LG 27TNF3K-S Owners Manual

LG 27TNF3K-S Manual

Get LG 27TNF3K-S PDF manuals and user guides View all LG 27TNF3K-S manuals
Add to My Manuals
Save this manual to your list of manuals

LG 27TNF3K-S manual content summary:

  • LG 27TNF3K-S | Owners Manual - Page 1
    OWNER'S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read the user manual before using this product to ensure safe and convenient use. 27TNF3K www.lg.com Copyright © 2023 LG Electronics Inc. All Rights Reserved.
  • LG 27TNF3K-S | Owners Manual - Page 2
    ENGLISH 2 TABLE OF CONTENTS BASIC 3 --Checking the Accessories 3 CHECKING BEFORE INSTALLATION 4 --Installation Orientation 4 --Installation Location 5 PRECAUTIONS FOR USE 8 --Dust 8 --Afterimage 8 PRODUCT SPECIFICATIONS....... 10 LICENCE 12
  • LG 27TNF3K-S | Owners Manual - Page 3
    with your product may vary depending upon the model or region. •• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. •• SuperSign Software & Manual -- Visit http://partner.lge.com to download the latest SuperSign software and
  • LG 27TNF3K-S | Owners Manual - Page 4
    ENGLISH 4 CHECKING BEFORE INSTALLATION We are not responsible for product damage caused by failure to follow the guide. Installation Orientation Using Vertically When installing vertically, rotate the monitor 90 degrees anti-clockwise while facing t0h~e4fr5on°t of the screen. Tilt Angle 0~25° Panel
  • LG 27TNF3K-S | Owners Manual - Page 5
    ENGLISH 5 Installation Location We are not responsible for product damage caused by failure to follow the guide. This product is used as a built-in product installed inside the enclosure. -- The product warranty will be void if it is used with the front
  • LG 27TNF3K-S | Owners Manual - Page 6
    6 Rear-Side Mount Hole (Top/Bottom) Unit: mm (inches) 17.4 146 144 144 146 17.4 (0.6) (5.7) (5.6) (5.6) (5.7) (0.6) 5-M3 Mounting Hole ENGLISH 8.4 (0.3) (3 Middle Points) 10.4 (0.4) (2 Corner Points) 10.4 (0.4) (2 Corner Points) 8.4 (0.3) (3 Middle Points) 5-M3 17.4 146 134 154
  • LG 27TNF3K-S | Owners Manual - Page 7
    depth may damage the inside of the product. Be sure to use the proper length. •• For more information on installation, please refer to the user manual for the wall mount.
  • LG 27TNF3K-S | Owners Manual - Page 8
    ENGLISH 8 PRECAUTIONS FOR USE The Wake-up feature for sleep mode is not supported in this model. Dust The warranty will not cover any damage caused by using the product in an excessively dusty environment. Afterimage •• After-image appears
  • LG 27TNF3K-S | Owners Manual - Page 9
    ENGLISH 9 •• Recommended Usage Condition 1 Change the background colour and text colour at equal intervals. -- Afterimages occur less when the colours to be changed are complementary to one another. A A ITO or MoTi Pixel Layer 2 Switch the screen at equal time intervals. -- Take caution, and
  • LG 27TNF3K-S | Owners Manual - Page 10
    10 ENGLISH PRODUCT SPECIFICATIONS Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product. Input/Output Ports Embedded battery Resolution Power Voltage Environmental Conditions Applied Recommended
  • LG 27TNF3K-S | Owners Manual - Page 11
    HDMI (PC) Support Mode Resolution 800 x 600 1024 x 768 1280 x 720 1280 x 1024 1680 x 1050 1920 x 1080 Horizontal Frequency (kHz) Vertical Frequency (Hz) 37.879 60.317 48.363 60 44.772 59.855 63.981 60.02 65.29 59.954 67.5 60 11 Note ENGLISH
  • LG 27TNF3K-S | Owners Manual - Page 12
    ENGLISH 12 LICENCE Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade
  • LG 27TNF3K-S | Owners Manual - Page 13
    number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Supplier's Declaration of Conformity Trade Name LG Responsible LG Electronics USA, Inc. Party Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632
  • LG 27TNF3K-S | Owners Manual - Page 14
    USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read the user manual before using this product to ensure safe and convenient use. webOS 6.0 www.lg.com
  • LG 27TNF3K-S | Owners Manual - Page 15
    2 CONTENTS ENGLISH SAFETY PRECAUTIONS 5 --Precautions for the AC Adapter and Power.......6 --Precautions for Moving the Product 8 --Precautions for Installing the Product 9 --Precautions for Cleaning the Product 11 --Precautions for Using the Product 12 --Precautions for Using the Remote
  • LG 27TNF3K-S | Owners Manual - Page 16
    3 ENGLISH --General 34 [Language] [System Information] [Set ID] [Time & Date] [Power] [Network] [Safety Mode] [User Agreement] [Advanced Setting] --Display 49 [Picture Mode] [Aspect Ratio] [Rotation] [Advanced Setting] Video Output Resolution --Sound 58 [Sound Mode] [Sound Out] [Audio Out] [AV
  • LG 27TNF3K-S | Owners Manual - Page 17
    81 SMART CALIBRATION 82 --How to Run 82 [Manual Calibration] IR CODE 84 CONTROLLING MULTIPLE PRODUCTS 86 --Connecting cables 86 --Communication Parameter 87 --Command Reference List 88 --Transmission/Reception Protocol 93 TROUBLESHOOTING 121 To obtain the source code that is contained
  • LG 27TNF3K-S | Owners Manual - Page 18
    ENGLISH 5 SAFETY PRECAUTIONS The safety precautions are intended to prevent unexpected danger or harm by helping the user to use the product safely and for its intended purpose. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
