LG 55XS2E Owners Manual

LG 55XS2E Manual

Get LG 55XS2E PDF manuals and user guides View all LG 55XS2E manuals
Add to My Manuals
Save this manual to your list of manuals

LG 55XS2E manual content summary:

  • LG 55XS2E | Owners Manual - Page 1
    OWNER'S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 49XS2E 55XS2E *SAC37733402* (2007-REV02) www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
  • LG 55XS2E | Owners Manual - Page 2
    11 --Attaching and removing the LG Logo Bracket 11 --Installing on a Wall 13 REMOTE CONTROL 16 MAKING CONNECTIONS 18 --Connecting to a PC 18 --External Device Connection 18 --Connecting Multiple Monitors 20 --Using the Input List 21 TROUBLESHOOTING 22 PRODUCT SPECIFICATIONS....... 25
  • LG 55XS2E | Owners Manual - Page 3
    ENGLISH 3 WARNING: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. IMPORTANT PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING Failure to follow those warnings may result in
  • LG 55XS2E | Owners Manual - Page 4
    ENGLISH 4 •• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off before plugging in the cord. -- You may be electrocuted due to excess moisture. •• If you don't intend to use the product for a long
  • LG 55XS2E | Owners Manual - Page 5
    unplug the power cord and contact LG Customer Service. -- If you continue to Service. •• Do not drop an object on or apply impact to the product. Do not throw any toys or objects at the product. -- It can cause injury to humans, problems surface that is large enough to support the product. -- If the
  • LG 55XS2E | Owners Manual - Page 6
    ENGLISH 6 Precautions for Moving the Product WARNING •• Make sure to turn off the product. -- You may be electrocuted or the product can be damaged. •• Make sure to remove all cables before moving the product. -- You may be electrocuted or the product can be damaged. •• When lifting or moving the
  • LG 55XS2E | Owners Manual - Page 7
    or electric shock can occur. -- Contact LG Customer Service for repair. •• When cleaning the Set the appropriate resolution by referring to the User's Guide. •• Keep small accessories out of the reach of or stain on the monitor screen. To avoid this problem, use a screen saver and power off when
  • LG 55XS2E | Owners Manual - Page 8
    ENGLISH 8 LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI . DTS, the Symbol, & DTS and the Symbol together, DTS 2.0 Channel, DTS 2.0+Digital Out, DTS-HD, and DTS Virtual:X are registered trademarks or trademarks of DTS, Inc.
  • LG 55XS2E | Owners Manual - Page 9
    may be changed without prior notice due to upgrade of product functions. •• SuperSign Software & Manual -- Downloading from the LG Electronics website. -- Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model. •• The warranty will not cover any
  • LG 55XS2E | Owners Manual - Page 10
    ENGLISH 10 Parts and Buttons The image may be different according to the model. Screen Buttons Adjusts up and down. Moves left and right. Displays the current signal and mode. Accesses the main menus, or saves your input and exits the menus. Change the input signal. Turns the power on or off. NOTE
  • LG 55XS2E | Owners Manual - Page 11
    11 Portrait Layout When installing in a portrait layout, rotate the monitor clockwise 90 degrees (when facing the screen). Attaching and removing the LG Logo Bracket Removing the LG Logo Bracket 1 Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Using
  • LG 55XS2E | Owners Manual - Page 12
    the floor, and then put the monitor on it with the screen face down. Using a screwdriver, remove the screw that secures the LG Logo Bracket to the bottom rear of the monitor. 2 After removing the screw, remove the LG Logo Bracket. Align with the hole on the left side to attach the
  • LG 55XS2E | Owners Manual - Page 13
    Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. ENGLISH 100 standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents related to the use of non
  • LG 55XS2E | Owners Manual - Page 14
    slanted wall, it may fall and result in injury. Use an authorized LG wall mount and contact your local dealer or qualified personnel to assist with to use the correct length. •• For more information, please refer to the guide provided with the wall mount. Securing the monitor to a wall (optional) 1
  • LG 55XS2E | Owners Manual - Page 15
    that children do not climb on or hang from the monitor. NOTE •• Use a platform or cabinet that is large and strong enough to support the monitor securely. •• Brackets, bolts, and cords are sold separately. You can obtain additional accessories from your local retail store. •• The illustration shows
  • LG 55XS2E | Owners Manual - Page 16
    on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open control sensor on the monitor. •• Some features of the remote control may not be supported in certain models. (POWER) Turns the monitor on or off. Turns the monitor on
