Home » LG Manuals » Flat Panel Televisions » LG 42LD320H » Manual Viewer

LG 42LD320H Setup Guide

LG 42LD320H Manual

View all LG 42LD320H manuals

Add to My Manuals
Save this manual to your list of manuals

LG 42LD320H manual content summary:

LG 42LD320H | Setup Guide - Page 1
26LD320H 32LD320H 37LD320H 42LD320H 32LD325H 37LD325H Lodging Guest Interactive Pro:Centric™ TVs Commercial Mode Setup Guide Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER Commercial Mode Setup pages 12 - 13 Cloning Information pages 27 - 32 b-
LG 42LD320H | Setup Guide - Page 2
For Customer Support/Service, please call: 1-888-865-3026 The latest product information and documentation is available online at: www.LGsolutions.com/products MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests
LG 42LD320H | Setup Guide - Page 3
Check the specification page of the Owner's Manual to be certain. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer
LG 42LD320H | Setup Guide - Page 4
the TV or hear strange sounds, unplug the power cord, and contact an authorized service center. 28. Do not press strongly on the panel with a hand or sharp object (e.g., a nail, pencil, or pen) or make a scratch on it. 29. Keep the product away from direct sunlight. 30. Dot Defect The Plasma or LCD
LG 42LD320H | Setup Guide - Page 5
to the Owner's Manual for additional information on TV features, speciﬁcations, maintenance, and safety instructions. • For additional information, contact your LG representative. For Customer Support/Service, please call: 1-888-865-3026 www.LGsolutions.com Note: Design and specifications subject to
LG 42LD320H | Setup Guide - Page 6
user Pro:Centric™ TVs for Commercial Mode TV and allows the hotel/institution head end equipment to communicate with the TV Master TV Setup for TV operation and set up TV TV models are equipped with the EBL Module, they can also be broadcast conﬁgured in FTG Mode by a Free-To-Guest Management Appliance
LG 42LD320H | Setup Guide - Page 7
GUIDE CC ENTER BACK SAP EXIT RATIO EJECT Important: Pro:Centric operation requires that Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL be set appropriately and that the TV hotel services and amenities. The Pro:Centric TV is connected to the hotel's billing computer, and service/
LG 42LD320H | Setup Guide - Page 8
IN 1 .......... RJP RGB IN (PC) SPEAKER OUT (8 ) REMOTE CONTROL OUT AUDIO IN (RGB/DVI) RS-232C IN (SERVICE ONLY) ......... AV IN 1 VIDEO L/MONO-AUDIO-R ANTENNA IN GAME CONTROL TV-LINK CFG Y PB PR VIDEO L R AUDIO COMPONENT IN ANTENNA IN 26LD320H only. Connect to Antenna/ CATV. RS
LG 42LD320H | Setup Guide - Page 9
updates, cloning purposes, or picture/music enter- tainment, as applicable. VIDEO L/MONO -AUDIO- R AV IN 2 RF Antenna & MPI Connections (32/37/42LD320H and 32/37LD325H TVs) Note: 26LD320H Antenna and MPI connections are on the rear jack panel (see previous page). Antenna or CATV 206-4163 MP
LG 42LD320H | Setup Guide - Page 10
LG DVD/VCR products. Cloning Cloning refers to the process of capturing a Master TV Setup and transferring it to a Target TV. The Master TV cloned TVs will all have problems. TV 123 456 789 0 FLASHBK VOL INFO i PORTAL MUTE P CH A G E MENU GUIDE CC ENTER BACK SAP EXIT RATIO EJECT 10
LG 42LD320H | Setup Guide - Page 11
players. EJECT Ejects a USB memory device, CD, DVD, VHS tape, as applicable. 206-4163 ALARM TIMER INPUT TV 123 456 789 0 FLASHBK VOL INFO i PORTAL MUTE P CH A G E MENU GUIDE CC ENTER BACK SAP EXIT RATIO EJECT NUMBER Buttons (0 - 9) DASH Use to enter a program number or channel. Dash is
LG 42LD320H | Setup Guide - Page 12