  • LG 27TNF3K-S | Owners Manual - Page 19
    by the national standards. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized service center for a replacement. •• Operate the display only from a power source(i.e. voltage) indicated in the product specification. -- Otherwise the product can be
  • LG 27TNF3K-S | Owners Manual - Page 20
    ENGLISH 7 •• If water or any foreign substance goes inside the product, disconnect the power cord immediately and contact the service center. -- Otherwise, this may cause a fire or electric shock due to damage to the product. •• Keep the power cord or AC adapter away from any
  • LG 27TNF3K-S | Owners Manual - Page 21
    kg (220.4 lbs)) -- If use the damaged product again, contact the service center because it can cause electric shock or fire. •• Do not hold it upside down while holding only the stand. (It is for stand supported models only.) -- This may cause stand warping, panel damage and other types
  • LG 27TNF3K-S | Owners Manual - Page 22
    It can cause injury to human, problem to product and damage the display. earthquake. -- You must refer to the manual provided. •• Prevent Children from climbing or unplug the power cord and contact the service center. -- If you continue to safely and securely support the product to remain in place
  • LG 27TNF3K-S | Owners Manual - Page 23
    's picture quality, life cycle, and appearance. Please check with service engineer before installing. Please do not install the product in places •• Install the product on a flat and stable place that is large enough to support the product. -- If the product is dropped, you may be injured or the
  • LG 27TNF3K-S | Owners Manual - Page 24
    dust, it can cause fire or product damage. •• When you need to clean the inside of the product, you must contact the service center. -- Otherwise, cleaning without support may cause a fire, electric shock, or damage to the product. •• When cleaning the product, unplug the power cord and wipe gently
  • LG 27TNF3K-S | Owners Manual - Page 25
    . Switch it off immediately, unplug it from the power outlet and contact the service center. -- Otherwise, the product may cause fire or electric shock. •• Do impact on the product or screen. -- It can cause injury to human, problem to product and damage the screen. •• If you can smell smoke or other
  • LG 27TNF3K-S | Owners Manual - Page 26
    use without taking proper measures, electrical shock or fire can occur. Contact the service center. •• Keep small accessories out of the reach of children. -- If at the product or screen. -- It can cause injury to human, problem to product and damage the screen. •• All the power sources must be
  • LG 27TNF3K-S | Owners Manual - Page 27
    ENGLISH 14 Precautions for Using the Remote control WARNING •• Avoid places with high humidity. -- It may cause electrical shock or damage the product. •• Do not expose batteries to excessive heat, such as direct sunlight, open fireplace, and electric heaters. -- It may cause fire and you may be
  • LG 27TNF3K-S | Owners Manual - Page 28
    ENGLISH 15 Precautions for Experiencing Image Retention •• Displaying a still image for a prolonged period of time may cause damage to the screen, resulting in image retention. Most third-party products have the same issue. The resulting damage is not covered by the product warranty. -- Use a
  • LG 27TNF3K-S | Owners Manual - Page 29
    the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries control sensor on the monitor. •• Some features of the remote control may not be supported in certain models. •• The product's internal and external batteries should not be exposed
  • LG 27TNF3K-S | Owners Manual - Page 30
    . (Volume Up/Down Button) Adjusts the volume level. Selects the screen size. Automatically adjusts picture position and minimizes image instability. (This is supported only for the RGB input.) (MUTE) Mutes all sounds. Adjusts the brightness of the display. Moves to the previous or next screen.
  • LG 27TNF3K-S | Owners Manual - Page 31
    . Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. SuperSign menu key. (This function is not supported.) , After selecting the menu, select and adjust functions. (BACK) Returns to the previous level. Closes the menu. Allows you to control various
  • LG 27TNF3K-S | Owners Manual - Page 32
    you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the * feature. * : a feature that enables a PC to recognize devices attached by the user
  • LG 27TNF3K-S | Owners Manual - Page 33
    -- High Speed HDMI®/™ Cable with Ethernet •• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to manually change the default audio output to HDMI. •• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode. •• You
  • LG 27TNF3K-S | Owners Manual - Page 34
    ENGLISH 21 Connecting Multiple Monitors •• Images may differ according to the model. To use multiple products connected to each other, connect one end of the signal input cable to the HDMI/DP Out connector of first monitor and connect the other end to the HDMI/DP In connector of the second monitor.
