LG 37LD330H Setup Guide
LG 37LD330H Manual
 |
View all LG 37LD330H manuals
Add to My Manuals
Save this manual to your list of manuals |
LG 37LD330H manual content summary:
- LG 37LD330H | Setup Guide - Page 1
32LD330H 37LD330H Lodging Guest Interactive Pro:Centric™ TVs Commercial Mode Setup Guide Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER Commercial Mode Setup pages 12 - 13 Cloning Information pages 23 - 28 FTG Mode of Operation pages - LG 37LD330H | Setup Guide - Page 2
of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE - LG 37LD330H | Setup Guide - Page 3
in accordance with the manufacturer's instructions. 8. Do not install near any to install the TV by the hanging power and signal cables on the back of the TV. 16. page of the Owner's Manual to be certain. Periodically with an exact replacement part by an authorized servicer. Protect the power cord - LG 37LD330H | Setup Guide - Page 4
SAFETY INSTRUCTIONS ( information with respect to proper grounding of the mast and supporting structure, grounding of the leadin wire to an antenna- Electric Service Equipment Grounding Conductor (NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) - LG 37LD330H | Setup Guide - Page 5
by qualified TV electronics technicians. • Refer to the Owner's Manual for additional information on TV features, specifications, maintenance, and safety instructions. • For additional information, contact your LG representative. Note: Design and specifications subject to change without prior - LG 37LD330H | Setup Guide - Page 6
of your institution and configure display features for the end user). Software Installation __ Install or configure any software, as panel and RF antenna on MPI/PPV card. __ Make all connections to signal, interactive resources, and Aux sources, as appropriate. Commercial Mode Setup Overview This - LG 37LD330H | Setup Guide - Page 7
complete listing of hotel services and amenities. The Pro:Centric TV is connected to the hotel's billing computer, and service/amenities charges are billed at interactive menus. Channel Guide Shows available TV networks and channels. When available, electronic program guide (EPG) data indicates - LG 37LD330H | Setup Guide - Page 8
output for controlling an auxiliary device. RESET UPDATE HDMI 2 .......... HDMI /DVI IN 1 .......... RGB IN (PC) SPEAKER OUT ( 8 ) RS-232C IN (SERVICE ONLY) ......... REMOTE CONTROL OUT AV IN 1 VIDEO L/MONO-AUDIO-R AUDIO IN (RGB/DVI) MPI Y PB PR VIDEO L R AUDIO COMPONENT IN RS - LG 37LD330H | Setup Guide - Page 9
Side Connections Panel / RF Antenna Connection USB IN Side Connections Panel USB IN Insert USB memory device for software updates, cloning purposes, or picture/music entertainment, as applicable. VIDEO L/MONO -AUDIO- R RF Antenna Connection AV IN 2 Antenna or CATV ANTENNA IN A/V 2 Input L/ - LG 37LD330H | Setup Guide - Page 10
Configuration Application utilities. Installer Remote The LG Installer Remote is supplied with and 's clonable features need to be configured as part of the Commercial Mode Setup. This is cloned TVs will all have problems. Pages 23 to 28 provide GUIDE CC ENTER RETURN SAP EXIT RATIO EJECT 206-4185 - LG 37LD330H | Setup Guide - Page 11
Typical Key Functions The LG Installer Remote illustrated below and throughout this document shows typical remote control INPUT TV 123 456 789 0 FLASHBK INFO i P VOL PORTAL CH A G E MUTE MENU GUIDE CC ENTER RETURN SAP EXIT RATIO EJECT NUMBER Buttons (0 - 9) & DASH Use to enter - LG 37LD330H | Setup Guide - Page 12
digital channels: Go to the Channel Menu, select the Auto Tuning option, and follow the on-screen instructions. xxLD330H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 ASIC 20E7 PTC V1. features to the desired configuration for the end user. (Continued on next page) 12 206-4185 - LG 37LD330H | Setup Guide - Page 13
Channel-Time on-screen display. Identifiable labels (logos) should enable the end user to readily know what common networks are available. (You can add the channel for channels without icons in step 5.) CHANNEL Auto Tuning Manual Tuning Channel Edit Channel Label Move Enter Run Auto Tuning, - LG 37LD330H | Setup Guide - Page 14
