LG DTT901 Owner's Manual - Page 6

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 6 Installation Connections with TV and over-the-air antenna 1. Connect the antenna to the "From Antenna" jack on this unit using a coaxial RF cable (N). 2. Connect the "To TV (RF)" jack on this unit to the "Antenna In" jack on your TV using a coaxial RF cable (R). Your TV must be tuned to the selected RF Output Channel (Refer to page 8) channel (3 or 4) to display the picture. (default: channel 3). OR Connect the VIDEO and AUDIO (L/R) jacks on this unit to the video and audio input jacks on the TV using the video (V) and audio (A) cable. 3. Plug the power cord into a power strip/surge protector or a wall outlet. Notes • Set "Audio Output" option to "Mono" if the unit is connected to TV with RF cable (See page 10). • "To TV (RF)" jack passes the analog signal from the "From Antenna" jack to your TV/monitor if the unit is turned off or unplugged. Antenna TV ANTENNA INPUT NR AV Connecting to a VCR You can record a tuned TV program on the unit by connecting a VCR or similar recording device. Connect the "VIDEO OUT" and "AUDIO OUT (L/R)" jacks on the unit to the "A/V IN" jack on your VCR using RCA-type cables. See also the owner's manual supplied with the connected equipment. VCR Rear of this unit Connecting to an Amplifier (Receiver) You can enjoy the sound by connecting your audio component such as an AV amplifier (receiver). Connect AUDIO OUT (L/R) jacks on the unit to the audio left and right in jacks on your amplifier, receiver, or stereo system, using an audio cables. See also the owner's manual supplied with the connected equipment. Amplifier (Receiver) Rear of this unit 6 Rear of this unit