LG LFC25765ST Owner's Manual - Page 10

REFRIGERATOR INSTALLATION TOOLS YOU MAY NEED 10 mm 1/4 in 3/8 in Hex Socket Wrench Phillips Screwdriver Flat Head Screwdriver 1/4 in 3/32 in Allen Wrench NOTE: It is always recommended that the doors be removed when it is necessary to move the refrigerator through a narrow opening. If it is necessary to remove the handles follow the directions below. NOTE: Handle appearance may vary from illustrations on this page. DOOR HANDLE REMOVING 1. Removing Refrigerator Handle Loosen the set screws with the 3/32 " Allen wrench and remove the handle. • NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4 " Allen wrench. DOOR HANDLE INSTALLATION 1. Reinstalling Refrigerator Handle Place the handle on the door by aligning handle footprints to fit mounting fasteners and tighten the set screws with a 3/32 " Allen wrench. NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4 " Allen wrench. Mounting Fasteners Set Screw Mounting Fasteners Allen Wrench 2. Removing Freezer Drawer Handle Loosen the set screws located on the lower side of the handle with the 1/8" Allen wrench and remove the handle. NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4 " Allen wrench. 2. Reinstalling Freezer Drawer Handle Place the handle on the door by aligning handle footprints to fit mounting fasteners and tighten the set screws on the bottom of the handle with a 1/8" Allen wrench. NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4 " Allen wrench. 9