  • LG 27TNF3K-S | Owners Manual - Page 35
    to DP 1.1a standard or higher. •• Daisy chaining the video output may be limited depending on the performance of the input device that supports HDCP. NOTE •• Software-related content may be changed without prior notice due to upgrades of the product functions. •• Some features described in the
  • LG 27TNF3K-S | Owners Manual - Page 36
    the focus does not move. •• Some QR code apps on mobile devices may not work. (You can access the page to download manuals by visiting the provided address.) [Content Manager] •• [Player]: Play a variety of content including images, videos, and SuperSign content. •• [Scheduler]: Manage schedules for
  • LG 27TNF3K-S | Owners Manual - Page 37
    ENGLISH 24 Ez Setting [Video Wall] [Ez Setting] [Video Wall] Set Video Wall options to create a wide visual canvas. •• [Tile Mode]: Turn [Tile Mode] on or off. •• [Tile Mode Settings]: Display a single integrated screen on multiple Signage monitors. •• [Simple Configuration]: automatically sets [
  • LG 27TNF3K-S | Owners Manual - Page 38
    ENGLISH 25 [On/Off Scheduler] [Ez Setting] [On/Off Scheduler] Set a schedule to use your signage by time and day of the week. •• [On/Off Time Setting]: Set on/off times for each day of the week. •• [Holiday Setting]: Set holidays by date and by day of the week. [SI Server Setting] [Ez Setting] [SI
  • LG 27TNF3K-S | Owners Manual - Page 39
    taking screenshots of an image or video that is playing at regular intervals, this feature will play back the file. (OLED model is not supported.) --> Capture time Interval: The time interval can be set to 30 min, 1 hour, 2 hours and 3 hours. -- [Media Storage]: When the automatic input switches due
  • LG 27TNF3K-S | Owners Manual - Page 40
    movement or shock caused by the external environment, an e-mail is sent to you. •• Only SMTP ports 25, 465, and 587 are supported. •• The occurrence of internal input switches, excluding external input switches (RC, RS232C, SuperSign), are considered as Fail Over Status. •• One email containing
  • LG 27TNF3K-S | Owners Manual - Page 41
    28 ENGLISH [Play via URL] [Ez Setting] [Play via URL] Play content you want to play automatically through the built-in web browser. •• [URL Loader]: Turns [Play via URL] on or off. •• [Set URL]: Enter the URL address to display automatically. •• [Preview]: Preview your desired website by accessing
  • LG 27TNF3K-S | Owners Manual - Page 42
    29 [LG ConnectedCare] [Ez Setting] [LG ConnectedCare] You can install the [LG ConnectedCare] (fault diagnosis) solution for fault diagnosis and prediction service. •• [Install]: Installs the [LG ConnectedCare] solution. 1) [ENTER ACCOUNT NUMBER]: Enters the 6-digit account number to install the [LG
  • LG 27TNF3K-S | Owners Manual - Page 43
    on a single screen. PIP Mode PBP Mode 3-Screen Split Mode 4-Screen Split Mode NOTE •• In multi-screen mode, the DP daisy chain feature is not supported. •• The number of split screens you can have may vary depending on the model. Selecting Screen Layout When you enter multi-screen mode without
  • LG 27TNF3K-S | Owners Manual - Page 44
    up to 30 frames. •• There may be additional restrictions on media depending on the codec combination. •• Some Full HD models only support PIP and PBP modes, and the maximum supported resolution is 1920 x 1080. Playing Videos on Split Screens Press the button on the upper right of each split screen
  • LG 27TNF3K-S | Owners Manual - Page 45
    ENGLISH 32 [Leveler Tool] [Ez Setting] [Leveler Tool] You can check the horizontal and vertical level status when installing the product. Check the tilt of the product •• The bubble and angle indicator in the leveler show the degree of tilt of the product. •• The leveler and angle indicator on the
  • LG 27TNF3K-S | Owners Manual - Page 46
    closing the app switches the input back to the previous status. Features supported by input auto switching are external input, SuperSign content, the SI If using the [Meeting Room Name] and [Time] items in the [Meeting Guide Screen], and if using the downloaded image as the No Signal image, it is
  • LG 27TNF3K-S | Owners Manual - Page 47
    ENGLISH 34 General [Language] [General] [Language] You can select the menu language to be displayed on the screen. •• [Menu Language]: Sets the language of your Signage monitor. •• [Keyboard Language]: Sets the language of the keyboard displayed on the screen. [System Information] [General] [System
  • LG 27TNF3K-S | Owners Manual - Page 48
    ENGLISH 35 [Power] [General] [Power] Power-related feature settings [No Signal Power Off (15 Min)] Set whether to use the 15 Min Auto Off feature. •• You can set this option to [On] or [Off]. •• If you set this feature to [On], the product turns off after it's remained in No Signal status for 15
  • LG 27TNF3K-S | Owners Manual - Page 49
    ENGLISH 36 [PM Mode] •• [Power Off (Default)]: Set the normal DC off mode. •• [Sustain Aspect Ratio]: The PC retains the Extended Display Identification Data (EDID) even when the power is off. •• [Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), or
  • LG 27TNF3K-S | Owners Manual - Page 50
    available wireless Internet networks. •• [Add a Hidden Wireless Network]: You can add a wireless network by manually typing in its name. •• [Connect via WPS PBC]: Press the button on the wireless router that supports PBC to easily connect to the router. •• [Connect via WPS PIN]: Enter the PIN number
  • LG 27TNF3K-S | Owners Manual - Page 51
    connection without a wireless router and use wireless Internet. •• The SoftAP and Screen Share features cannot be used at the same time. •• On models that support Wi-Fi dongles, the SoftAP menu is enabled only when a Wi-Fi dongle is connected to the product. •• Wi-Fi Channel: You can directly select
  • LG 27TNF3K-S | Owners Manual - Page 52
    ENGLISH 39 [Ping Test] Check your network status with the ping test. [Port Control] Unused ports can be blocked for network security. [Connection Domain] Change domain for checking network connection. NOTE •• A reboot is recommended for the settings to be applied properly.
