LG E2441T-BN Owners Manual

LG E2441T-BN Manual

Get LG E2441T-BN PDF manuals and user guides View all LG E2441T-BN manuals
Add to My Manuals
Save this manual to your list of manuals

LG E2441T-BN manual content summary:

  • LG E2441T-BN | Owners Manual - Page 1
    ENGLISH OWNER'S MANUAL LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LCD MONITOR MODEL E1941T E1941S E2041T E2041S E2241T E2241S E2341T E2441T E2541T www.lg.com
  • LG E2441T-BN | Owners Manual - Page 2
    service provider for a replacement. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual to human, problem to product and
  • LG E2441T-BN | Owners Manual - Page 3
    However, this is characteristic of the fixed-resolution LCD panel. Leaving a fixed image on the screen product. Burn-in and related problems are not covered by the warranty on this product. Do not shock shock or fire. Contact an authorized the service center for repair. Avoid high temperatures and
  • LG E2441T-BN | Owners Manual - Page 4
    Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub
  • LG E2441T-BN | Owners Manual - Page 5
    LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. User's Guide/Cards Power Cord DVI-D Signal Cable (Only E1941T/E2041T/E2241T/ E2341T/E2441T/E2541T) (This feature is not available in all countries.) 15-pin D-Sub
  • LG E2441T-BN | Owners Manual - Page 6
    of the stand base and turn the screw clockwise to tighten. 5. Once assembled take the monitor up carefully and face the front side. Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down
  • LG E2441T-BN | Owners Manual - Page 7
    Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on aflat surface. 2. Place the monitor face Down on the cushion or soft cloth. 3.Remove the Stand Body and Stand Base from product in correct direction as shown in the picture. 4.
  • LG E2441T-BN | Owners Manual - Page 8
    Range : -5˚ to 15˚ Do not touch or press the screen when adjusting the angle of the monitor. When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s). ERGONOMIC It is recommended that in order
  • LG E2441T-BN | Owners Manual - Page 9
    E1941T/E2041T/E2241T/E2341T/E2441T/E2541T Connecting with the PC 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, individual input signals. 'AUTO' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted
  • LG E2441T-BN | Owners Manual - Page 10
    Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. Power individual input signals. 'AUTO' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted
  • LG E2441T-BN | Owners Manual - Page 11
    Control Panel Functions Front Panel Controls MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the
  • LG E2441T-BN | Owners Manual - Page 12
    your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only Analog Mode) This will automatically adjust automatically detected. The default setting is D-Sub. (Only E1941T/E2041T/E2241T/E2341T/E2441T/E2541T ) EXIT Button Exit the OSD(On Screen Display). Power Button & Power
  • LG E2441T-BN | Owners Manual - Page 13
    On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The
  • LG E2441T-BN | Owners Manual - Page 14
    , and setting menus. DSUB : D-SUB(Analog signal) input DVI-D : DVI-D(Digital signal) input Main menu MENU Sub-menu BRIGHTNESS ORIGINAL RATIO Supported input Description DSUB DVI-D To adjust the brightness of the screen To adjust the image size COLOR TEMP (PRESET / USER) CONTRAST LANGUAGE
  • LG E2441T-BN | Owners Manual - Page 15
    according to input image signal. ORIGINAL Change the input image signal ratio to original. * This function works only if input resolution is lower than monitor ratio (16:9). PRESET USER Exit : Exit , , : Move : Select another sub-menu Select the screen color. •WARM : Set the screen to warm color
  • LG E2441T-BN | Owners Manual - Page 16
    On Screen Display(OSD) Selection and Adjustment Main menu Description To adjust the contrast of the screen. To choose the language in which the control names are displayed. Restore all factory default settings except "LANGUAGE." Press the , buttons to reset immediately. Exit : Exit , , : Move :
  • LG E2441T-BN | Owners Manual - Page 17
    OSD appears. Menu Name Icons Sub-menus Button Tip Exit Move Restart to select sub-menu NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. 16
  • LG E2441T-BN | Owners Manual - Page 18
    fuction. When current setting value is ON,the SUPER SAVING color is green. OFF Turn off the SUPER ENERGY SAVING function.Now the monitor is LED SAVING function. When current setting value is OFF,the SUPER SAVING color is gray. RESET Clear the TOTAL POWER REDUCTION and TOTAL CO2 REDUCTION
  • LG E2441T-BN | Owners Manual - Page 19
    DATA(W/h): 19 inch 20 inch 22 inch 23 inch 24 inch 25 inch SUPER SAVING 3 3 4 5 5 5 LED SAVING 3 18 15 12 17 12 Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG accumulate those values using integrated function with 10 minutes
  • LG E2441T-BN | Owners Manual - Page 20
