a User name and Password. For initial login, use the predefined Admin as - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 7
COMMAND CENTER RX 1-2 - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 8
enter the User Name and Password and click Login. Entering the predefined administrator password allows the user to access all pages, including Document Box, Address Book, and Settings on the navigation menu. To access the embedded server pages, the users can be identified by choosing one of network - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 9
, such as Device Defaults, Basic Networking as well as model, optional equipment installed, firmware, network parameters, FAX parameters, and information on the supported browsers. Job Status This page includes information on all device jobs including job status for printing, scanning, storing, and - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 10
, including primarily advanced network settings and security settings. For more information see page 6-1. Links Links to the Kyocera Mita Corporation websites. Visit the following website for more information and downloads. Download Drivers and Software For downloading printer drivers and software - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 11
or network authentication, User Login must be turned on. The default user name and password, or the local administrator account when User Login is turned off, is Admin. Local Authentication Users are registered in this device and one-to-one authentication is performed between this printing system - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 12
About Login For access using a job account ID, My Information, Device Information, Job Status, Document Box, Address Book, and Links are displayed in the navigation menu. 3-2 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 13
you can open the list of the user boxes, directly enter the box number in the Box # window and click Go to, or enter the box name in the Box Name window and click the magnifying glass icon, to quickly search the custom box. 3 Click Box Property. The Property page opens. 4 Make entries required to - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 14
Destination. If the box is passwordprotected, enter the password. 4 Click Move. The document is moved to the box. Copying a Document to Box 1 Select the document to copy as described above. 2 Click Copy. The Copy Settings page opens. The files selected are shown in Selected Files. 4-2 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 15
store the copied document in Destination. If the box is password-protected, enter the password. 4 Click Copy. The document is copied into the box. Joining Documents in One 1 Select the documents to join as described above. 2 Click Join. The Join Settings page opens. The files selected are shown in - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 16
Selected Files list by clicking Delete. 4 Enter the number of copies to print in Copies. 5 Use the Color Selection drop-down list if you want to change the color of the document when it is printed. 6 In Functions, change settings for Duplex, EcoPrint, Toner Save Level as desired. 4-4 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 17
FAX Box Document Box 7 Click Print. The document is printed. Deleting a Custom Box 1 Click Custom Box under Document Box on the navigation menu. The Custom Boxes page opens. Click All Boxes to show all custom boxes present in the device, and click My Boxes to show only the custom boxes of your own. - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 18
can check only one custom box to delete at a time. You can enter the box name in the Box Name window and click the magnifying glass icon to quickly search the custom box. 4 Click Delete. If required, enter the password and click OK. Polling Box This page allows you to print or delete documents in - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 19
the box so that documents are overwritten at updating, set Overwrite Setting to On. To configure the box so Printing Documents in Polling Box To print documents in a polling box, proceed as follows: 1 Click Document Box, then Polling Box which opens below on the navigation menu. The Polling Box page - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 20
Add Contact. The New Contact - Property page opens. 3 Enter the contact's Number, Name and E-mail. You can also enter SMB and FTP access information for the contact. Specify Host Name, Port Number, Path to the shared folder, Login User Name, and Login Password for the contact. If the FAX system - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 21
you want to edit by clicking its Number or Name. The Property page of the group opens. Alternatively, you can directly enter the group's Number in Address # window and click Go to, or the group's Name in the Address Name window and click the magnifying glass icon to search by name. COMMAND CENTER - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 22
E-mail, Folder, FAX, or i-FAX on the box to the left. If you want all groups displayed on the page deleted, click Check All. To deselect all, click None. Note: Deleting a group does not delete the contacts joined in the group. 3 Click Delete. To cancel, click Back. 5-3 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 23
, and Basic Networking. For details, see page 6-4. Printer Page This page includes settings that apply to the printing function of the device, such as Default Print Resolution and Copy Count. For details, see page 611. Scanner Page This page includes settings that apply to the scanning function of - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 24
• Security • Device/Printer • Scanner • FAX/i-FAX • Counters Network > General This allows you to verify the current settings for LDAP, TCP/ IP, IPP, IPP over SSL, AppleTalk, NetBEUI, IPv4, and IPv6. For more information, refer to Advanced Page on page 6-29. Network > IP Filters 6-2 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 25