  • LG 27TNF3K-S | Owners Manual - Page 53
    terms of service. For details, contact your ISP. •• LG is not responsible for any malfunction of the display or Internet connection failures due to communication errors/ malfunctions associated with your Internet connection or other connected equipment. •• LG is not responsible for problems within
  • LG 27TNF3K-S | Owners Manual - Page 54
    as Wi-Fi devices. •• The wireless network service may run slowly depending on the surrounding wireless a wireless router, a router that supports wireless connection is necessary; the wireless devices correctly by referring to their user guides before configuring the network connection. •• The
  • LG 27TNF3K-S | Owners Manual - Page 55
    screen, the screen location moves by 4 pixels in a regular order. (This item is inactivated when the current input is No Signal.) (It only supports the models for exterior use.) •• [White Wash]: Displays a white pattern to remove image sticking. •• [User Image]: Plays the desired image from a USB
  • LG 27TNF3K-S | Owners Manual - Page 56
    file in the "ISM" folder on your USB storage device. •• Delete the existing contents stored on the internal memory before downloading a new video file. •• Supported video file formats: "MP4", "AVI", "MKV", "MPEG", "TS" •• You can download only 1 video. •• If a video is deleted or does not exist, the
  • LG 27TNF3K-S | Owners Manual - Page 57
    44 ENGLISH * How to reset or delete User Image / User Video •• Reset using [Admin] [Factory Reset] •• Open the Player app > Click "Delete" button at the top right of the screen > Delete downloaded image / video [Screen Fault Detection] •• The screen fault detection feature determines whether
  • LG 27TNF3K-S | Owners Manual - Page 58
    limited to 15 characters. •• [Check] button: The button used to complete and apply the Beacon settings. NOTE •• Some models do not support background screening services in iOS. •• A reboot is recommended for the settings to be applied properly. •• The UUID value is hexadecimal and the exact number
  • LG 27TNF3K-S | Owners Manual - Page 59
    •• Depending on the model, it can be displayed as [PC/OPS Control]. •• Depending on the supported interface, the sub-menu of [Control Interface Selection] may be different. •• The PC products that support the power control are MP500/MP700, and you have to purchase them separately if necessary. •• If
  • LG 27TNF3K-S | Owners Manual - Page 60
    47 ENGLISH [Input Manager] You can set the PC or DTV label for each external input. [SIMPLINK Setup] •• When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage. •• [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All
  • LG 27TNF3K-S | Owners Manual - Page 61
    ENGLISH 48 -- [Type]: -- [Method]: Connection direction can be selected. ([Device to Fusion], [Fusion to Device]) -- [Device to Fusion]: How to connect from set to server -- [URL]: Server URL -- [Port]: Server Port -- [Fusion to Device] : How to connect from server to set •• [Auto Discovery]: The
  • LG 27TNF3K-S | Owners Manual - Page 62
    School], [Control Room]: displays the mode optimized for the installing environment. •• [Calibration]: Allow an expert, or anyone who loves picture quality, to manually tune to the best picture quality. NOTE •• The type of [Picture Mode] you can select may vary depending on the model or input signal
  • LG 27TNF3K-S | Owners Manual - Page 63
    ENGLISH 50 [Customize] •• [Backlight]: Adjust the brightness of the screen by adjusting the brightness of the backlight. The closer the value is to 100, the brighter the screen is. •• [OLED Light]: Adjusts the brightness of the OLED panel to control the brightness of the screen. •• [LED Light]:
  • LG 27TNF3K-S | Owners Manual - Page 64
    ENGLISH 51 •• [Picture Option]: Customize the picture options. -- [Noise Reduction]: Remove randomly popping dots to make the picture look clearer. -- [MPEG Noise Reduction]: Reduce the noise generated in the process of creating a digital video signal. -- [Smooth Gradation]: Reduces step-shaped
  • LG 27TNF3K-S | Owners Manual - Page 65
    is enabled, the PIP mode of the multi-screen is unavailable. NOTE •• Depending on the model, the automatic screen rotation feature may not be supported. [External Input Rotation] •• This feature rotates the screen clockwise. •• You can set this feature to Off/90/180/270. •• Setting External Input
  • LG 27TNF3K-S | Owners Manual - Page 66
    . •• HDMI input port 1, 2 is best suited for high definition videos that are 4K@60 Hz (4:4:4, 4:2:2). However, video or audio may not be supported depending on the specifications of the external device. If this is the case, please connect the device to a different HDMI port. •• This feature may not
  • LG 27TNF3K-S | Owners Manual - Page 67
    54 ENGLISH No. Item 1 [Tiling Type] Description Select and set the mode according to the installation type of your Signage. •• Stand-alone: Select and use this mode when you use only one unit. •• Video Wall: Select and use this mode when using two or more multi-screen configurations. This mode
  • LG 27TNF3K-S | Owners Manual - Page 68
    needs time to recognize the pattern of the content. (The time may vary depending on the duration of the content.) •• The [Screen Shift] feature is supported only for the stand-alone configuration or for use in a single DP daisy chain. That is, if [Tile Mode] is enabled, the [Screen Shift] feature
  • LG 27TNF3K-S | Owners Manual - Page 69
    the user's installation environment. -- [Manual] : User can adjust range(maximum, minimum) by manually, According to the user's installation Analog Signage BLU. -- On/Off Time Setting: Adjusts the schedule of the BLU. -- BLU Manual On/Off: Use the On or Off setting to set the BLU to On or Off without
  • LG 27TNF3K-S | Owners Manual - Page 70
    signal is entered. Even if the monitor's picture mode has been changed by the HDMI IT Contents feature, you can change the picture mode again manually. As this has a higher priority than the picture mode set by the user, the existing picture mode may be changed when the HDMI signal changes
  • LG 27TNF3K-S | Owners Manual - Page 71
    to music. •• [Game]: Optimize sound for playing video games. [Balance] •• [Balance]: Adjust the output volume for the left speaker and the right speaker. [Equalizer] •• [Equalizer]: Manually adjust sound by using the equalizer. [Reset] •• [Reset]: Resets sound settings.
