LG LDE3015ST Owner's Manual - Page 11

ENGLISH SURFACE CONTROLS COOKING HOT SURFACE INDICATOR The display will Flash HS(Hot Surface). When the surface is too hot to touch because of the heating element. It will remain on after the element is turned off and the surface has cooled to approximately 150 deg F. CAUTION • DO NOT touch surface elements until it has cooled down sufficiently. - The surface elements may still be hot and burns may occur. CAUTION • SURFACE ELEMENT CYCLES - W hen cooking on the surface elements it is possible for the element to cycle on and off during cooking. This will happen more frequently when a lower power is selected however it can also occur on higher settings as well. USING THE ELEMENT To turn on a SINGLE surface unit: (Left Rear, Right Rear, Left Front) ➊ Press ON/OFF for the desired element position. The display will flash . (If no further pads are pressed within 10 seconds, the display will disappear.) ➋ P ress + once to turn on the power level Hi or - once to Lo. ➌ Use the - / + to choose the desired power setting. - / + is continuously accessible. (Adjustable at any time while the element is ON.) ➍ To turn off the unit after cooking, press ON/OFF once. NOTE: • Each time a pad is pressed a beep will sound. • The power level decreases or increases by 0.5 from 9.0 through 3.0. (by 0.2 from 3.0 through 1.0) • Lo is the lowest power level available. NOTE: To scroll through the power levels quickly press and hold the - or + key pads until the power level desired is reached. CAUTION • NEVER leave food unattended at high or mediumhigh setting. - B oil overs can cause smoke. Greasy spillovers may catch on fire. 11