LG CF3DAT Owners Manual
LG CF3DAT Manual
 |
View all LG CF3DAT manuals
Add to My Manuals
Save this manual to your list of manuals |
LG CF3DAT manual content summary:
- LG CF3DAT | Owners Manual - Page 1
OWNER'S MANUAL LCOS PROJECTOR Please read this manual carefully before operating your projector and retain it for future reference. CF3DAT P/NO: MFL67281303 (1111-REV00) www.lg.com - LG CF3DAT | Owners Manual - Page 2
PROJECTOR of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION - TO REDUCE THE the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE - LG CF3DAT | Owners Manual - Page 3
Establishing Serial Communication 43 Communication Protocol 43 Communication using Hyper Terminal 49 Miscellaneous Supported Monitor Display 51 Maintenance 52 Do not turn off the projector 54 Troubleshooting 56 Product Specifications 57 Open Source software Information 58 MEMO 59 3 - LG CF3DAT | Owners Manual - Page 4
' and 'Notes' as detailed below. Warning: The violation of this instruction may cause serious injury and even death. Note: The violation of this instruction may cause injury or damage to the projector. ꔈ Read the owner's manual carefully and keep it at hand. Indoor Installation Warning Do not - LG CF3DAT | Owners Manual - Page 5
the projector, please switch it off and unplug it from the power outlet and contact an LG Make appliance and has no additional outlets or branch circuits.Check the specification page of this owner's manual appliance, and have the cord replaced with an exact replacement part by authorized service - LG CF3DAT | Owners Manual - Page 6
hazard or cause electric shock. In the unlikely event of smoke or a strange smell coming out from the projector, switch it off, unplug it from the power outlet and contact the LG Electronics Service Center. Otherwise, it may create a fire hazard or result in electric shock. Use an air spray or - LG CF3DAT | Owners Manual - Page 7
Instructions Outdoor Antenna Grounding Disposal of your old appliance with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to Service GroundingElectrode System (NEC Art 250, Part H) old appliance, please contact your city office, waste disposal service - LG CF3DAT | Owners Manual - Page 8
Safety Instructions Disposal of waste batteries/accumulators 1. When this crossed information about disposal of Your old batteries/accumulators, please contact Your city office, waste disposal service or the shop where You purchased the product. * The fluorescent lamp used in this product contains - LG CF3DAT | Owners Manual - Page 9
used to operate the Camera Calibration function. Lens, Lens Cap * Be sure to open the lens cap before using the projector. * Do not touch the lens while the projector is in use. Control Panel AUTO button Adjusts the picture position and minimizes image shaking. MENU Button Selects or closes menus - LG CF3DAT | Owners Manual - Page 10
Parts and Components Back ANTENNA IN port RS232C port RGB port USB (SVC ONLY) port LAN port HDMI IN 1,2 port HDMI IN 1 HDMI IN 2 RGB IN ANTENNA IN Y USB(SVC ONLY) PB PR COMPONENT IN VIDEO OPTICAL OUT RS-232C LAN AC IN port A sensor receiving the remote control signal. * Be - LG CF3DAT | Owners Manual - Page 11
can see light on the remote control buttons.) TV button PREVIOUS CHANNEL button FAVORITE button 3D button CHANNEL/PAGE button MUTE button RATIO button Q.MENU button AUTO INFO BACK VIDEO COMP insert batteries as described by the ＋－ instructions. ꔈ Use new batteries of the same kind (1.5V AAA). 11 - LG CF3DAT | Owners Manual - Page 12
(It takes about 90 seconds for the lamp to switch off completely.). An error has occurred in the internal cooling fan. High temperature warning. The projector is automatically turned off due to excessive heat. The lamp is reaching the end of its life and needs to be replaced with a new lamp - LG CF3DAT | Owners Manual - Page 13
2 KEY.S BLANK PATTERN STILL Remote Control Battery (AAA) 2EA User Guide 3D Glasses Power Cord Polishing Cloth eZ-Net Manager CD Top Filter Bottom Filter accessories may be added. Ceiling mount for projector Projection Screen (3D) Lamp Computer Cable HDMI Cable Video Cable Component Cable - LG CF3DAT | Owners Manual - Page 14
dust. ꔈ There is risk of fire. Do not remove any covers except for the lens cap. There is a high risk of electric shock. The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear - LG CF3DAT | Owners Manual - Page 15
on the screen will be crooked. If the screen image is crooked, use the Keystone function. 4. Connect the power cords of the projector and any connected devices to the power outlet. Screen Height (X) Screen Width (Y) Screen X/2 X/2 Projection distance (D) Lens shift Max. 0% Max. Y/2 Screen 80 - LG CF3DAT | Owners Manual - Page 16