  • LG 27TNF3K-S | Owners Manual - Page 72
    to the digital audio output port. •• [No Speaker]: It does not support the Main Speaker. NOTE •• Some recently connected devices may automatically attempt is turned on. •• It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting
  • LG 27TNF3K-S | Owners Manual - Page 73
    ENGLISH 60 [Audio Out] [Sound] [Audio Out] •• [Off]: Disables the use of [Audio Out]. (No audio outputted.) •• [Variable]: You can specify an output range for the external audio device connected to the monitor and adjust the volume within the range. You can change the volume of an external audio
  • LG 27TNF3K-S | Owners Manual - Page 74
    ENGLISH 61 [Digital Sound Output] [Sound] [Digital Sound Output] Enables you to configure the settings for Export Digital Sound. • • [Sound] This can be set if [Sound Out] is optical digital/HDMI ARC. •• Sound effect output may not work if using Pass Through. •• The codec which is being
  • LG 27TNF3K-S | Owners Manual - Page 75
    ENGLISH 62 [OSD Lock] This feature enables you to configure the OSD lock feature so that settings or content cannot be changed. •• Press and hold the Settings key for at least 10 seconds and enter password to access the settings menu in OSD Lock. [IR Operation Lock] •• If you set this feature to [
  • LG 27TNF3K-S | Owners Manual - Page 76
    a separate confirmation procedure. •• Update Detection Notification: Sets whether to Enable/Disable the update detection notification. •• CHECK FOR UPDATES: Manual checks for available updates in the server. This feature is available only when network is connected. [Enterprise Settings] •• Enter
  • LG 27TNF3K-S | Owners Manual - Page 77
    ENGLISH 64 [IDPS Settings] •• IDPS can be activated or deactivated by choosing On/Off [Install Admin Certificate] •• Administrator must install administrator certificate before applying administrator IDPS rule. [Update IDPS Rule Package] •• In addition to the default rules, new security rules set
  • LG 27TNF3K-S | Owners Manual - Page 78
    player feature enables you to play/manage contents of video, image, template, SuperSign and playlist in an integrated way. (The OLED models do not support the playback and management of image content and template content.) [Continuous Play] 1 Select your desired type of content from the tab on the
  • LG 27TNF3K-S | Owners Manual - Page 79
    ENGLISH 66 [Delete] 1 Select your desired type of content from the tab on the left and click [Delete] in the upper right-hand corner of the screen. 2 Select the content you wish to delete. 3 Click [Delete] in the upper right-hand corner of the screen. 4 You can see that the content has been deleted
  • LG 27TNF3K-S | Owners Manual - Page 80
    ENGLISH 67 [Scheduler] (Scheduler) The Content Manager app's scheduler feature enables certain content to be played at a scheduled time through a playlist or external input. [Creating a Schedule] 1 Click [New Schedule] in the upper right-hand corner of the screen. 2 Choose between [Playlist] and [
  • LG 27TNF3K-S | Owners Manual - Page 81
    ENGLISH 68 [Delete Schedule] 1 Click [DELETE] in the upper right-hand corner of the screen. 2 Select the schedules you wish to delete. 3 Click [DELETE]. 4 Check that the schedules have been deleted. [Calendar View] 1 When you have registered schedules, click [Calendar View]. 2 You can see that the
  • LG 27TNF3K-S | Owners Manual - Page 82
    -1, MPEG-2 MPEG-1 Layer I, II, MPEG-1 Layer III (MP3) MPEG-1, MPEG-2 Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM •• Dolby AC-4: Some models may not be supported. Maximum transmit ratio Full HD movie ULTRA HD movie (UHD models only.) H.264 1920 x 1080@60P BP/MP/[email protected] 40Mbps HEVC 1920 x 1080@60P
  • LG 27TNF3K-S | Owners Manual - Page 83
    , .ts Video Audio Codec H.264/AVC, HEVC Dolby Digital, Dolby Digital Plus, AAC •• Only Window Media Audio V7 and later are supported. •• The AAC Main Profile is not supported. •• Video files created by some encoders may not be played. •• Video files in a different format than specified may not be
  • LG 27TNF3K-S | Owners Manual - Page 84
    may not be recognized. •• Please connect a USB storage device with the cable offered by the device maker. •• Some USB storage devices may not be supported or operated smoothly. •• File alignment methods of the USB storage device is similar to Windows and filenames can include up to 100 English
  • LG 27TNF3K-S | Owners Manual - Page 85
    ] feature does not work, turn the hard disk off and on again to make it work properly. •• USB storage devices (USB 2.0 or below) are also supported. However, they may not work properly in the videos list. •• A maximum of 999 folders or files can be recognized under one folder. •• When distributing
  • LG 27TNF3K-S | Owners Manual - Page 86
    ENGLISH 73 Group Manager 2.0 This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the
  • LG 27TNF3K-S | Owners Manual - Page 87
    ENGLISH 74 [GROUP MANAGEMENT] •• Creating a New Group 1. C lick [Add New Group]. 2. E nter a group name. 3. C lick [Add Device], select the devices you wish to add to the group, and add them. 4. C lick [Done], and you will see that a new group has been created. •• Editing a Group 1. C lick the
  • LG 27TNF3K-S | Owners Manual - Page 88
    ENGLISH 75 [Setting Data Cloning] 1 Select your desired group and click Clone. 2 Check that the data have been copied on the slave sets. [Content Distribute] 1 Select the type of content you wish to distribute (Schedules or Playlists). 2 Select the content you wish to distribute. 3 Select the group
  • LG 27TNF3K-S | Owners Manual - Page 89
    off the background music through [THEME SOUND]. •• A total of 5 themes ([Sunny Day], [Rainy Day], [Art Gallery], [Art Photos], and [Colorful Spring]) are available, and the supported images are as follows.
