Home > LG Manuals > Projectors > LG BX327 > Manual Viewer

LG BX327 User Manual - Page 37

LG BX327 Manual

Page 37 highlights

Function Network Setup ▪▪ Use a standard LAN cable with this Projector. Cat5 or better with a RJ45 connector. ▪▪  Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. ▪▪  A 10 Base-T or 100 Base-TX LAN port is required for connection to this Projector. If your internet service does not allow for such a connection, you will not be able to connect the Projector. ▪▪  To connect to the wireless router, a router that supports wireless connection is necessary, and the wireless connection function of the corresponding router must be activated. ▪▪  To connect to a wireless router, verify the SSID and security setting of the wireless router. Please refer to the user guide of the corresponding router for SSID and security setting of the wireless router. ▪▪  When Ad-hoc is used, it may not be able to connect according to the device (for example : notebook computer) that is connected. ▪▪ The connection method may vary according to the manufacturer of the wireless router. LAN AUDIO IN  onnect the LAN of the projector and the LAN port C of the PC or network with a LAN cable (Cross cable). LAN Cable LAN AUDIO IN LAN Cable Connecting PC 37

Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

LG BX327 Manual