LG 42LK550 Owner's Manual - Page 51

ENTERTAINMENT 51 WPS (Wi-Fi Protected Setup) If your router or AP has a WPS button, it is the easiest connection method. You simply press the button on the router and then select the WPS on the TV within 120 seconds. 1 Repeat step 1-7 on "Connecting to a wireless network". 2 Press the Navigation buttons to select the Simple setting (WPS-button mode). 3 Press the WPS button on your router. 4 Go back to the TV and select Connect. 5 Repeat step 6-7 on "Connecting to a wired network". Ad-hoc Mode Ad-hoc mode allows the TV to use a wireless to connect to a computer without using a router or access point. 1 Repeat step 1-5 on "Connecting to a wireless network". 2 Press the Navigation buttons to select Setting Ad-hoc network and press ENTER. 3 Press the Navigation buttons to select Enter and press ENTER. 4 Press ENTER to select Connect to connect Ad- hoc network. - You can see the Network ID and Security Key on your TV screen. - Enter this Network ID and Security Key to your device. - When needed, you can change the setting information using the Red button. 5 Press the Navigation buttons to type in an IP address and press ENTER. Option PC Setting TV Setting Description yyInternet Protocol(TCP/IP) of PC needs to be set manually. IP address, Subnet Mask, and default Gateway can be set with your own discretion. »»e.g.) IP address: 192.168.0.1 / Subnet Mask: 255.255.255.0 / default Gateway: 192.168.0.10 yyVerify IP address and gateway of PC. Input Gateway address of PC to IP Address, and IP Address of PC to Gateway, and select Enter. »»e.g.) IP address: 192.168.0.10 / Subnet Mask: 255.255.255.0 / default Gateway: 192.168.0.1 6 Press the Navigation buttons to select Close after Network setting is completed. 7 Press the ENTER. NOTE When searching for wireless networks on your PC using ad-hoc, the TV is named LGTV10. yyLGTV10 that appears in the list. (Select the same name as the network ID that appears on your TV screen.) ENEGNLGISH