  • LG 27TNF3K-S | Owners Manual - Page 90
    connection such as WiDi or Miracast. How to Use [Screen Share] [Screen Share] 1 Connect according to the instructions provided by the guide that can be accessed through the CONNECTION GUIDE button in the upper right. 2 Once the connection is established, Screen Share between the user device and the
  • LG 27TNF3K-S | Owners Manual - Page 91
    the address bar of your web browser. NOTE •• This feature may not be supported depending on the product. •• Only PC screen sharing is supported. Audio sharing is not supported. •• Some web browsers do not support screen sharing. We recommend using the latest version of Chrome. •• When connecting via
  • LG 27TNF3K-S | Owners Manual - Page 92
    the status of the display through the Web browser. This function is available for PCs and mobile devices. Different features are supported depending on the product. Function •• [Dashboard]: Display a summary of the product's status and provides links to each page. •• [Display & sound]: Provides
  • LG 27TNF3K-S | Owners Manual - Page 93
    ENGLISH 80 Picture ID AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with RS-232CIN RS-232C IN RS-232C IN an IR
  • LG 27TNF3K-S | Owners Manual - Page 94
    to a PC with a USB cable (Type A to Type B) allows you to control the connected PC by touching the screen of the product. For a PC that supports USB-C, use a USB-C cable to connect this product to the PC and control the PC using the touch screen. If your product is equipped with
  • LG 27TNF3K-S | Owners Manual - Page 95
    the target. -- Please set the target to 3,000K in the broadcasting station environment. -- [Reference RGB]: Saves and resets the currently set Manual Calibration value during Smart Calibration. 3 With [START SMART CALIBRATION], you can correct the color/brightness. 4 If you set the [Schedule Setting
  • LG 27TNF3K-S | Owners Manual - Page 96
    ENGLISH 83 [Manual Calibration] You can manually adjust the color of the selected location. •• [Screen Split]: Set the manual adjustment area. •• [Calibration Position]: Select the manual adjustment location. Screen Split: 4, Calibration Position: 3 Screen Split: 9, Calibration Position: 5
  • LG 27TNF3K-S | Owners Manual - Page 97
    ENGLISH 84 IR CODE •• All models do not support the HDMI/USB function. •• Some key codes may not be supported depending on the model. Code (Hex) 08 C4 C5 95 0B 10 11 12 13 14 15 16 17 18 19 02 03 E0 E1
  • LG 27TNF3K-S | Owners Manual - Page 98
    Code (Hex) 43 99 40 41 06 07 44 28 7B 5B 72 71 63 61 5F 3F 7C 97 96 Function (Settings/Menu) Auto Configuration (Up) (Down) (Right) (Left) (OK) (BACK) Tile Exit Picture ID On (red) Picture ID Off (green) Yellow Blue W.Bal (S.Menu) (Home) Swap Mirror 85 Remarks Remote control button Remote control
  • LG 27TNF3K-S | Owners Manual - Page 99
    ENGLISH 86 CONTROLLING MULTIPLE PRODUCTS •• This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being
  • LG 27TNF3K-S | Owners Manual - Page 100
    ENGLISH Communication Parameter Baud Rate: 9600 BPS Data Length: 8 bits Parity Bit: None Stop Bit: 1 bit Flow Control: None Communication Code: ASCII 87 NOTE •• When using 3-wire connections (non-standard), an IR daisy chain cannot be used. •• Be sure to only use the provided gender to connect
  • LG 27TNF3K-S | Owners Manual - Page 101
    ENGLISH 88 Command Reference List 01 [Power] 02 Select Input 03 [Aspect Ratio] 04 [Brightness Control] 05 [Picture Mode] 06 [Contrast] 07 [Brightness] 08 [Sharpness] 09 [Color] 10 [Tint] 11 [Color Temperature] 12 [Balance] 13 [Sound Mode] 14 [Mute on] 15 Volume Control 16 [Current
  • LG 27TNF3K-S | Owners Manual - Page 102
    89 ENGLISH 26 [Software Version] 27 [White Balance] Red Gain 28 [White Balance] Green Gain 29 [White Balance] Blue Gain 30 [White Balance] Red Offset 31 [White Balance] Green Offset 32 [White Balance] Blue Offset 33 [Backlight] 34 [Screen Off] 35 [Tile Mode] 36 Check [Tile Mode] 37 [Tile ID] 38 [
  • LG 27TNF3K-S | Owners Manual - Page 103
    90 ENGLISH 51 [Power On Status] 52 Wired [Wake On LAN (Networked Standby Mode)] 53 [Screen Rotation] 54 [Time Sync] 55 [Contents Sync] 56 [LAN Daisy Chain] 57 [External Input Rotation] 58 [Beacon] 59 [Brightness Scheduling] Mode 60 [Brightness Scheduling] 61 [Multi Screen] Mode & Input
  • LG 27TNF3K-S | Owners Manual - Page 104
    91 ENGLISH 75 [Play Backup Content] 76 [Digital Audio Input] 77 [Booting Logo Image] 78 [SoftAP] 79 [Natural Size] 80 Play Saved Internal Media 81 [No Signal Image] 82 [Audio Out] [DPM (Standby Mode) Wake Up 83 Control] 84 Check [Fan] Failure 85 [Apply to all inputs] 86 [Timer Power On] 87 [Timer
  • LG 27TNF3K-S | Owners Manual - Page 105
    Video Position s n, 8f 129 [SI Server Setting] s n, ca * Note Commands may not work when there is no external input used. * Some commands may not be supported on some models. 00 to 01 Data (Hexadecimal) 00 to 01 FF 00 to 01 00 to 02 See [HDR Picture Mode] 00 to 01
  • LG 27TNF3K-S | Owners Manual - Page 106
    mode via RS-232C, you can check the value currently set for the relevant feature (not applicable to some features). * Some commands may not be supported on some models.