  • LG 55XS2E | Owners Manual - Page 17
    ENGLISH 17 Selects the Picture Mode. (HOME) Activates the Launcher. Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. SuperSign menu key. Navigation Buttons Scrolls through menus or options. Selects menus or options and confirms your input. (BACK)
  • LG 55XS2E | Owners Manual - Page 18
    device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the Plug and Play* feature. * Plug and Play: a feature that enables a PC to recognize
  • LG 55XS2E | Owners Manual - Page 19
    Speed HDMI®/TM Cable with Ethernet •• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to manually change the default audio output to HDMI. •• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode. •• You
  • LG 55XS2E | Owners Manual - Page 20
    20 Connecting Multiple Monitors To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product. ENGLISH MONITOR 1 MONITOR 2 MONITOR 3 MONITOR 4
  • LG 55XS2E | Owners Manual - Page 21
    21 Using the Input List (HOME) •• HDMI1 HDMI2 DISPLAYPORT DVI-D ENGLISH
  • LG 55XS2E | Owners Manual - Page 22
    22 TROUBLESHOOTING ENGLISH No image is displayed. Problem Is the product power cord connected? Does the "Invalid Check if the Plug and Play function is supported by referring to the graphics card user manual. The screen image looks abnormal. Problem Is the screen position wrong? The screen is
  • LG 55XS2E | Owners Manual - Page 23
    normal for LCD screen products. The audio function does not work. No sound? Problem Sound is too dull. Sound is too low. Action •• See if the equalizer sound. •• Adjust the volume. Screen color is abnormal. Problem Screen has poor color resolution (16 colors). Screen color is unstable
  • LG 55XS2E | Owners Manual - Page 24
    changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once
  • LG 55XS2E | Owners Manual - Page 25
    ports Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen 1920 x 1080 @ 60 Hz -- This may not be supported on some OS or graphics card types. 1920 x 1080 @ 60 Hz -- This may not be supported on some OS or graphics card types. HDMI / DVI-D / DISPLAYPORT: 30 kHz to 83 kHz HDMI / DVI
  • LG 55XS2E | Owners Manual - Page 26
    consumption Environmental Conditions Operating Temperature Operating Humidity Storage Temperature Storage Humidity Installation site Dimensions (Width x Height x Depth) / Weight 55XS2E 0.630 mm (H) X 0.630 mm (V) AC 100-240 V ~ 50/60 Hz 2.6 A On Mode: 240 W (Typ.) Sleep Mode (DVI-D, HDMI
  • LG 55XS2E | Owners Manual - Page 27
    27 ENGLISH HDMI / DVI-D / DISPLAYPORT (PC) Support Mode Resolution 800 x 600 1024 x 768 1280 x 720 1366 x 768 1280 x 1024 1680 x 1050 1920 x 1080 Horizontal frequency (kHz) 37.879 48.363 44.772
  • LG 55XS2E | Owners Manual - Page 28
    serial numbers of the SET are located on the back and one side of the SET. Record it below should you ever need service. Supplier's Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail
  • LG 55XS2E | Owners Manual - Page 29
    USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. webOS 3.0 www.lg.com
  • LG 55XS2E | Owners Manual - Page 30
    Video 18 Supported Photo & Video Files Viewing Photos and Videos Scheduled Playing Export Delete --Music 22 Supported Music Files referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for
  • LG 55XS2E | Owners Manual - Page 31
    Some features described in the User Guide may not be supported in certain models. •• SNMP 2.0 is supported. ENGLISH_index USER SETTINGS Main Menu ]: Allows an expert, or anyone interested in high quality pictures, to manually tune the picture for the best picture quality. NOTE •• Depending on
  • LG 55XS2E | Owners Manual - Page 32
    4 ENGLISH_index To fine-tune the picture mode / [Picture] [Picture Mode Settings] [Customize] •• [Backlight]/[OLED Light]: Adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to 100, the brighter the screen is. •• [Contrast]: Ajusts the difference
  • LG 55XS2E | Owners Manual - Page 33
    -- [MPEG Noise Reduction]: Reduces the noise produced while creating digital video signals. -- [Black Level]: Adjusts the black level of options may differ. To set the aspect ratio (Some features may not be supported in certain models.) / [Picture] [Aspect Ratio] Changes the aspect ratio to
  • LG 55XS2E | Owners Manual - Page 34
    •• To revert to the default settings, either go to [General] Setup] [Factory Reset]. [Reset to Initial Settings] or [Installation Menu] [Signage Configuring the OLED Display (For OLED models only) / [Picture] [OLED Panel Settings] •• [Clear Panel Noise]: Corrects issues that may arise when
  • LG 55XS2E | Owners Manual - Page 35
    for listening to music. •• [Game]: Optimizes sound for playing videogames. To use the Sound Effects function / [Sound] [Sound Mode Settings] •• [Equalizer]: Manually adjust sound by using the equalizer. •• [Balance]: Adjust the output volume for the left speaker and the right speaker. •• [Reset