    Troubleshooting Check the following before calling for service. No image appears G Is the power cord of of horizontal or vertical the screen? frequency range of the display. See the 'Specifications' section of this manual and configure your display again. G Do you see a "CHECK SIGNAL CABLE"
  • LG E2441T-BN | Owners Manual - Page 21
    Troubleshooting Display image to the ideal setting. Set the color setting higher than 24 bits (true color). IMPORTANT Check Control Panel --> Display --> Settings Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to
  • LG E2441T-BN | Owners Manual - Page 22
    , Plug&Play (VESA DDC) monitor found" message? G Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. • Make sure to check
  • LG E2441T-BN | Owners Manual - Page 23
    Specifications E1941T Display 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal ) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Plug&Play Max Recommend VESA 1366 x 768 @ 60 Hz VESA 1366 x 768 @ 60 Hz DDC 2B(Analog,Digital) Power Consumption On Mode
  • LG E2441T-BN | Owners Manual - Page 24
    Specifications E1941S Display 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Plug&Play Max Recommend DDC 2B VESA 1366 x 768 @ 60 Hz VESA 1366 x 768 @ 60 Hz Power Consumption On Mode Sleep Mode Off Mode
  • LG E2441T-BN | Owners Manual - Page 25
    Specifications E2041T Display 50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD ohm), Digital Resolution Max Recommend VESA 1600 x 900 @ 60 Hz VESA 1600 x 900 @ 60 .74 inch ) Height 30.3 cm ( 11.92 inch ) Depth 5.7 cm ( 2.24 inch ) Weight(excl. packing) 2.7 kg ( 5.95 lb ) Range Tilt : -5˚
  • LG E2441T-BN | Owners Manual - Page 26
    Specifications E2041S Display 50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Plug&Play Max Recommend DDC 2B VESA 1600 x 900 @ 60 Hz VESA 1600 x 900 @ 60 Hz Power 74 inch ) Height 30.3 cm ( 11.92 inch ) Depth 5.7 cm ( 2.24 inch ) Weight(excl. packing) 2.7 kg ( 5.95 lb ) Range Tilt :
  • LG E2441T-BN | Owners Manual - Page 27
    Specifications E2241T Display 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz DDC 2B(Analog,Digital) Power Consumption On Mode Sleep Mode Off Mode : 24 W(Typ.) < 0.3 W < 0.3 W Dimensions & Weight With Stand Width
  • LG E2441T-BN | Owners Manual - Page 28
    Specifications E2241S Display 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal ohm) Resolution Plug&Play Max Recommend DDC 2B VESA 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Power Consumption On Mode Sleep Mode Off Mode : 24 W(Typ.) < 0.3 W < 0.3 W
  • LG E2441T-BN | Owners Manual - Page 29
    Specifications E2341T Display 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Resolution Plug&Play Max Recommend VESA 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz 49 inch ) Height 34.2 cm ( 13.46 inch ) Depth 5.7 cm ( 2.24 inch ) Weight(excl. packing) 3.4 kg ( 7.49 lb ) Range Tilt :
  • LG E2441T-BN | Owners Manual - Page 30
    Specifications E2441T Display 60.97 cm (24 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal ) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Plug&Play Max Recommend VESA 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz DDC 2B(Analog,Digital) Power Consumption On
  • LG E2441T-BN | Owners Manual - Page 31
    Specifications E2541T Display 63.44 cm (25 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal ) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Plug&Play Max Recommend VESA 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz DDC 2B(Analog,Digital) Power Consumption On
  • LG E2441T-BN | Owners Manual - Page 32
    Specifications Preset Modes (Resolution) E1941T/E1941S *If you can't select 1366 x 768 in display property timing option, please update your video card driver from your video card vendor. Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) Polarity(H/V) 1 720 x 400 2 640 x 480 3
  • LG E2441T-BN | Owners Manual - Page 33
    Specifications E2241T/E2241S/E2341T/E2441T/E2541T Display Modes (Resolution) Horizontal Freq. (kHz) 1 720 x 400 2 640 x 480 3 640 x 480 4 800 x 600 5 800 75 +/+ 60 +/+ 75 +/+ 60 -/+ 60 +/+ *Recommend Mode Indicator MODE On Mode Sleep Mode Off Mode LED Color Blue Blue Blinking Off 32
  • LG E2441T-BN | Owners Manual - Page 34
    Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Place the monitor with its front facing downward on a soft cloth. 2. Remove the Stand Body and Stand Base from product in correct direction as shown in the picture. 33
  • LG E2441T-BN | Owners Manual - Page 35
    is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is stores. NOTE VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications Please use VESA standard as below
  • LG E2441T-BN | Owners Manual - Page 36
    Precautions before using the product. Keep the OWNER'S MANUAL(CD) in an accessible place for furture reference. The model and serial number of the SET is located on the back or one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
www.lg.com
OWNER’S MANUAL
LCD MONITOR
LCD MONITOR MODEL
E
1941T
E
1941S
E
2041T
E
2041S
E2241T
E
2241S
E
2341T
E
2441T
E
2541T
Please read this manual carefully before operating your set and
retain it for future reference.
ENGLISH