TV are reset to their default values; that is, the Lock System, if previously enabled from the Lock setup menu (see the Owner's Manual for additional information), will now be disabled, and the individual Parental Control settings will be restored to default values. xxLD330H PTC INSTALLER MENU 000 - LG 37LD330H | Setup Guide - Page 15
Installer Menu (Cont.) Installer Menu Items 000 through 071 Menu Item 000 001 002 003 Function INSTALLER SEQ POWER MANAGE AC ON BAND/AFC 004 STRT CHANNEL 005 CHAN LOCK 007 STRT VOLUME 008 MIN VOLUME 009 MAX VOLUME 010 MUTE DISABLE 011 KEY DEFEAT 015 SLEEP TIMER 016 EN TIMER 017 ALARM 020 - LG 37LD330H | Setup Guide - Page 16
User programmable number, most significant byte. 0 User programmable number, most significant byte - 1. 0 User programmable number, most significant byte - 2. 0 User 17 for Auto Configure. 1 If set to 1, audio is muted if no signal is present. 0 If set to 1, keyboard is locked out, IR is - LG 37LD330H | Setup Guide - Page 17
range is 0 to 63, with 63 as the default, which gives the user the full range of volume control, if item 008 MIN VOLUME is also 011 - KEY DEFEAT (Keyboard Defeat) If set to 1, KEY DEFEAT prevents the end user from accessing the on-screen menus from the display panel-MENU, ENTER, and menu navigation - LG 37LD330H | Setup Guide - Page 18
) * If set to 1, the Timer function is available to the end user and enabled continuously. Set to 0 to disable On/Off timers. Note: Clock remotes are not available for the current release. For additional information, contact your LG representative. 021 - V-CHIP (Parental Control) * Set to 1 to - LG 37LD330H | Setup Guide - Page 19
088 - EN NOISE MUTE (Enable Noise Mute) If set to 1, audio mutes if no signal is present. 073 - CH NOT AVBLE (Channel Not Available) If set to 1 and to serial number. 081 - UPN LSB (UPN Least Significant Byte) User programmable number, least significant byte readable by MPI command. Note: Not - LG 37LD330H | Setup Guide - Page 20
lighting is controlled via the Picture settings in the TV's setup menus. 102 - ATSC BAND Sets up TV to receive different types of incoming signals: 0 = Broadcast, 1 = CATV, 2 = HRC, 3 = IRC, 4 = Same as NTSC. 103 - ATSC TUNE MODE Sets ATSC tuning mode. Default set to 1 for Physical Channel scan. Set - LG 37LD330H | Setup Guide - Page 21
TV. Press MENU on the Installer Remote to access the TV setup menus, and set the TV features to the desired configuration for the end user. CHANNEL PICTURE AUDIO TIME LOCK OPTION INPUT MY MEDIA Refer to the Owner's Manual for further information on the TV setup menus. 206-4185 21 - LG 37LD330H | Setup Guide - Page 22
Channel Up/Down to select the desired channel. 2. Press the Left or Right arrow repeatedly until the numbers 1 to 7 appear on the display. The number shows the position of the character that can be changed. Number 1 is the first character, number 2 the second character, etc. 3. Use the Up/Down arrow - LG 37LD330H | Setup Guide - Page 23
screen shows the proper message when cloning. If the message indicated does not appear, there is a problem with both Master and Target TVs-If using a clone programmer, ensure the TV signal source is either an Aux or TV (RF) source. If a Auto Tuning (Channel Lineup) Manual Tuning Channel Edit Channel - LG 37LD330H | Setup Guide - Page 24
before beginning any cloning procedures. • You may edit a filename as part of the Learning procedure; however, a file with edited contents will not TV's clock using a USB memory device. Either set a Target TV's clock manually, or use the Auto Clock setting in the TV setup menus. Learn Setup from - LG 37LD330H | Setup Guide - Page 25
Cloning Procedures (Cont.) Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer Warning: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs, as this will damage the clone programmer and the PPV card. Cloning is accomplished using the TV/ clone - LG 37LD330H | Setup Guide - Page 26
's internal clock- accurate to within one minute. Since the TLL-1100A's time cannot be set directly, the current time needs to be copied from an LG TV equipped with an enabled MPI port. After the time is copied to the TLL-1100A clone programmer, the current time will be maintained and - LG 37LD330H | Setup Guide - Page 27
