LG LFC23760SW Owner's Manual - Page 15

REFRIGERATOR INSTALLATION CLOSING AND ALIGNING THE DOORS Closing the Doors Your refrigerator has two front leveling screws, one on the right and one on the left. If your refrigerator seems unstable or if you would like the doors to close more easily, simply adjust the inclination of the refrigerator by following the instructions below: Aligning the Doors If the spacing between the doors is uneven, follow the instructions below to align them: 1. With one hand, lift up the door you want to raise at middle hinge. 1. Plug the refrigerator into a 3 prong grounded outlet. 2.With other hand, use pliers to insert snap ring as Move the refrigerator into its final position. shown. 2.Remove the base grille (Refer to the section on 3.Insert additional snap rings until the doors are aligned "Installation of Base Grille"). (Three snap rings are provided per unit). 3. Use a flat head screwdriver to adjust the leveling screws, turning clockwise to raise the side of the refrigerator and counter-clockwise to lower it. It may take several turns to adjust it to the inclination you would like. NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws. This will make it easier to adjust the screws. 2 1 4.Open both doors again and check to make sure that they close easily. If not, slightly tilt the refrigerator further back by turning both leveling screws clockwise. It may take several more turns. Make sure that you turn both leveling screws the same amount. 5. Ensure that the refrigerator is even by using a level. 6.Replace the base grille. NOTE: Your new refrigerator is uniquely designed with two fresh food doors. Either door can be opened or closed independently of one another. You may have to exert slight pressure on doors to get them to close completely. 14