  • LG 27TNF3K-S | Owners Manual - Page 107
    W, webOS Player returns NG. * If it says "Read" from the IDB mode, it will respond as a PC Label type. * The SI App only supports Set operations over RS232C. 03. [Aspect Ratio] (Command: k c) Adjusts the aspect ratio of your monitor. Transmission (k)(c)( )(Set ID)( )(Data)(Cr) Data 02: [Full
  • LG 27TNF3K-S | Owners Manual - Page 108
    ENGLISH 95 05. [Picture Mode] (Command: d x) Selects a picture mode. Transmission (d)(x)( )(Set ID)( )(Data)(Cr) Data 00: [Mall/QSR] 01: [General] 02: [Gov./Corp.] 03: [Transportation] 04: [Education] 05: [Expert1] 08: [Auto Power Save] 11: [Calibration] 12: [Hospital] Acknowledgment (x)(
  • LG 27TNF3K-S | Owners Manual - Page 109
    ENGLISH 96 10. [Tint] (Command: k j) Adjusts the screen tints. Transmission (k)(j)( )(Set ID)( )(Data)(Cr) Data 00-64: Tint Red 50-Green 50 Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) 11. [Color Temperature] (Command: x u) Adjusts the screen color temperature. Transmission (x)(u)( )(Set ID)(
  • LG 27TNF3K-S | Owners Manual - Page 110
    product's release year. * Enter "fa [Set ID] ff" to view Clock 1 (year/month/day) settings. 2. When Setting Auto Time Data1 00: [Auto] 01: [Manual] * To view the set value of the Auto time, enter "fa [Set ID] 00 ff". Acknowledgment 1. (a)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x) 2. (a)( )(Set
  • LG 27TNF3K-S | Owners Manual - Page 111
    Data)(Cr) Data IR_KEY_CODE Acknowledgment (c)( )(Set ID)( )(OK/NG)(Data)(x) * For key codes, see IR Codes. * Some key codes may not be supported depending on the model. 26. [Software Version] (Command: f z) Checks the software version of the product. Transmission (f)(z)( )(Set ID)( )(Data)(Cr) Data
  • LG 27TNF3K-S | Owners Manual - Page 112
    ENGLISH 27. [White Balance] Red Gain (Command: j m) Adjusts the red gain value for white balance. Transmission (j)(m)( )(Set ID)( )(Data)(Cr) Data 00-FE: R ed Gain 0-254 FF: C hecks red gain value Acknowledgment (m)( )(Set ID)( )(OK/NG)(Data)(x) 99 30. [White Balance] Red Offset (Command: s x)
  • LG 27TNF3K-S | Owners Manual - Page 113
    100 ENGLISH 33. [Backlight] (Command: m g) Adjusts the backlight brightness. Transmission (m)(g)( )(Set ID)( )(Data)(Cr) Data 00-64: Backlight 0-100 Acknowledgment (g)( )(set ID)()(OK/NG)(Data)(x) 34. [SCREEN OFF] (Command: k d) Turns off/off the screen. Transmission (k)(d)( )(Set ID)( )(Data)(Cr
  • LG 27TNF3K-S | Owners Manual - Page 114
    signals may not be available for all models. * The data number (N) may vary depending on the model. (The data number depends on the number of supported input signals.) * This feature operates as the last input, and
  • LG 27TNF3K-S | Owners Manual - Page 115
    ) Data 1 00: Screen Fault Detection result NG 07: Screen Fault Detection result OK * When screen Fault Detection is set to Off or not supported, execution results are rendered "NG." Data 16(for checking the humidity value) Data 1 0~100: Reads the %RH value of the current humidity (indicated
  • LG 27TNF3K-S | Owners Manual - Page 116
    ] 90: [User Image] 91: [User Video] Acknowledgment (p)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. * "02: [Orbiter]" is not supported while "91: [User Video]" is turned on.
  • LG 27TNF3K-S | Owners Manual - Page 117
    ff 4. DNS setting: sn 01 81 156147035018 (DNS: 156.147.35.18) 5. Applying the settings: sn 01 82 80 (applies the saved IP mode (auto/manual), subnet mask, and gateway), sn 01 82 81 (applies the saved DSN) * Each IP address contains 12 decimal digits. Acknowledgment (n)( )(Set ID)( )(OK/NG)(Data1
  • LG 27TNF3K-S | Owners Manual - Page 118
    ENGLISH 54. [Time Sync] (Command: s n, 16) Sets Time Sync. Transmission (s)(n)( )(Set ID)( )(1)(6)( )(Data)(Cr) Data 00: [Off] 01: [On] * This feature only works when the monitor is in Master mode. * This feature does not work if the current time is not set. Acknowledgment (n)( )(Set ID)( )(OK/NG
  • LG 27TNF3K-S | Owners Manual - Page 119
    )( )(Data1)(Data2)(Data3) (Data4)(Data5)(x) * This feature may not be available for all models. * Only the input modes supported by the model works. * This feature operates as the last input, and supports data in DTV format. * When the Read operation is performed, 00 is returned if it is not for an
  • LG 27TNF3K-S | Owners Manual - Page 120
    ENGLISH 62. [Aspect Ratio] (Multi screen) (Command: x d) Controls the aspect ratio of Multi Screen. Transmission (x)(d)( )(Set ID)( )(Data1)( )(Data2)(Cr) Data1 01: C ontrols the Main input 02: C ontrols the Sub1 input 03: C ontrols the Sub2 input 04: C ontrols the Sub3 input Data2 00: F ull
  • LG 27TNF3K-S | Owners Manual - Page 121
    ENGLISH 108 69. [Holiday Setting] (Command: s n, 9b) Sets holidays. Transmission 1. (s)(n)( )(Set ID)( )(9)(b)( ) (Data1)( )(Data2)( )(Data3)( ) (Data4)( )(Data5)( )(Data6)(Cr) 2. (s)(n)( )(Set ID)( )(9)(b)( )(Data1)( )(Data2)(Cr) 3. (s)(n)( )(Set ID)( )(9)(b)( )(Data1)(Cr) 1. Setting a Holiday
  • LG 27TNF3K-S | Owners Manual - Page 122
    ENGLISH 70. [UPnP] (Command: s n, 9c) Sets UPnP.mode. Transmission (s)(n)( )(Set ID)( )(9)(c)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(9)(c)(Data)(x) * This feature may not be available for all models. * Changing UPnP mode results in a reboot. 109 73. [Wi-Fi
  • LG 27TNF3K-S | Owners Manual - Page 123
    ENGLISH 110 75. [Play Backup Content] (Command: s n, a1) When there is no input signal, this feature automatically plays the content stored in the device or runs the set app. Transmission 1. (s)(n)( )(Set ID)( )(a)(1)( )(Data1)(Cr) 2. (s)(n)( )(Set ID)( )(a)(1)( )(Data1)(Data2)(Cr) 1. Disabling