Press the POWER button. The power indicator blinks green. ꔈ Power on time is long due to the characteristics of the 3D projector. ꔈ Press the INPUT button to select an input signal. ꔈ There will be a brief sound when the projector is turned on. ꔈ Check if the lens cap is open before turning on the - LG CF3DAT | Owners Manual - Page 17
image up or down, use the lens shift dial at the top of the projector to adjust the height as shown below. Lens shift dial ꔈ Turn the LENS Select an input signal using the remote control's INPUT button to connect the projector to the desired input. You can toggle between inputs using the ＜, ＞ - LG CF3DAT | Owners Manual - Page 18
more than two TVs. * If you have any problems with antenna installation, please consult a specialist retailer or the . * See page 51 for a list of supported monitors. Connect the projector's RGB IN port to the computer's RGB output manual.) Computer Cable UV565F Computer Cable 18 - LG CF3DAT | Owners Manual - Page 19
. (Y=Green, PB=Blue, PR =Red) Component Cable Connecting to a DTV Set-Top Box * Please refer to the user manual of the DTV set-top box to connect to the projector, as well as for instructions on how to use the DTV set-top box. 1. Connect the - LG CF3DAT | Owners Manual - Page 20
if you experience a headache, fatigue or dizziness. • If you are pregnant, a senior, have heart problems or easily feel motion sickness, we recommend you do not view 3D images. - Because 3D images can cause disorientation and confusion, some viewers may get surprised or overexcited. • Do not watch - LG CF3DAT | Owners Manual - Page 21
Bottom, Side by Side ꔈ To play videos and media in HDMI 3D Frame Packing, HDMI 3D Side by Side or HDMI 3D Top & Bottom, the player need to support these formats. ꔈ HDMI 3D Frame Packing, HDMI 3D Side by Side or HDMI 3D Top & Bottom formatted video is converted into stereoscopic format automatically - LG CF3DAT | Owners Manual - Page 22
button during viewing to exit 3D mode and watch 2D video. 3D Mode Watch the original image. 2D → 3D 2D Off Cancel 3D Mode Watch the original image. 3D → 2D 3D Off Cancel Option 3D → 2D 3D Off 2D → 3D Cancel Watch 3D image in 2D mode. Watch the original image. Show 3D effects. Close the pop - LG CF3DAT | Owners Manual - Page 23
Function Function * The On-Screen Display (OSD) in this manual is an example to help you understand how to operate the product, and may be slightly different on your projector. * Most of the examples shown are with RGB (PC) input. Channel Functions Auto Tuning 1. Press the MENU button, then go - LG CF3DAT | Owners Manual - Page 24
Function Editing Channels 1. Press the MENU button, then go to Channel with the buttons and press OK ㅦ. 2. Press the ˭ ˮbuttons to go to Channel Edit and press OKㅦ 3. Press the buttons to select a channel to edit 4. The following buttons are used to edit channels. ꔉ Ch. Change ꔂ - LG CF3DAT | Owners Manual - Page 25
Function Displaying Program Information If you press the Info button or OK button on the remote control, the program information is displayed on the screen. ⬟ Banner information DTV 11-1 ꘋ ꔫ ABC Brief Info Title Test.. Sat, Jul 2, 2011 6:30 PM 7:45 PM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ⬡ - LG CF3DAT | Owners Manual - Page 26
Function Video Function Picture Mode * The best picture quality is maintained according to the selected picture option. 1. Press the PICTURE button on the remote control. 2. Press the ˭ ˮ buttons to select a picture Mode. Vivid Standard Natural Expert 2 Cinema Expert 1 Game ꔈ You can - LG CF3DAT | Owners Manual - Page 27
to go to a desired picture option and press OKㅦ 3. Press the ʻ ʼbuttons to adjust the picture settings and press OK ㅦ PICTURE 3D Mode Picture Mode : Vivid • Contrast 100 • Brightness 50 • Sharpness 80 • Color 60 • Tint 0 • Advanced Control ꔍ ꔂ Move ꔉ OK R G ꔈ For each option and - LG CF3DAT | Owners Manual - Page 28
Function * Configurable options may differ depending on input signal or video settings, etc. - This function is available only for Vivid/Standard/Natural/Cinema/Sport/Game. Color Temperature ꔈChanges the color saturation settings. Warm will have more reds and cool will have more blues. Noise - LG CF3DAT | Owners Manual - Page 29
Function Picture Initialization Function * The settings for each input and Picture Mode are reset to the factory defaults. 1. Press the MENU button, then go to Picture with the buttons and press OKㅦ 2. Press the˭ ˮ buttons to go to Picture Reset and press OK ㅦ 3. Press the ʻ ʼ buttons to - LG CF3DAT | Owners Manual - Page 30
* Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector at an optimal angle. 1. Press the KEY.S button on the remote control. Keystone ꔂ Move ꕉ Prev Top left ꔃ 2. Press the ˭ ˮ buttons to select a desired - LG CF3DAT | Owners Manual - Page 31
Adjust the volume of an audio receiver if only SPDIF is connected without a headset. Stereo/SAP Broadcast Setup * On analog signals, this projector can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound - LG CF3DAT | Owners Manual - Page 32
If the current time is incorrect, use Manual to set it again. < Manual Setup > 3. Pressʻ ʼbuttons to go to Manual. TIME Clock Off Time On Time Sleep screen. Scheduling On and Off * You can set the On/Off Time of the projector. TIME Clock Off Time On Time Sleep Timer: Off Auto Off ꔎ Jan. 21, - LG CF3DAT | Owners Manual - Page 33
Function Using SLEEP Function * The projector can be turned off at a preset time. 1. Press the SLEEP BACK button to exit the menu screen. 90 min. Auto Off * If there is no signal, the projector automatically turns off after the preset time has elapsed. 1. Press the MENU button, then go to Time - LG CF3DAT | Owners Manual - Page 34
the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This projector is programmed to memorize the caption/text mode which was last set when you turned the power off. This function is only available when - LG CF3DAT | Owners Manual - Page 35
ꔉ : Normal : Off : 1 Camera Calibration * This function automatically adjusts the brightness of the left and right engines of the 3D video projector, to provide a comfortable 3D video viewing environment by reducing eye strain when viewing. 1. Press the MENU button, then go to OPTION with the - LG CF3DAT | Owners Manual - Page 36
. (Cat5, Cat5E, or Cat6 with an RJ45 connector) • If you experience any connection problems, restart your modem. • A 10 Base-T or 100 Base-TX LAN port is required to connect to this projector. If your ISP (Internet Service Provider) does not provide such a connection, you will not be able to connect - LG CF3DAT | Owners Manual - Page 37
Calibration Lamp Mode IP Auto Setting : Normal High Altitude IP Manual Setting Network Setting Set ID Close : On 4. Press the ˭ ˮ buttons PC. Please refer to the eZ-Net Manager Guide for details of network settings. :: Example:: PC Projector IP Address 192.168.0.10 192.168.0.254 Subnet - LG CF3DAT | Owners Manual - Page 38
Function Setting SET ID * Set ID is 1 - 99. * Only the saved Set ID is effective. 1. Press the MENU button, then go to OPTION with the buttons and press OK ㅦ 2. Press the ˭ ˮ buttons to go to SET ID and press OKㅦ OPTION Blank Image Camera Calibration Lamp Mode High Altitude Network Setting - LG CF3DAT | Owners Manual - Page 39
Function PARENTAL CONTROL/RATINGS * Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs - LG CF3DAT | Owners Manual - Page 40
go to LOCK with the buttons and press OK ㅦ 2. Press the 0 - 9 buttons to set a password. ꔈ The password is entered. ꔈ The initial password of projector is "0-0-0-0". ꔈ Press the BACK button to exit the menu screen. LOCK Lock System: Off Set Password Block Channel Movie Rating TV Rating-Children - LG CF3DAT | Owners Manual - Page 41
blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on projector, not TV programs, such as soap operas. 1. Press the MENU button. Then, move to LOCK with the buttons and press the ㅦOK button. 2. Press the - LG CF3DAT | Owners Manual - Page 42
, TV-14, TV-MA applies to TV-PG, TV-14, TV-MA * This function is available only for digital channels. This function operates only when projector has received Region5 Rating data. 1. Press the MENU button. Then, move to LOCK with the buttons and press the ㅦOK button. 2. Press the number 0 - 9 to - LG CF3DAT | Owners Manual - Page 43
the Network Settings. Establishing Serial Communication * Connect the RS-232C (serial connector) of the PC to the RS-232C connector at the back of the projector. * You need to purchase a cable to connect the RS-232C connectors as it is not provided as an accessory. • A RS-232C cable is necessary - LG CF3DAT | Owners Manual - Page 44
projector itself will return the data from the PC if it is in data write mode. 3. Error Acknowledgement [Command2] [ ] [Set ID] [ ] [NG] [Data] [x] * If a set receives an abnormal piece of data such as a non-supported Select 20. Key 21. Picture Mode 22. 3D 23. 3D Option Control Command1 k k k k k k - LG CF3DAT | Owners Manual - Page 45
Function 01. Power (Command:ka) ⇒ Controls power On/Off of the projector. Transmission [k] [a] [ ] [Set ID] [ ] [Data] [Cr] Data 0 : Power Off 1: Power On Ack [a] [ ] [Set ID] [ ] [OK] [Data] [x] Data 0 : Power Off 1: Power On ⇒ Gives information about power On/ - LG CF3DAT | Owners Manual - Page 46