  • LG 55XS2E | Owners Manual - Page 36
    Signage monitor when it is turned on. •• It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG •• [Signage Speaker]: Adjusts the sync between video and audio coming from external speakers, such as those connected to the digital audio output port, LG audio
  • LG 55XS2E | Owners Manual - Page 37
    Network Settings To Set a Signage Monitor Name / [Network] [Signage Name] You can set a name for Signage Monitor that will be used page of the PIN-supporting wireless router to connect to the router in a simple manner. •• [Wi-Fi advanced settings]: Manually input the network information
  • LG 55XS2E | Owners Manual - Page 38
    of service. For details, contact your ISP. •• LG is not responsible for any malfunction of the display and/or the Internet connection feature due to communication errors/malfunctions associated with your Internet connection, or other connected equipment. •• LG is not responsible for problems with
  • LG 55XS2E | Owners Manual - Page 39
    point device that supports wireless connection is required and the wireless connection feature must be enabled on the device. Contact your service provider regarding availability correctly according to the appropriate manual and set the network. •• Connection method may differ according to the AP
  • LG 55XS2E | Owners Manual - Page 40
    / [General] [Menu Language] Select one of the languages on the menu displayed on the screen. •• [Menu Language]: Sets a language for Signage. Setting up the keyboard language / [General] [Keyboard Languages] Select the language you wish to show on the keyboard. •• [Keyboard Languages]: Sets
  • LG 55XS2E | Owners Manual - Page 41
    13 ENGLISH_index Configuring Set ID / [General] [Set ID] •• [Set ID](1 to 1000): Assigns a unique Set ID number to each product when several products are connected for display. Assign numbers ranging from 1 to 1000 and exit the option. You can control each product separately by using the Set ID
  • LG 55XS2E | Owners Manual - Page 42
    before connecting. •• HDMI input ports 1 and 2 are best suited for specifications for high definition 4K @ 60 Hz (4:4:4, 4:2:2) video. However, video or audio may not be supported depending on the specifications of the external devices. If this is the case, please connect to a different HDMI port.
  • LG 55XS2E | Owners Manual - Page 43
    ENGLISH_index 15 ENTERTAINMENT Using Multimedia Features Connecting USB/SD Storage Devices Connect a USB storage device such as a USB flash memory, SD storage devices or an external hard drive to the display and use multimedia features. CAUTION •• Do not turn the monitor off or remove the USB
  • LG 55XS2E | Owners Manual - Page 44
    not be recognized. •• Please connect the USB storage device using the cable provided by the device manufacturer. •• Some USB storage devices may not be supported or operate smoothly. •• File alignment method of USB storage devices is similar to that of Window XP and filenames can recognize up to 100
  • LG 55XS2E | Owners Manual - Page 45
    drive with an "Energy Saving" function does not work, try turning the hard drive off and on again. •• USB storage devices below USB 2.0 are also supported but may not function correctly in the Videos. •• A maximum of 999 sub-folders or files can be recognized under one folder. •• The SDHC type for
  • LG 55XS2E | Owners Manual - Page 46
    ) NOTE •• Subtitles are not supported in certain models. •• Embedded subtitles are not supported. Supported Video Codecs Extension .asf, .wmv I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS H.264/AVC, MPEG-4, HEVC Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3) H.
  • LG 55XS2E | Owners Manual - Page 47
    H.264 1920 x 1080@60P 4096 x 2160@30P BP/MP/[email protected] 50 Mbps HEVC 4096 x 2160@60P [email protected], Main10 [email protected] 50 Mbps Supported Photo File File Format Format .jpeg, .jpg, .jpe JPEG .png PNG .bmp BMP Item •• Minimum: 64 x 64 •• Maximum -- Normal Type: 15360 (W) x 8640 (H) -- Progressive Type
  • LG 55XS2E | Owners Manual - Page 48
    HEVC-encoded Ultra HD videos other than the content officially provided by LG Electronics may not be played. Some codecs can be used after upgrading Digital, Dolby Digital Plus, AAC, HE-AAC •• Playable file sizes may vary depending on the encoding condition. •• The AAC Main profile is not supported
  • LG 55XS2E | Owners Manual - Page 49
    ENGLISH_index 21 Scheduled Playing •• Only applies to certain models. You can schedule your selected content to play at a certain time. (Scheduled playing is available with external inputs.) / 1 Select your desired storage device. 2 Enter the folder that contains the file you wish to schedule. 3
  • LG 55XS2E | Owners Manual - Page 50