  • LG 27TNF3K-S | Owners Manual - Page 124
    ENGLISH 79. [Natural Size] (Command: s n, a5) Sets the Natural Size feature. Transmission (s)(n)( )(Set ID)( )(a)(5)( )(Data)(Cr) Data 00-64: Natural Size 0 - 100 Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(5)(Data)(x) * This feature may not be available for all models. 111 82. [Audio Out] (
  • LG 27TNF3K-S | Owners Manual - Page 125
    112 ENGLISH 85. [Apply to all inputs] (Command: s n, 52) Apply the video mode and low value of the current input to the same video value of all inputs. Transmission (s)(n)( )(Set ID)( )(5)(2)( )(Data)(Cr) Data 01: Apply Acknowledgment (n)( )(Set ID)( )(OK/NG)(5)(2)(Data)(x) * This feature may not
  • LG 27TNF3K-S | Owners Manual - Page 126
    113 ENGLISH 87. [Time to OFF] Scheduling (Command: f e) Sets Off Timer settings. Depending on the model, the number of schedules for Timer Power Off can be either 16 or 21. Transmission (f)(e)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) Data1 1. To f1h ~ ffh, a1h ~ a6h (data reading) F1 ~ FF:
  • LG 27TNF3K-S | Owners Manual - Page 127
    ENGLISH 114 91. Change SetID (Command: j x) Changes and checks SetID. 1. When it is a general LED model Transmission (j)(x)( )(Set ID)( )(Data1)( )(Data2)(Cr) Data1 Data2: 00 01 ~ 03 e8 (1~1000) Acknowledgment (x)( )(Set ID)( )(OK/NG)(Data1)(Data2)(x) 2. When it is another model (read only)
  • LG 27TNF3K-S | Owners Manual - Page 128
    96. [Input Manager] (Command: s n, b1) It sets labels by input. Transmission (s)(n)( )(Set ID)( )(b)(1)( )(Data1)( )(Data2)(Cr) Data1 90: HDMI1 91: HDMI2 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D 97: HDMI3/HDMI2/DVI-D 98: OPS 99: HDMI2/OPS C0: DISPLAYPORT C1: DISPLAYPORT/USB-C C2: HDMI3 C3:
  • LG 27TNF3K-S | Owners Manual - Page 129
    )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(5)(Data)(x) * Depending on the model, some picture modes may not be supported. * It works only when the HDR content is running. 107. [LED Local Dimming] (Command: s n, c6) Sets the LED Local Dimming. (A feature to set
  • LG 27TNF3K-S | Owners Manual - Page 130
    1 00~64: Range control Acknowledgement (n)( )(Set ID)( )(OK/NG)(a)(b)(Data1)(Data2)(x) * This feature may not be available for all models. * Data2 only supports Hex values that are multiples of 5. * The range of minimum brightness value cannot exceed the range of maximum brightness, and the range of
  • LG 27TNF3K-S | Owners Manual - Page 131
    09: PQ900 0A: PQ1000 0B: PQ2000 0C: PQ4000 0D: PQ10000 0E: HLG Acknowledgment (n)( )(Set ID)( )(OK/NG)(e)(d)(Data)(x) * It may not be supported depending on the model. 121. Phase Shift (Command: s n, ee) Sets the phase shift value. Transmission (s)(n)( )(Set ID)( )(e)(e)( )(Data)(Cr) Data 0000~0168
  • LG 27TNF3K-S | Owners Manual - Page 132
    55) Sets the Smart Brightness Control. Transmission (s)(n)( )(Set ID)( )(5)(5)( )(Data)(Cr) Data 00: Manual 01: Highlight 02: Basic 03: Nearby Acknowledgment (n)( )(Set ID)( )(OK/NG)(5)(5)(Data)(x) * It may not be supported depending on the model. 126. Macro Preset (Command: s n, 8d) Sets the Macro
  • LG 27TNF3K-S | Owners Manual - Page 133
    )(Cr) Data1+Data2 0000~01BC: -222~222 (4K) 0000~00DE: -111~222 (2K) Acknowledgment (n)( )(Set ID)( )(OK/NG)(8)(f)(Data1)(Data2)(x) * It may not be supported depending on the model. * The data ranges of the 4K and 2K models are different. * The minimum range value for each model corresponds to
  • LG 27TNF3K-S | Owners Manual - Page 134
    121 ENGLISH TROUBLESHOOTING »»Each model may have different points to check. »»For PC(graphics card) has been installed. -- Check if the plug and play function is supported by the PC(graphics card) user manual. Issues Related to Screen (Video) •• A message saying 'No signal' or 'Invalid Format
  • LG 27TNF3K-S | Owners Manual - Page 135
    correctly because the atypical aspect ratio is not supported before the graphics card driver is configured. This is not a problem of the product; it is due to mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu. •• The image is not displayed. --
  • LG 27TNF3K-S | Owners Manual - Page 136
    ENGLISH 123 Issues Related to Screen (Color) •• Screen has poor color resolution (16 colors). -- Use PC settings to set the color to 24 bits (True Color) or above. •• Screen color is unstable or mono-colored. -- Check the connection status of the signal cable. Or, re-insert the PC graphics card. ••
  • LG 27TNF3K-S | Owners Manual - Page 137
    ENGLISH 124 Other Issues •• The power suddenly turned off. -- Check if the auto-off function is activated on the settings related time. -- Power source has not being supplied properly. See if the product power cord is connected properly. -- Check the power control settings. -- If the internal
  • LG 27TNF3K-S | Owners Manual - Page 138
    . Change your tablet PC settings. •• Multi-touch does not respond. -- The content played (e.g. Paint, etc.) may not support Multi-touch points. Make sure that you use a content that supports Multi-touch point. -- Remove the USB cable and connect it again in 10 seconds. -- Run the content (e.g. Paint
  • LG 27TNF3K-S | Owners Manual - Page 139
    changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once
  • LG 27TNF3K-S | Owners Manual - Page 140
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
OWNER’S MANUAL
LG Digital Signage
(MONITOR SIGNAGE)
27TNF3K
www.lg.com
Copyright © 2023 LG Electronics Inc. All Rights Reserved.
Please read the user manual before using this product to ensure safe and convenient
use.