LG E970 User Guide - Page 15
Charging your phone, Removing the microSD card, Menu Key, All settings, General, Storage - battery removal
View all LG E970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Getting Started Charging your phone 1 Connect the wall adapter and USB cable as shown below. The USB symbol on the USB cable should face toward you. 2 Plug the USB cable (as shown below) into the phone's Charger/Accessory Port. Make sure the USB symbol is facing upwards. Always unplug the charger from the wall socket after the phone is fully charged to save unnecessary power consumption of the charger. n NOTE The battery must be fully charged initially to improve battery lifetime. n NOTE Your phone has an internal antenna. Be careful not to scratch or damage this rear area, as that will cause loss of performance. When the battery becomes fully discharged and you connect the phone to a charger, the LED lights for the keys at the bottom of the phone will blink. This is normal operation for a completely discharged battery to prevent overflowing current because the phone is designed to provide reasonable protection against damage to the battery. Once the battery has enough charge, the screen will turn on and display a battery image. Removing the microSD card To safely remove the microSD card from your phone, you must first unmount it. 1 From the Home screen, tap the Menu Key and tap All settings > General tab > Storage > Unmount SD card > OK. 2 Remove the back cover and gently pull the microSD card from the slot. 15