    output cannot play the music. File Format .mp3 .wav .ogg .wma Item Bit rate Sample freq. Support Channels Bit rate Sample freq. Support Channels Bit rate Sample freq. Support Channels Bit rate Sample freq. Support Channels 32 Kbps to 320 Kbps 16 KHz to 48 KHz MPEG1, MPEG2 Mono, Stereo 8 kHz to
  • LG 55XS2E | Owners Manual - Page 51
    or single flash files. Content produced via SuperSign Editor is not played either. Information To check the basic information of Signage Monitor / You can see the basic information on Signage Monitor. You can also switch to Smart Energy Saving Mode or configure Fail Over settings. (You can switch to
  • LG 55XS2E | Owners Manual - Page 52
    24 ENGLISH_index Local Contents Scheduler •• Only applies to certain models. •• The recommended resolution for scheduled photo playback is 4096 x 2160 or below. Setting a Scheduled Playing You can create a scheduled playing using the Local Contents Scheduler and the Photo & Video app. Scheduled
  • LG 55XS2E | Owners Manual - Page 53
    to the instructions provided by the guide that can be accessed through the Connection Guide button in the LG Signages supporting WiDi are detected. In the list of detected displays, select a Signage to connect to and then, click Connect. Enter the 8-digit PIN number (a) displayed on the Signage
  • LG 55XS2E | Owners Manual - Page 54
    your USB drive or SD card. If you use more than 1,000 images, the images may not be displayed smoothly depending on your environment. •• Supported devices (Some features may not be available depending on the type or version of your device or browser.) -- Android 4.4 or later (Chromium v.38.0) -- iOS
  • LG 55XS2E | Owners Manual - Page 55
    1920 x 1080 (Full HD) resolution to view the same screen as the monitor. •• To delete a distributed schedule, disable the schedule and redistribute. Supported Photo Files File Format Format .jpeg, .jpg JPEG .png PNG Item •• Minimum: 64 x 64 •• Maximum: 1920 (W) x 1080 (H) •• Minimum: 64 x 64
  • LG 55XS2E | Owners Manual - Page 56
    ENGLISH_index 28 Leveler Tool •• Only applies to certain models. You can check whether the product is horizontally and vertically level when installing the product outdoors in an enclosure. Accessing the Leveler Tool / You can check whether the product is horizontally and vertically level. Exiting
  • LG 55XS2E | Owners Manual - Page 57
    . CAUTION •• Supported resolutions (this program is optimized for the following resolutions): -- 1280 x 1024 / 375 x 667 •• Supported browsers (this Sets Picture Mode, Energy Saving, OSD Portrait, etc. •• Network: Sets Signage Name, IP Address, etc. •• Time: Enables or disables Set Automatically and
  • LG 55XS2E | Owners Manual - Page 58
    upper left to expand the menu. 5 Click the face-shaped image to access the User Menu (Change Password, Logout). CAUTION •• For apps that do not support security protocols, access the Control Manager by entering the address displayed on the app's screen in your browser.
  • LG 55XS2E | Owners Manual - Page 59
    ENGLISH_index 31 Follow the steps below if you encounter issues with your security certificate while attempting to access. On Chrome 1 Click 'ADVANCED' 2 Click 'Proceed to product IP address (unsafe)'
  • LG 55XS2E | Owners Manual - Page 60
    ENGLISH_index 32 On FireFox 1 Click 'Advanced' 2 Click Add 'Exception...'
  • LG 55XS2E | Owners Manual - Page 61
    ENGLISH_index 33 3 Click 'Confirm Security Exception' On Internet Explorer 1 Click 'Continue to this website (not recommended)'. * The text of the links and buttons may differ depending on the OS (Operating System) or language settings used.
  • LG 55XS2E | Owners Manual - Page 62
    ENGLISH_index 34 Multi-Screen •• Only applies to certain models. This feature allows you to view multiple external inputs and videos on a single screen. Accessing Multi-Screen Enter [Multi-screen] to select the screen layout. NOTE •• When entering [Multi-screen], the screen may flicker and the
  • LG 55XS2E | Owners Manual - Page 63
    ENGLISH_index PICTURE ID Settings •• Only applies to certain models. [PICTURE ID] is used to change the settings of a specific set (display) using a single IR receiver for multi- vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables.
  • LG 55XS2E | Owners Manual - Page 64
    ENGLISH_index 36 IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported depending on the model. Code (Hex) 08 C4 C5 95 0B 10 11 12 13 14 15 16 17 18 19 02 03 E0 E1
  • LG 55XS2E | Owners Manual - Page 65
    Code (Hex) 43 99 40 41 06 07 44 28 7B 5B 72 71 63 61 B1 B0 BA 8F 8E 5F 3F 7C 97 96 Function (SETTINGS (Menu)) Auto Config. (Up) (Down) (Right) (Left) (OK) (BACK) TILE EXIT PICTURE ID ON (RED) PICTURE ID OFF (GREEN) YELLOW BLUE W.BAL (S.MENU) (HOME) SWAP MIRROR 37 Remarks Remote control button
  • LG 55XS2E | Owners Manual - Page 66
    ENGLISH_index 38 TO CONTROL MULTIPLE PRODUCTS •• Only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being