change back to 0 after the internal TV controller TV you are setting up. 117 FACT DEFAULT 001 003 BAND/AFC 00X Adjust the settings for these Installer Menu items. CHANNEL PICTURE AUDIO TIME LOCK OPTION INPUT MY MEDIA Set the TV features to the desired configuration for the end user
LG 42LD320H | Setup Guide - Page 13
Text Label "WXYZ" created in 2-5-4 + MENU (Add Channel Label) Mode. 028 CH. OVERIDE 000 After verifying the TV Setup, set Installer Menu item 028 CH. OVERIDE to 000.* * This step prevents end users from accessing channel settings (i.e., the Channel Menu will be inaccessible/ grayed out). 13
LG 42LD320H | Setup Guide - Page 14
the next page for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu Make sure the TV is ON. Using an Installer Remote, press MENU repeatedly until the on-screen setup menus lock up, and then press 9-8-7-6 + ENTER to access
LG 42LD320H | Setup Guide - Page 15
will respond. Set to 1 to enable V-Chip (Parental Control) functions. Sets number of V-Chip blocking hours. Set to 1 to retain caption setting set before TV turned OFF. If set to 0, limits direct access to favorite channels. Set to 1 to change MPI operation to OCV. If set to 1, changes MPI for
LG 42LD320H | Setup Guide - Page 16
TV tunes to Start Channel. 0 User programmable number, most significant byte. 0 User programmable number, most significant byte - 1. 0 User programmable number, most significant byte - 2. 0 User Mode. 100 Sets the level of the TV picture back lighting. (See detailed descriptions.) 4
LG 42LD320H | Setup Guide - Page 17
set to 63. It may be best to set the same value on every TV. Note: The minimum volume level cannot have a value setting higher than the - KEY DEFEAT (Keyboard Defeat) If set to 1, KEY DEFEAT prevents the end user from accessing the on-screen menus from the display panel-MENU, ENTER, and menu
LG 42LD320H | Setup Guide - Page 18
turned ON. Set to 1 to use the caption setting conﬁgured before the TV was turned OFF when the TV is turned ON. 028 - CH. OVERIDE (Channel Override) If set to 1, the user can select channels with either Channel Up/ Down or by direct keypad entry. If set to 0, only those channels that
LG 42LD320H | Setup Guide - Page 19
075 - REVERT CH (Revert to Start Channel) If set to 1 and loss of MPI communication occurs, TV automatically tunes to the specified Start Channel. 078 - UPN MSB (UPN Most Significant Byte) User programmable number, most significant byte readable by MPI command. Not linked to serial number. 079 - UPN
LG 42LD320H | Setup Guide - Page 20
program. If set to 255, back lighting is controlled via the Picture settings in the TV's setup menus. 102 - ATSC BAND Sets up TV to receive different types of incoming : MPI cards with b-LAN technology-LMT7Z5, LMT7Z7, LMT7Z9-are NOT supported on TVs in which the b-LAN module is embedded. • 1 = MPI
LG 42LD320H | Setup Guide - Page 21
features of the TV. Press MENU on the Installer Remote to access the TV setup menus, and set the TV features to the desired configuration for the end user. CHANNEL PICTURE AUDIO TIME LOCK OPTION INPUT MY MEDIA Refer to the Owner's Manual for further information on the TV setup menus. 206
LG 42LD320H | Setup Guide - Page 22
inputs. (Icon) XYZ XYZ XYZ 1234 567 NETWORK (Label) Editing and adding the labels can only be done if there are channels entered into the TV's Channel Map either during Commercial Mode Setup (see pages 12 to 13), by cloning, or by using some PPV provider's master remote controls. Note: A blank
LG 42LD320H | Setup Guide - Page 23
TVs. Since these models are equipped with the EBL module, they can also be broadcast configured in FTG Mode by a Free-To-Guest Management Appliance (FMA) head end device. Refer to the Free-To-Guest (FTG) Configuration Application manual and/or the Installation & Setup manual Write" them back to the
LG 42LD320H | Setup Guide - Page 24
