LG DLG3788W Owners Manual - Page 16

Option 1: 3-Wire Connection with, a Power Supply Cord

Get LG DLG3788W PDF manuals and user guides View all LG DLG3788W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Option 1: 3-Wire Connection with a Power Supply Cord If your local codes or ordinances permit the connection of a frame-grounding conductor to the neutral wire, use these instructions. If your local codes or ordinances do not allow the connection of a frame-grounding conductor to the neutral wire, use the instructions under Section 3: Optional 3-wire connection. C gf a. 3-wire receptacle (NEMA type !0-30R) b. 3-wire plug c. Neutral prong d. Spade terminals with up turned ends e. 3/4 in. ( !.9 cm) UL approved strain relief f. Ring terminals g. Neutral (white or center wire) . Loosen or remove center terminal block screw. 2. Connect neutral wire (white or center wire) of power supply cord to the center, silver colored terminal screw of the terminal block. Tighten screw. O O a. External ground connector b. Neutral grounding wire (white) c. Center silver-colored terminal block screw d. Neutral wire (white or center wire) e. 3/4in. (!.9cm) UL-listed strain relief 3. Connect the other wires to outer terminal block screws. Tighten screws. 4. Tighten strain relief screws. 5. Insert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down screw. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Option 1: 3-Wire Connection with
a Power Supply Cord
If your
local
codes
or ordinances
permit
the
connection
of a frame-grounding
conductor
to the
neutral
wire,
use
these
instructions.
If your
local
codes
or ordinances
do not allow
the connection
of
a frame-grounding
conductor
to the neutral
wire,
use the
instructions
under
Section
3:
Optional
3-wire
connection.
C
g
f
a.
3-wire receptacle
(NEMA
type
!0-30R)
b.
3-wire plug
c.
Neutral prong
d.
Spade terminals
with up turned
ends
e.
3/4 in. ( !.9 cm) UL approved
strain relief
f.
Ring terminals
g.
Neutral
(white or center wire)
.
2.
Loosen
or remove
center
terminal
block
screw.
Connect
neutral
wire
(white
or center
wire)
of
power
supply
cord
to the center,
silver
colored
terminal
screw
of the terminal
block.
Tighten
screw.
O
O
a.
External
ground
connector
b.
Neutral
grounding
wire (white)
c.
Center silver-colored
terminal
block screw
d.
Neutral
wire (white or center wire)
e.
3/4in.
(!.9cm)
UL-listed
strain relief
3. Connect
the
other
wires
to outer
terminal
block
screws.
Tighten
screws.
4. Tighten
strain
relief
screws.
5. Insert
tab of terminal
block
cover
into
slot of
dryer
rear
panel.
Secure
cover
with
hold-down
screw.
16