  • LG 55XS2E | Owners Manual - Page 67
    ENGLISH_index Communication Parameter Baud Rate: 9600 bps Data Length: 8 bit Parity Bit: None Stop Bit: 1 bit Flow Control: None Communication Code: ASCII code 39 NOTE •• When using three-wire connections (non-standard), an IR daisy chain cannot be used. •• Be sure to only use the provided
  • LG 55XS2E | Owners Manual - Page 68
    ENGLISH_index 40 Command Reference List 01 [Power] 02 [Select input] 03 [Aspect Ratio] 04 [Energy Saving] 05 [Picture Mode] 06 [Contrast] 07 [Brightness] 08 [Sharpness] 09 [Color] 10 [Tint] 11 [Color temperature] 12 [Balance] 13 [Sound Mode] 14 [Mute] 15 [Volume Control] 16 [Time 1 (year/month/day
  • LG 55XS2E | Owners Manual - Page 69
    26 [Reset] 27 [Current Temperature] 28 [Key] 29 [Time Elapsed] 30 [Product Serial Number] 31 [Software Version] 32 [White Balance Red Gain] 33 [White Balance Green Gain] 34 [White Balance Blue Gain] 35 [White Balance Red Offset] 36 [White Balance Green Offset] 37 [White Balance Blue Offset] 38 [
  • LG 55XS2E | Owners Manual - Page 70
    ENGLISH_index 42 51 [Check the status] 52 [Check Screen] 53 [Speakers] 54 [Daylight Saving Time] 55 [PM Mode] 56 [ISM Method] 57 [Network Settings] 58 [Auto-adjustment] 59 [H Position] 60 [V Position] 61 [H Size] 62 [Power On Status] 63 [Wake On LAN] 64 [Intelligent Auto] 65 [OSD Portrait Mode] 66
  • LG 55XS2E | Owners Manual - Page 71
    101 [Model Name check] 102 [No Signal Image] 103 Wi-Fi 104 Analog Signage BLU Setting Analog Signage BLU On/Off 105 Time Setting 106 BLU Manual On/Off 107 Silent fan mode COMMAND 1 2 s n, 89 s m s FF 00 to 01 00 to 01 00 to 01 See Analog Signage BLU On/Off Time Setting 00 to 01 00 to 01 *
  • LG 55XS2E | Owners Manual - Page 72
    ' is sent in control mode via RS-232C, the current setting value of a function can be checked (only for some functions). * Some commands are not supported depending on the model.
  • LG 55XS2E | Owners Manual - Page 73
    (b)( )(Set ID)( )(OK/NG)(Data)(x) * Some input signals may not be supported depending on the model. * Returns to NG if the webOS Player is not distributed For more information, see the aspect ratio section of the owner's manual. * The aspect ratio may differ depending on the model's input
  • LG 55XS2E | Owners Manual - Page 74
    10: Touch 11: Calibration Acknowledgement (x)( )(Set ID)( )(OK/NG)(Data)(x) * Depending on the model, some picture modes may not be supported. 08. [Sharpness] (Command: k k) Adjusts the screen sharpness. Transmission (k)(k)( )(Set ID)( )(Data)(Cr) Data 00~32: Sharpness 0 to 50 Acknowledgement
  • LG 55XS2E | Owners Manual - Page 75
    to 100 Acknowledgement (f)( )(Set ID)( )(OK/NG)(Data)(x) * It may not be supported depending on the model. 16. [Time] 1 (year/month/day) (Command: Time 1 (year/month/day) settings. 2. Setting the Auto time Data1 00: Auto 01: Manual * To view the set value of the Auto time, enter "fa [Set ID] 00 ff
  • LG 55XS2E | Owners Manual - Page 76
    48 ENGLISH_index 17. [Time] 2 (hour/minute/second) (Command: f x) Adjusts the Time 2 (hour/minute/second) value. Transmission (f)(x)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) Data1 00~17: 0 0 to 23 hours Data2 00~3B: 0 0 to 59 minutes Data3 00~3B: 0 0 to 59 seconds * Enter "fx [Set ID] ff"
  • LG 55XS2E | Owners Manual - Page 77
    one row and save the 1st schedule input in HDMI mode. Example 2: fu 01 f1 ff - Read the 1st schedule input. * This function is only supported when 1 (year/month/date), 2 (hour/ minute/second) and On Time (repeat mode/time) are set. * This feature operates as the last input. * Input is possible
  • LG 55XS2E | Owners Manual - Page 78
    Set ID)( )(Data)(Cr) Data 00: Picture Reset 01: Screen reset 02: Initial Settings Acknowledgement (k)( )(Set ID)( )(OK/NG)(Data)(x) * It may not be supported depending on the model. 24. [Auto Power Off] (4 Hours) (Command: m n) Sets the monitor to enter Auto Power Off after 4 hours. Transmission
  • LG 55XS2E | Owners Manual - Page 79
    ENGLISH_index 29. [Time Elapsed] (Command: d l) Checks the elapsed time. Transmission (d)(l)( )(Set ID)( )(Data)(Cr) Data FF: Read status Acknowledgement (l)( )(Set ID)( )(OK/NG)(Data)(x) * The data received is shown as a hexadecimal value. 51 33. [White Balance Green Gain] (Command: j n) Adjusts
  • LG 55XS2E | Owners Manual - Page 80
    off Acknowledgement (d)( )(Set ID)( )(OK/NG)(Data)(x) * This may not be supported on some models. * Dual-screen models must use the screen off commands in Data2 00~0F: Tile column Data3 00~0F: Tile row * It may not be supported depending on the model. 42. [Tile ID] (Command: d i) Sets the tile ID
  • LG 55XS2E | Owners Manual - Page 81
    : On Acknowledgement (j)( )(Set ID)( )(OK/NG)(Data)(x) * It may not be supported depending on the model. 53 46. [Power On Delay] (Command: f h) Sets (m)(i)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: Auto 02: Manual Acknowledgement (i)( )(Set ID)( )(OK/NG)(Data)(x) 45. [Remote Control] / [Local