> E-mail > SMTP > General on page 6-35. Network > Logical Printers This allows you to verify the settings made on the Logical Printers page of the Advanced page. For more information, refer to Advanced > Protocols > TCP/IP > Logical Printers on page 6-32. Network > NetWare This allows you to verify - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 26
see Basic > Security > User Login on page 6-8. Basic Page This section includes settings that apply to the device, such as Device Defaults, Security, and basic Networking. Basic > Defaults > Network This page allows you to make the settings that are required for network printing and sending E-mail - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 27
Settings Pages • IPv6 Specifies whether or not to enable the IPv6 protocol. Select On to use the IPv6 protocol. • IP Address (IPv6) Assigns an IPv6 address to the printing system network component. The format of the IPv6 address is a sequence of numbers (128 bit in total) separated by colons, for - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 28
A4 is selected for printing but the A4 tray is empty. Auto Error Clear Turns Auto Error Clear, which automatically clear errors when they occur, on or off. Error Clear Timer Specifies the time between 5 and 495 seconds after which errors are cleared automatically. Low Power Timer 6-6 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 29
to start scanning. Entry Check for New Dest(ination) When enabled, this determines whether re-entry of a password for confirmation is required when adding a new destination. Default Screen (Send/FAX) You can select either Destinations or Address Book to be displayed by default on the print system - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 30
), FTP (Reception), SMB, SNMP, SMTP, POP3, LPD, LDAP, WSD Scan, WSD Print, ThinPrint, Enhanced WSD, Enhanced WSD over SSL Specifies whether or not to The settings made on this page affect the protocol settings on the Advanced page. Basic > Security > User Login When the authentication function is - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 31
. Deleting a User Login 1 Click User Login, open the User Login page. 2 Check the desired user. When the check box on the left side of Login User Name is selected, all users displayed on the page will be checked. 3 Click Delete. The User Login - Delete page appears. You can confirm the users to be - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 32
Settings Pages Edit Certificate Click Edit to show Current Universal Time, and update the validity period of the certificate. Export Certificate Click Export to display the download dialog for the file. Click Save to download the exported certificate. If the printing system supports self-issued - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 33
, such as default print resolution or copy count. Default printer settings will be overridden by the printer driver settings. Settings that affect the machine entirely, such as locking the operation panel, are found under Basic Page on page 6-4. Printer > Summary of Network Printer Access Methods - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 34
saving the printing costs. The default setting is Off. Available for some machines. Toner Save Level Selects Toner Save Level from 1(Low) [low saving, darker printing] to 5(High) [high saving, lighter printing] when EcoPrint Mode is On. Printer > System > APL.Filter (Japan only) This page allows you - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 35
from the grouped cassettes. Printer > Document Output This page lets you select an output tray. Paper Output Determines the default output tray. Scanner Page This section includes settings that apply to the scanning function of the machine, such as default scan resolution or original placement - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 36
is 100%. Original Orientation Switches between Top Edge Top and Top Edge Left. Scanner > FTP This section provides a summary of the items displayed on the FTP page. FTP Switches FTP On or Off. FTP Port Number Sets the FTP Port Number or use the FTP default port 21. FTP Encrypted TX 6-14 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 37
use the SMB default port 139. Scanner > E-mail The E-mail page is used for printer = Model • %serial = Serial Number • %etheraddr = MAC Address • %host = Host Name • %ip = IP Address Body You can enter the information that you want to appear in the body of the Email in the 3 fields provided. Scanner - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 38
't need a password to open the document, but they must type the password to accomplish one of these restricted actions to the document, respectively. • Printing Allowed Restrict printing of the document. • Changes Allowed Restrict editing of the document. • Copying of Text/Images/Others User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 39
from the following: • Email - forwards E-mail to the E-mail address entered. • SMB - forwards SMB scan jobs to a shared folder on Microsoft Windows network. Enter the Host Name, Port Number, path to a shared folder, Login User Name, and the Login Password. • FTP - forwards FTP scan jobs to an - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 40
will be printed on one sheet whenever possible. Receive Date/ Time Selects On or Off whether to print the reception pages on the top of the received documents. Duplex Printing Specifies whether or not to use the Duplex mode. 2 in1 Receive Enables or disables 2 in1 reception. 6-18 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 41