green light indicates that there are communication problems between the TV and the LT2002 clone for a damaged cable, poor contacts, or other connection troubles. • If the status indicator is red, the TV MPI Jack and follow on screen instructions Status Indicator MPI • green • red Color - LG 37LD330H | Setup Guide - Page 28
to keep the time as accurately as possible.) Since the LT2002's time cannot be set directly, the current time needs to be copied from an LG TV equipped with an enabled MPI port. After the time is copied to the LT2002 clone programmer, the current time will be maintained and can - LG 37LD330H | Setup Guide - Page 29
User Guide for further information. While the TV is in FTG Mode: • Users can still access the Installer Menu using an LG the Free-To-Guest (FTG Configuration Application manual for further information on the FTG Configuration Shows that the TV is in Pass-through Mode. INPUT MY MEDIA 29 - LG 37LD330H | Setup Guide - Page 30
. Refer to the Free-To-Guest (FTG) Configuration Application manual for further information. See also FTG Configuration Application sample screens the right of the Chassis field under Installer Menu Templates, and select 32/37LD330H from the drop-down list of available models. • Click the Load button - LG 37LD330H | Setup Guide - Page 31
press ENTER. 4. Use the Up/Down arrow keys to select the FMA Configuration file you want to install, and then press ENTER. The TV will show Teaching completion progress in a new window. Do NOT remove the USB device until Teaching is complete. When Teaching is complete, the TV will tune to - LG 37LD330H | Setup Guide - Page 32
FTG Mode, you may need to perform some manual configuration on the TV before you start this procedure (see "Optional Manual Configuration / Setup for a TV" on following ENTER when you are ready to initiate Learning. The TV will show Learning completion progress in a new window. Do NOT remove the - LG 37LD330H | Setup Guide - Page 33
Set Installer Menu Items These steps provide specific instruction only on the Installer Menu items that should for these Installer Menu items. CHANNEL Auto Tuning Manual Tuning Channel Edit Channel Label Move Enter Run Auto support major or minor channel numbers higher than 255. 206-4185 33 - LG 37LD330H | Setup Guide - Page 34
channel numbers. Note: Write, Read, and Learn functions in the FTG Channel Map Configuration Utility are used for local FTG configuration of TVs that support a direct connection to a PC. These functions are not applicable to the process of creating an FMA Configuration file to be used with LD330H - LG 37LD330H | Setup Guide - Page 35
Utilities Overview (Cont.) FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel's Data and the FTG Channel Map. LOGICAL CHANNEL MAPPING Utility. * The FTG Configuration Application does not support major or minor channel numbers higher than 255. 206-4185 35 - LG 37LD330H | Setup Guide - Page 36
Write, Read, Learn, and IR Remote Access functions in the FTG Installer Menu Configuration Utility are used for local FTG configuration of TVs that support a direct connection to a PC. These functions are not applicable to the process of creating an FMA Configuration file to be used with LD330H TVs - LG 37LD330H | Setup Guide - Page 37
FTG Configuration Application Utilities Overview (Cont.) FMA Configuration Utility Note: FMA Write, Read, Clock, Broadcast, Firmware, and IP Communication functions in the FMA Configuration Utility are used to configure control equipment (Example: FMA-LG101) at the hotel/institution head end. These - LG 37LD330H | Setup Guide - Page 38
to apply to update this TV or press EXIT to cancel the update. instructed to do so or have previous experience with Expert Software Updates. • PTC SPI Boot LOGO ImTaVgeSoftware Update xxLD330HL_OvG1_O11I_mRaegvNeoD1o0w00n_lUoaSdB The TV will show update completion progress in a new window. Do - LG 37LD330H | Setup Guide - Page 39