  • LG 55XS2E | Owners Manual - Page 82
    DISPLAYPORT Data N: E0: INTERNAL Memory E1: USB E2: S D CARD Acknowledgement (j)( )(SetID)( )(OK/NG)(Data1)(Data2)(Data3)(Data4) ...(DataN)(x) * Some input signals may not be supported on some models. * The data number (N) may vary depending on the model. (The data number depends on the number of
  • LG 55XS2E | Owners Manual - Page 83
    OK * Sets to NG when Check Screen is set to Off or not supported. Data Data1 Data2 13(For checking Door State) Number of the door to 2: sd 01 02 ff ff ff ff - To check the End Time) * This function is supported only when 1 (Year/Month/ Day) and 2 (Hour/ Minute/Second) are set. Acknowledgement (d)(
  • LG 55XS2E | Owners Manual - Page 84
    01 82 80 (applies the saved IP mode (auto/manual), subnet mask, and gateway) sn 01 82 81 (applies the saved DSN) * Each IP address contains 12 decimal digits. Acknowledgement (n)( )(Set ID)( )(OK/NG)(Data1)(Data)(x) * It may not be supported depending on the model. * This feature is available only
  • LG 55XS2E | Owners Manual - Page 85
    Set ID)( )(Data)(Cr) Data 00-64: Min -50 (Small) to Max 50 (Large) Acknowledgement (s)( )(Set ID)( )(OK/NG)(Data)(x) * It may not be supported depending on the model. 59. [H Position] (Command: f q) Adjusts the horizontal position of the screen. This feature only works when the Tile Mode is set to
  • LG 55XS2E | Owners Manual - Page 86
    )(Set ID)( )(Data)(Cr) Data 00: D isables the settings 01: E nables the settings Acknowledgement (n)( )(Set ID)( )(OK/NG)(Data)(x) * It may not be supported depending on the model. 69. [Pivot Mode] (Command: t a) Sets Pivot Mode to on/off. Transmission (t)(a)( )(Set ID)( )(Data)(Cr) Data 00: Off
  • LG 55XS2E | Owners Manual - Page 87
    )(Cr) Data 00: Off 01: 9 0 degrees 02: 2 70 degrees 03: 1 80 degrees Acknowledgement (n)( )(Set ID)( )(OK/NG)(8)(5)(Data)(x) * This feature may not be supported in certain models. 59 73. [DPM Wake up Control] (Command: s n, 0b) Sets the DPM Wake up Control Mode. Transmission (s)(n)( )(Set ID
  • LG 55XS2E | Owners Manual - Page 88
    off 01: E asy Brightness Control on * This feature does not work if the current time is not set. * This may not be supported on some models. Acknowledgement (m)( )(Set ID)( )(OK/NG)(Data)(x) 78. [Easy Brightness Control Schedule] (Command: s s) Sets Easy Brightness Control schedules. Transmission
  • LG 55XS2E | Owners Manual - Page 89
    . * This function may not work properly if there is no signal. Acknowledgement (e)( )(Set ID)( )(OK/NG)(Data1)(Data2)(x) * This feature may not be supported in certain models. 82. [Screen Off Always] (Command: s n, 0d) Screen Off Always has the same effect as entering the Screen Off menu regardless
  • LG 55XS2E | Owners Manual - Page 90
    )(Set ID)( )(9)(1)( )(Data)(Cr) Data 00: Off 01: On Acknowledgement (n)( )(Set ID)( )(OK/NG)(9)(1)(Data)(x) * This feature may not be supported in certain models. 86. [Holiday Schedule Mode] (Command: s n, 1a) Turns Holiday Schedule mode on or off. Transmission (s)(n)( )(Set ID)( )(1)(a)( )(Data
  • LG 55XS2E | Owners Manual - Page 91
    o) Sets the fan mode. Transmission (d)(o)( )(Set ID)( )(Data)(Cr) Data 00: Auto 01: On 02: Manual 03: Off Acknowledgement (o)( )(Set ID)( )(OK/NG)(Data)(x) * This may not be supported on some models. 90. [Fan Failure Check] (Command: d w) Checks for fan failures. Transmission (d)(w)( )(Set ID
  • LG 55XS2E | Owners Manual - Page 92
    ID)( )(Data)(Cr) Data 00: N o (Off) 01: Y es (On) Acknowledgement (l)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be supported for certain models. 96. [Hybrid Mode] (Command: s n, 96) Sets display's transparency mode. Transmission (s)(n)( )(Set ID)( )(9)(6)( )(Data)(Cr) Data 00: Hybrid
  • LG 55XS2E | Owners Manual - Page 93
    01: Disable Acknowledgement (n)( )(Set ID)( )(OK/NG)(9)(f)(Data)(x) * This feature may not be supported on some models. 104. Analog Signage BLU Setting (Command: s n, c2) Set up Analog Signage BLU. Transmission (s)(n)( )(Set ID)( )(c)(2)( )(Data)(Cr) Data 00: Off 01: On Acknowledgement (n)( )(Set
  • LG 55XS2E | Owners Manual - Page 94
    Time Setting (Command: s n, c3) Set on/off schedule for Analog Signage BLU. Transmission (s)(n)( )(Set ID)( )(c)(3)( )(Data1)( )(Data2)( ) ( * This feature may not be supported on some models. 106. BLU Manual On/Off (Command: s n, c4) Control on/off for BLU Manual. Transmission (s)(n)( )(Set ID)(
  • LG 55XS2E | Owners Manual - Page 95
  • LG 55XS2E | Owners Manual - Page 96
    INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating the your set and retain it for future reference. webOS 3.0 www.lg.com
  • LG 55XS2E | Owners Manual - Page 97