Map Conﬁguration Utility Overview To determine the operating mode of the TV, press MENU on the Installer Remote. If the end user Function Menu (showing aspect ratio options-see below) appears, the TV/EBL is in FTG Mode. If the TV setup menus appear, the EBL is in Passthrough Mode. The following
LG 42LD320H | Setup Guide - Page 25
FTG Mode of Operation (Cont.) FTG Channel Map Conﬁguration Utility / FTG Channel Map Editor Overview The FTG Channel Map Editor shows a single Logical Channel's Data and the FTG Channel Map. LOGICAL CHANNEL MAPPING Select a Logical Channel number, then assign it the RF, Major, and Minor channel
LG 42LD320H | Setup Guide - Page 26
FTG Installer Menu items shown in the FTG Configuration Application to defaults. IR REMOTE ACCESS Toggle IR Remote Access to ON to obtain access to TV setup menus and Installer Menu. WRITE Click to transfer the FTG Installer Menu settings to the EBL. 26 LEARN Click to transfer Installer Menu
LG 42LD320H | Setup Guide - Page 27
pay attention to ensure the TV screen shows the proper message when cloning. If the message indicated does not appear, there is a problem with that step, and Caption Options Lock Movie Rating TV Rating - Children TV Rating - General Input Block Time Auto Clock Manual Clock Off Time On Time Auto
LG 42LD320H | Setup Guide - Page 28
will not be recognized. • It is not possible to clone a Master TV's clock using a USB memory device. Either set a Target TV's clock manually, or use the Auto Clock setting in the TV setup menus. Learn Setup from Master TV 1. Ensure the Master TV is set up completely and the EBL is in Pass-through
LG 42LD320H | Setup Guide - Page 29
as AV-1, from the Input Menu. Then, plug one end of the MPI cable into the TV MPI port. 3. Turn ON the TLL-1100A. 4. Use the MODE button on the TLL- the TLL-1100A to select the Memory CBank (1 to 8) in which to store the Master TV Setup. 6. Plug the other end of the MPI cable into the MPI port on the
LG 42LD320H | Setup Guide - Page 30
's internal clock-accurate to within one minute. Since the TLL-1100A's time cannot be set directly, the current time needs to be copied from an LG TV equipped with an enabled MPI port. After the time is copied to the TLL-1100A clone programmer, the current time will be maintained and can
LG 42LD320H | Setup Guide - Page 31
problems between the TV and the LT2002 clone programmer. If this is the case, check for a damaged cable, poor contacts, or other connection troubles. TV Setup. (Continued on next page) MPI Cable Ferrite Core (TDK, ZCAT 2035-0930) $POOFDUDBCMFUP 57.1*+BDLBOE GPMMPXPOTDSFFO instructions
LG 42LD320H | Setup Guide - Page 32
to keep the time as accurately as possible.) Since the LT2002's time cannot be set directly, the current time needs to be copied from an LG TV equipped with an enabled MPI port. After the time is copied to the LT2002 clone programmer, the current time will be maintained and can then
LG 42LD320H | Setup Guide - Page 33
1 .......... RJP RGB IN (PC) SPEAKER OUT (8 ) REMOTE CONTROL OUT AUDIO IN (RGB/DVI) RS-232C IN (SERVICE ONLY) ......... AV IN 1 VIDEO L/MONO-AUDIO-R ANTENNA IN GAME CONTROL TV-LINK CFG Y PB PR VIDEO L R AUDIO COMPONENT IN (26LD320H only) (26LD320H only: GAME CONTROL/MPI) HDMI/DVI
LG 42LD320H | Setup Guide - Page 34
See screen samples at right.) Select TV Software Update from the first TV Software Update window. In the second TV Software Update window, select/highlight the update file to install and press ENTER. Note: Do not select Forced Update options unless you have been specifically instructed to do so or have
LG 42LD320H | Setup Guide - Page 35