Settings Pages FAX / i-FAX > Common RX/Forward Requirements > General Conditional reception/forwarding is a function for automatically forwarding documents received by FAX or i-FAX to other FAX machines, sending them as attachments to E-mail, or saving them into a FAX Box instead of printing if they - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 42
up to 9 are forwarded to the FAX Box. FAX Reception Port shows the list in page. When you want to execute multiple forwarding processes at the same time, for example printing and saving in a FAX Box, click both items and set the processes. Print Prints received documents on paper. • Name User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 43
Print Specifies whether to print on paper. • Copies to print When the previous item is set to On, specify the number of copies. Forward Forwards received documents to other FAX machines, E-mail addresses, shared folders on page 6-23. Save to FAX Box Saves received documents in a FAX Box. • - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 44
FAX Boxes appears. The FAX Box to be specified here must be registered in advance. For how to add a FAX Box, refer to FAX Box on page 4-5. page. Select ALL and click Submit. This completes the settings for applying the same forwarding process without using a Requirement list. 6-22 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 45
Forwards faxes by E-mail. Specify E-mail address. SMB Saves faxes in a shared folder accessible from Microsoft Windows Network. Specify Host Name, Port Number, Path to the shared folder, Login User Name, and Login Password. FTP Saves faxes on an accessible FTP server. Specify Host Name, Port Number - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 46
5. FAX / i-FAX > FAX > Receive The table below provides a summary of the items displayed on the Receive page. FAX Receive Selects the FAX reception mode. The choices are Auto (Normal, FAX/TEL, TAD or DRD) or Manual. (The selectable option is different depending on the destination.) User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 47
/ i-FAX > FAX > FAX Restrictions > General The table below provides a summary of the items displayed on the FAX Restrictions > General page. Transmit Restriction Selects the transmitting restriction between Off and Use Permit List + Address Book. Receive Restriction Selects the receiving restriction - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 48
displayed on the Defaults page. i-FAX Enables or disables i-FAX. Set to On to enable. FAX / i-FAX > i-FAX > SMTP The section below provides a summary of the items displayed on the SMTP page. SMTP Port Number Set the SMTP Port Number or use the SMTP default port 25. SMTP Server Name 6-26 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 49
SMTP authentication. Login Password Enter the login password. POP before SMTP Timeout Enter the timeout in seconds during which this machine tries to connect to the SMTP server when set POP before SMTP as the Authentication Protocol. Test Tests to confirm that the settings on this page are correct - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 50
tries to connect to the POP3 server. Login User Name Enter the login name of the user. Login Password Enter the password for connecting to the user name above. Use APOP Enables (On) or disables (Off) APOP. Test Tests to confirm that the settings on this page are correct. When the Test button is - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 51
settings in the machine. Refer to Basic > Defaults > Reset on page 6-6. Advanced > Network Protocol Quick Summary/Secure Protocol Quick Summary A the TCP/IP > General page. Host Name Specifies a name for the printing system network component. This name is also used as the NetBEUI printer name and - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 52
is also available in Windows OS using "Bonjour Print Services for Windows". With this tool installed on the Windows PC, a Bonjour-enabled printer can be installed using the "Bonjour Printer Wizard." To allow printing from the Mac OS X system, the printer needs to support KPDL. • Bonjour Name If - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 53
the Primary and Secondary fields provided. Advanced > Protocols > TCP/IP > IP Filters This page allows you to configure IP filters. IP filters restrict access to the printing system based on the IP addresses and protocols. Specify the IP addresses or network addresses of the hosts to which access is - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 54
to the the TCP/IP RAW port. When Bi-directional Printing = Off, all send data is discarded. In order to have the data that is received from the printer returned to the client when printing with PostScript, PJL and other such commands, it is necessary to set Bi-directional Printing = On. User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 55
to transmit a control code after the print data is sent. Advanced > Protocols > NetWare This printing system supports both NDS and bindery printing in either print server mode or remote printer mode. NetWare setup requires installation of the following client software and login with Administrator - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 56
Appletalk protocol is available in OS 10 versions 10.5 and below. Appletalk is no longer supported in Mac OS version 10.6. The printing system network component supports Mac OS of various versions (Web Browser on page 1-1) and is compatible with LaserWriter driver version 8.x. To set up the Ethernet - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 57
in the TCP/IP General page (Refer to Advanced > Protocols > TCP/IP > General on page 6-29). If you want to change the NetBEUI printer name, change the TCP/IP Host Name. Workgroup Workgroup represents the workgroup which will appear in Entire Network in "Windows Network Neighborhood." Comment You - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 58