    Signage Setup 5 Power On Status Wake On LAN LAN Daisy Chain Power Off Management Rotation Beacon Baudrate (9600/115200) Power On Delay (0 ~ 250) Check Screen Digital Analog Signage BLU Setting Crestron Enterprise Settings No Signal Image Signage 365 Care Quiet mode (Fan OFF) Factory Reset Guide to
  • LG 55XS2E | Owners Manual - Page 98
    3 ENGLISH --Fail Over 22 Off Auto Manual --ISM Method 23 Mode Repeat Wait Duration Repeat Day Start Time End Time Action Cycle Bar Image Bar Color Transparency Direction Bar Image Download User
  • LG 55XS2E | Owners Manual - Page 99
    ID (The top right corner ) is displayed, enter your password. (The default value is 0, 0, 0, 0 ) 3 When the Installation Menu is displayed, select the desired option. -- Signage Setup -- USB Cloning -- Password Change -- Fail Over -- ISM Method -- Server -- Lock Mode NOTE •• Images in the
  • LG 55XS2E | Owners Manual - Page 100
    ENGLISH 5 INSTALLATION MENU NOTE •• Some features described in the Installation manual may not be supported in certain models. Signage Setup Use this menu to configure the digital signage after installation. Power On Status •• You can select the operating status of the monitor when the main power
  • LG 55XS2E | Owners Manual - Page 101
    set to Photo or Movie (OLED models support the Movie option only.) 2. When Fail Over is set to Auto or Manual -- If you set this option to 10 to the digital signal processing of the connected DVI-D/HDMI port. -- Setting this option to Clock only checks for the signals from the digital clock. If
  • LG 55XS2E | Owners Manual - Page 102
    ENGLISH 7 •• PM Mode -- Power Off: Normal DC off status. -- Sustain Aspect Ratio: Normal DC off status except that Switching IC stays on. On certain models, this applies only to a specific input mode (DisplayPort) and has the same effect as Screen Off Always in other input modes. -- Screen Off:
  • LG 55XS2E | Owners Manual - Page 103
    •• OSD Portrait Mode -- This feature allows you to rotate the OSD clockwise. -- You can set this feature to Off/90/180/270. (Some models only support certain settings.) -- If you set this feature to Off, the feature is disabled. -- If you set this feature to 90, the OSD rotates 90 degrees
  • LG 55XS2E | Owners Manual - Page 104
    Supports LG Beacon/iBeacon/Eddystone Type Beacon features. •• LG Beacon/iBeacon -- Beacon UUID (hex): Sets the UUID. 1. Field1: 4byte hex value (8 digits) 2. Field2: 2byte hex value (4 digits) 3. Field3: 2byte hex value (4 digits Some models do not support background scanning services in iOS. •• A
  • LG 55XS2E | Owners Manual - Page 105
    or DISPLAYPORT ports to the Audio In port. •• If Digital is selected in DVI-D when using OPS/HDMI3/DVI-D You can view photos and videos without manually selecting the View Photos/Movies menu. Signage automatically searches and plays photos from a USB. (This feature is not supported in OLED models.)
  • LG 55XS2E | Owners Manual - Page 106
    in multi-mode. •• If it is Off, the image of each display is displayed in single mode. •• The multi-mode is available in a PC supporting DisplayPort 1.2. •• Multi-mode can connect up to only four monitors. (at the recommended resolution.) •• When this function is used, your monitor may not work
  • LG 55XS2E | Owners Manual - Page 107
    the selected device. Selecting the files will activate the SYNC NOW button at the top and make the next step available. -- Only MP4 files are supported, and all files must be located in the SyncPlay folder in the root directory of the device. -- Before using Network Sync, set the proxy server
  • LG 55XS2E | Owners Manual - Page 108
    information when an HDMI signal is entered. •• Even if the HDMI IT Contents function has changed the Picture mode, you can change the Picture mode manually. •• As this has a higher priority than the Picture mode set by the user, the existing Picture mode may change when the HDMI signal is changed
  • LG 55XS2E | Owners Manual - Page 109
    simple browsing. •• The browser can perform basic tests for HTML-based apps and has the following properties: -- Supports basic web page browsing. -- Does not support additional features that aid the proper display of specific sites (UA Spoofing per site, etc.). •• The browser has the following
  • LG 55XS2E | Owners Manual - Page 110
    impossible to play content between the start time and end time of the playback schedule registered in Signage. However, this does not apply when termination was made using the remote control. -- 7. -- Some of the features above may not be supported on certain models. •• Only SMTP Port 25, 587 is
  • LG 55XS2E | Owners Manual - Page 111
    SIMPLINK Setup is set to On, you can use the SIMPLINK provided by LG Signage. •• Device ID: S ets the ID of the device connected via CEC is disabled. •• If Local Dimming is set to Off on a model that supports the Local Dimming feature, the screen's brightness and darkness may not display properly.