in the USB device. Select the file you want to apply to update this TV or press EXIT to cancel the update. The TV will show download completion progress in a new window. Do NOT remove the USB device until the image download is complete. When the image download is complete, the - LG 37LD330H | Setup Guide - Page 40
099 Back Lighting (Static) 100 90 80 70 60 50 40 30 20 10 1 32LD330H 37LD330H Power Consumption (Watts) 72.97 63.82 58.53 53.58 44.24 41.27 099 Back Lighting (Dynamic) 200 190 180 170 160 150 140 130 120 110 101 32LD330H 37LD330H Power Consumption (Watts) 75.45 69.23 65.26 60.72 56.29 51.82 46 - LG 37LD330H | Setup Guide - Page 41
Reference: TV Camport Auto Sense Operation The Camport Auto Sense function is enabled when: 1. Installer Menu item 034 CAMPORT EN is set to 1 AND 2. Installer Menu item 040 AUTO CAMPORT is enabled (1). Selectable: Can be accessed with INPUT key, direct access, etc. Auto Sense: TV switches to this - LG 37LD330H | Setup Guide - Page 42
Reference: TV Aux Input Configuration DIRECT ACCESS Tuning TV OLD_ OCV = 0 130 OLD_ OCV = 1 90 131 91 132 92 Source Input Video2 (Side) Video1 (Rear) HDMI2 133 93 HDMI1/DVI Source Mode CV CV DTV/PC DTV/PC 134 94 RGB PC 136 96 Component ENABLE Installer Menu MPI DATA STATUS - LG 37LD330H | Setup Guide - Page 43
factory "IN- STOP" process that will reset the TV to Pass-through Mode. Contact technical support for the required value for Installer Menu item 117 and for additional information on performing the IN . Refer to the Pro:Centric™ Server Admin Client User Guide for further information. 206-4185 43 - LG 37LD330H | Setup Guide - Page 44
Troubleshooting General Troubleshooting Some Quick and Easy Tips for Resolving Problems not connected. Connections incorrect. Connect antenna/cable signal to TV Check connections on TV MPI not LG dealer. Picture Reception Normal picture, Audio muted. poor or no sound. Broadcast problem. - LG 37LD330H | Setup Guide - Page 45
Troubleshooting (Cont.) Troubleshooting Flow Chart Controller Quick Check STATUS LED on PTC No Board blinking? Yes TV connected Remote. TV No Bad responded? TV Yes Press VOLUME UP/ DOWN or MUTE key on User-supplied Remote. TV responded? No Bad PPV Card Yes End 206-4185 45 - LG 37LD330H | Setup Guide - Page 46
TV is in Commercial Mode. Continued to respond TV is not in Commercial Mode. Call Technical Support for assistance. FTG Operation Troubleshooting The following table provides troubleshooting information for when the TV is configured in the FTG Mode of operation. Symptom Communication Error - LG 37LD330H | Setup Guide - Page 47
Troubleshooting use an LG Installer Remote to operate clone programmer with TV. Clone menu does not display on TV screen, TLL1100A shows error Weak signal. Connect TV to a reliable analog channel signal source. No time set. Clone not working. Time not available. Clone programmer problem. - LG 37LD330H | Setup Guide - Page 48
service. COMPONENT VIDEO Uses three wires for transporting threecolor video signals. The end result is usually better video quality. COMPOSITE VIDEO Typical video jack, uses one wire for transporting three-color video signals. DELETE Lets you remove channels from the list that the end user can - LG 37LD330H | Setup Guide - Page 49
Document Revision History / Notes Document Revision History Date May 2011 Description Revision A: New document Product documentation is available online at: www.LGsolutions.com/products. From the Products page, select TVs, Systems & Solutions, then LCD TVs, then the applicable TV. Click the - LG 37LD330H | Setup Guide - Page 50
For Customer Support/Service, please call: 1-888-865-3026 www.LGsolutions.com Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric is a trademark of LG Electronics U.S.A., Inc. All other trademarks or registered trademarks are the property of their respective owners. ©
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
 |
 |
Commercial Mode Setup
pages 12 – 13
Cloning Information
pages 23 – 28
FTG Mode of Operation
pages 29 – 37
EXPERIENCED INSTALLER
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
Lodging Guest Interactive Pro:Centric™ TVs
© Copyright 2011, LG Electronics U.S.A., Inc.
P/N: 206-4185 (Rev A)
32LD330H
37LD330H