Pages i-FAX User are set, you can select one of them. If you want to select a different user, select Other and enter the login account name and login password for authentication. Login User confirm that the settings on this page are the printing system, such as the printer administrator. User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 59
Pages • %printer = Model • %serial = Serial Number • %etheraddr = MAC Address • %host = Host Name • %ip = IP Address Event Report Items Select the events you want to be reported. These events are: • Add Paper • Low Toner • Add Toner • Cover Open • Paper Jam • All Other Errors printing default is - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 60
/IP > General on page 6-29. POP3 Port Number Set the POP3 Port Number, or use the POP3 default port number 110. Choose the default port number 995 for POP3 connections over SSL. POP3 Server Timeout Enter the timeout in seconds during which this machine tries to connect to the POP3 server. Login User - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 61
and transferring management information within the network environment. Should an error occur such as Add Paper, the printing system automatically generates a trap, an error message sent to predetermined trap recipients. The community names are used like passwords. SNMPv1/v2c Sets whether to use - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 62
Toner, Add Toner, Cover Open, Paper Jam, and All Other Errors. Advanced > Management > SNMP > SNMPv3 The section below provides a summary of the items displayed on the SNMPv3 page. After you have changed the setting, you must restart the printing or IP address for the LDAP server. 6-40 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 63
Settings Pages LDAP Port Number Specifies a port number for LDAP or use the LDAP default port 389. Search Timeout Specifies a period of time for searching the LDAP server. Login User Name Specifies the user name. Login Password Specifies the password. Max Search Results Specifies a maximum number of - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 64
. Select NTLM when the domain controller is Windows NT, Kerberos for Windows 2000 Server or Windows Server 2003, or Ext(ernal). Domain Name When Network Authentication is enabled, enter up to 10 domain names. You can select one of these domains at login. Select the Default radio 6-42 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 65
be enabled in order to obtain user information. Obtain Network User Property Turned On to obtain user information. LDAP Server Name Specifies a host name or IP address for the LDAP server. LDAP Port Number Specifies a port number for LDAP or use the LDAP default port 389. Search Timeout Specifies - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 66
an optional IC card reader is installed with the printing system. This enables reading an IC card (FeliCa®) to login the printing system. IC Card Read Type Selects either IDM or FeliCa® type for the IC card to use. System Code, Service Code, Number of User Blocks to Use These items are used when - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 67
Pages Subject You can include model name, serial number, MAC address and equipment ID in the subject line as follows: Enter one of the following conversion strings starting with %. The string will be converted into a pre-defined string to display the above information. • %printer Maintenance - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 68
in the following to take effect, restart the machine as described in Basic > Defaults > Reset on page 6-6. SSL Specifies whether or not to use the SSL protocol. Serverside Settings • HTTP Security is set to Secure (HTTPS), the document boxes cannot be accessed by the TWAIN driver. 6-46 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 69
Login User Name Enter the name of the user who accesses the printing system. The IEEE802.1x client certificate of this user must be valid. Login Password You can set a PEAP-based password the default policy for non-IPSec packets. Select Allow to allow communication with all hosts and networks - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 70
Rule1 (to Rule3) on page 6-48. Advanced > Security > IPSec > Rule1 (to Rule3) These pages allow you to select or edit host addresses can be specified for IP addresses of the rule. • Hash sharing algorithm allows two hosts on an unsecured network to share a private key securely. Select the User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 71
, an SA is disabled and updated when either the time or data size of the SA exceeds the specified value. • IP Version Specifies the IP version of the other end. Select IPv4 or IPv6. • IP Address (IPv4) Specifies the IPv4 addresses of the hosts or network with which the print system is connecting via - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 72
Settings Pages Allows to import, delete, or view Server Certificate and Client Certificate. About Displays the list of web browsers supported by the embedded server. 6-50 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 73
to find basic solutions for problems you may encounter with the embedded server. Troubleshooting Symptom I can't access the embedded server. Characters do not display properly in the embedded server. Check Items Is the power turned on to this machine? Is the network cable properly connected? Are - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 74
the Admin password. Contact your dealer or service center. Error or Warning is Is there an error message displayed under the shown in the display? STATUS indicator. Perform the troubleshooting procedure the messages suggests referring to the Operation Guide. Operation Guide 7-2 User Guide - Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 75
- Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 76
- Kyocera TASKalfa 8000i | Kyocera Command Center RX User Guide Rev-1.2 - Page 77
Rev. 1.2 2011.3