  • LG 55XS2E | Owners Manual - Page 112
    Setting •• Sets the function to control the Analog Signage BLU. •• On/Off Time Setting: Adjusts the schedule of the BLU. •• BLU Manual On/Off: Use the On or Off setting to set the BLU to On or Off without being associated with the schedule function. Crestron •• This
  • LG 55XS2E | Owners Manual - Page 113
    solution for fault diagnosis and prediction service. •• Install: Installs the Signage 365 Care solution. 1) ENTER ACCOUNT NUMBER: Enters the 6-digit account number to install the Signage 365 Care solution. -- Account Number: The number assigned when the Signage 365 Care solution is registered. When
  • LG 55XS2E | Owners Manual - Page 114
    ENGLISH 19 Guide to Using Content Rotation [Portrait installation setting] You can turn the image into a portrait image using Content Rotation. When installing the display rotated 90 degrees:
  • LG 55XS2E | Owners Manual - Page 115
    20 ENGLISH [Video wall installation setting] You can implement a landscape and portrait video wall using Content Rotation. Example) Tile mode 2 x 2 * Landscape video wall * Portrait video wall -- Set Content Rotation to 90 Original 2 2 2 2 Tile Mode 2 Rotating displays (90 degrees) Content
  • LG 55XS2E | Owners Manual - Page 116
    Delay, Set ID, items under Network, White Balance, Tile ID, current input signal (Input), Signage setup menu - master/slave mode, time sync, all menus in the ISM method menu (except for purposes. Enter a new 4-digit password. Enter the same password again in Confirm Password for confirmation.
  • LG 55XS2E | Owners Manual - Page 117
    Case 1) 1. HDMI, 2. DVI-D, 3. DISPLAYPORT, 4. OPS, 5. RGB, 6. Internal Memory Case 2) 1. HDMI1, 2. HDMI2, 3. OPS/HDMI3/DVI-D or OPS/DVI-D, 4. DP, 5. Internal Memory Manual •• The input source changes according to the specified order. When several input sources are found, the input source with the
  • LG 55XS2E | Owners Manual - Page 118
    ENGLISH 23 ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode •• Selects the desired ISM Method mode. •• Normal: Disables the ISM method. •• White Wash: Displays a white
  • LG 55XS2E | Owners Manual - Page 119
    ENGLISH 24 Repeat •• Off, just 1 time: If you select the desired mode and press DONE, ISM operates immediately. •• On: If the screen remains still for a specified wait time, ISM operates for the specified duration time. •• On, with moving detection: Only applies to Orbiter mode. If the screen
  • LG 55XS2E | Owners Manual - Page 120
    ENGLISH 25 Action Cycle •• You can select from among 1-10 mins/20 mins/30 mins/60 mins/90 mins/120 mins/180 mins/240 mins. •• This option is available only when you have selected Inversion or Orbiter. •• Orbiter: Moves the position of the screen at specified intervals. •• Inversion: Inverts the
  • LG 55XS2E | Owners Manual - Page 121
    .) •• This option is available only when you have selected User Video. •• Audio is not supported. * How to reset or delete downloaded bar images/user images/user videos •• To reset, go to Installation > Signage Setup > Factory Reset. •• To delete, go to Internal Memory under My Media's Devices item
  • LG 55XS2E | Owners Manual - Page 122
    - indicates that your monitor is connected to the SuperSign server and has been approved. Port Number •• Sets the SuperSign server's port. (Supported on SuperSign Premium 1.0 or later) Secured Connection •• You can choose whether to use security protocols when connecting to the SuperSign server
  • LG 55XS2E | Owners Manual - Page 123
    ENGLISH 28 Lock Mode USB •• You can prevent the use of USB devices. OSD •• You can prevent OSD from displaying. Wi-Fi •• This feature enables you to turn the Wi-Fi feature on or off. Reset to Initial Settings •• You can restore the initial settings with this feature. IR Operation •• If you set IR
  • LG 55XS2E | Owners Manual - Page 124
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
Please read this manual carefully before operating your set and retain it
for future reference.
49XS2E
55XS2E
OWNER’S MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)
*SAC37733402*
(2007-REV02)