Upon the restart, you should see the new splash screen. USB Download Menu Upgrade TV Software Upgrade PTC Software Teach To TV Previous Enter TV Software Update (Expert) TV Software Update LOGO Image Download TV Software Update (Expert) The following software files are found in the memory card
LG 42LD320H | Setup Guide - Page 36
37.89% 43.63% 47.60% 50.81% 55.63% 59.98% 63.86% Item 099 Back Lighting (Dynamic) 200 190 180 170 160 150 140 130 120 110 101 26LD320H Power Consumption (Watts) 10.65% 16.72% 22.98% 29.10% 35.32% 42.69% 49.80% 57.30% 64.01% 70.24% 42LD320H Power Consumption (Watts) 125.41 111.41 103.30 95.29 87
LG 42LD320H | Setup Guide - Page 37
to the Side (AV IN 2) Video Aux source whenever a plug is inserted into the AV IN 2 Video input. When the plug is removed, the TV will switch back to the previous channel or input source that was being displayed before the plug was inserted. However, if any direct access to an RF
LG 42LD320H | Setup Guide - Page 38
Input Configuration DIRECT ACCESS Tuning TV OLD_ OCV = 0 130 OLD_ OCV = 1 90 131 91 132 92 Source Input Video2 (Side) Video1 (Rear) HDMI2 133 93 HDMI1/DVI Source Mode CV CV
LG 42LD320H | Setup Guide - Page 39
, with the TV for configuration and control. Note: MPI cards with b-LAN technology-LMT7Z5, LMT7Z7, LMT7Z9-are NOT supported on TVs in which the The control device at the head end, for example, an LG FMA-LG101, can control multiple TVs. When the TV is first installed, it must be turned ON in order
LG 42LD320H | Setup Guide - Page 40
Reference: RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models RJP-101M RJP-101ML RJP-110F RJP-110FW RJP-110W RJP-110WBR RJP-110S RJP-120G RJP-120T RJP-201B RJP-202B Scaler Models N/A N/A RJP-210F RJP-210FW RJP-210W RJP-210WBR RJP-210S RJP-220G RJP-220T RJP-301B RJP-302B
LG 42LD320H | Setup Guide - Page 41
. Contact your LG dealer. Picture Reception Normal picture, poor or no sound. Audio muted. Broadcast problem. Press MUTE or use Volume Up key to increase sound level. Try a different channel. Note: For other problems not caused by the TV, refer to the other devices' operating guide(s). 206-4163
LG 42LD320H | Setup Guide - Page 42
Troubleshooting (Cont.) Troubleshooting Flow Chart Controller Quick Check STATUS LED on PTC No Board blinking? Yes TV connected to AC Power? Yes Bad TV No Plug into AC Power outlet. Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV.
LG 42LD320H | Setup Guide - Page 43
responding or continued to respond? Stopped responding TV is in Commercial Mode. Continued to respond TV is not in Commercial Mode. Call Technical Support for assistance. FTG Operation Troubleshooting The following table provides troubleshooting information for when the EBL is configured in
LG 42LD320H | Setup Guide - Page 44
they cannot display entire screens as shown in the setup instructions accompanying the clone programmer. Use the printed menu illustrations in the documentation as an aid to making your programming choices. • For both Master and Target TVs-The TV EBL must be in Pass-through Mode for cloning purposes
LG 42LD320H | Setup Guide - Page 45
the words found in this guide. 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER
LG 42LD320H | Setup Guide - Page 46
is available online at: www.LGsolutions.com/products. From the Products page, select TVs, Systems & Solutions, then LCD TVs, then the applicable TV. Click the Literature & Downloads tab at the bottom of the TV page, and select the required document(s) from the Downloads list. Notes 46 206
LG 42LD320H | Setup Guide - Page 47
For Customer Support/Service, please call: 1-888-865-3026 www.LGsolutions.com Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric is a trademark of LG Electronics U.S.A., Inc. b-LAN is a trademark of LodgeNet Interactive Corporation. All other trademarks or registered