control is not being used. When the remote control lock is On, all the buttons on the control panel and remote control do not support the Set function. 11 . OSD Select (Command : kl) ⇒ Selects OSD On/Off. Transmission [k] [l] [ ] [Set ID] [ ] [Data] [Cr] Data 0: OSD Select Mode Off 1: OSD Select - LG CF3DAT | Owners Manual - Page 47
Function 16. Black Level (Command: nm) ⇒ Adjusts the value of Black Level Transmission [n] [m] [ ] [Set ID] [ ] [Data] [Cr] Data 0: Low 1: High (* Transmitted in hexadecimal code) Ack [m] [ ] [Set ID] [ ] [OK] [Data] [x] Data 0: Low 1: High 17. Lamp Mode (Command: np) ⇒ A function used to set Lamp - LG CF3DAT | Owners Manual - Page 48
0x0E 0xDC 0x6F 0x0F 0x5A 0xBF 0xD5 0xCE 0xCC 22. 3D (Command: xt) ⇒ Controls 3D. Transmission [x][t][][Set ID][][Data1][][Data2][][Data3][][Data4][Cr] Data 1 (3D Mode) 0: 3D Mode on 1: 3D Mode off 2: 3D to 2D 3: 2D to 3D Data 2 (3D Format) 0: TOP and BOTTOM 1: Side by Side 2: Check Board - LG CF3DAT | Owners Manual - Page 49
Communication using Hyper Terminal You can control multiple projectors from a single computer using the protocol. 1. Setting Hyper Terminal 1. Specifying communication port in User Configuration 2. Set to 9600 Function 3. Set to Test registration information 4. Set to ASCII 49 - LG CF3DAT | Owners Manual - Page 50
Function 2. Example of entering input switching command by using Hyper Terminal. 50 - LG CF3DAT | Owners Manual - Page 51
. Resolution Vertical Frequency (Hz) Horizontal Frequency (kHz) Miscellaneous * If the projector does not support the input signal, the "Invalid Format" message appears on the screen. * The projector supports the DDC1/2B type as a Plug & Play function. (Auto-recognition of PC monitors) * PC - LG CF3DAT | Owners Manual - Page 52
therefore very important. If replacement parts are required, contact your seller or an LG Electronics Service Center. To clean the parts of a projector, turn off the projector and pull the plug from the power outlet. Clean the projector more often if it is used for commercial purposes or it is used - LG CF3DAT | Owners Manual - Page 53
the filter cover lock in the reverse direction of the arrow until it clicks. 1. Turn off the projector and unplug the power cord. Place the projector on a table or flat surface. 2. Take out the filter by pulling the bottom filter in the 3. direction of the arrow as - LG CF3DAT | Owners Manual - Page 54
the lamp to cool down for 1 hour before replacing it. ꔈ Replace only with the same type of lamp from an LG Electronics Service Center. Using another manufacturer's lamp may damage the projector and lamp. ꔈ Only pull the lamp out when replacing it. ꔈ Keep the lamp unit out of reach of children. Keep - LG CF3DAT | Owners Manual - Page 55
lamp to cool down for 1 hour before removing the used lamp from the projector because it is very hot.) 2. Unscrew the screws from the lamp cover using lamp cover is open, the lamp warning indicator will be blink red and the projector will not be turned on.) Make sure to use the same type of lamp - LG CF3DAT | Owners Manual - Page 56
Troubleshooting Please check the following when there is a problem with the projector before contacting LG Electronics Service supported (or 'No A. The projector cannot interpret the computer signal. supported mode')" is displayed. Check supported low in MENU CHANNEL Manual Tuning, contact your - LG CF3DAT | Owners Manual - Page 57
Impedance Headphone, earphone Height (mm) Width (mm) Length (mm) Weight (kg) CF3DAT (CF3DAT-JS) 1920 (H) x 1080 (V) pixels 16:9 (H:V) 15.4 Wide: 0.88 m thickness: 3.5mm 190 501 560 21.1 Operation environment Projector lamp Temperature Operating temperature: 0°C to 35°C Storage temperature - LG CF3DAT | Owners Manual - Page 58
GPL/LGPL/MPL execution files and libraries in this projector comply with the GPL 2.0/ LGPL 2.1/MPL 1.1 license agreement. GPL execution files: Linux kernel 2.6, busybox, lzo, u-boot LGPL library: uClibc MPL library: nanox You can ask LG Electronics for the source codes at the e-mail address - LG CF3DAT | Owners Manual - Page 59
MEMO Miscellaneous 59 - LG CF3DAT | Owners Manual - Page 60
The model and serial number of the projector is located on the back or one side of the projector. Record it below should you ever need service. MODEL SERIAL LG Customer Information Center 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
 |
 |
OWNER'S MANUAL
LCOS PROJECTOR
CF3DAT
Please read this manual carefully before operating
your projector and retain it for future reference.
www.lg.com
P/NO: MFL67281303 (1111-REV00)