LG LFC25765ST Owner's Manual - Page 19

USING YOUR REFRIGERATOR Sliding Shelves (in some models) You can slide some of the shelves in your refrigerator towards inside or outside like explained below. • To slide the shelf towards the outside: Pull towards you, figure A. • To slide the shelf towards the inside: Push until it stops, figure B. CRISPER HUMIDITY CONTROL (in some models) You can control the amount of humidity in the moisturesealed crispers. Adjust the control to any setting between HIGH and LOW. • "High": keeps moist air in the crisper for best storage of vegetables. • "Low": lets moist aire out of the crisper for best storage of fruits. Figure A Figure B I I I I I I I In order to remove a shelf from a metal frame • Pull the shelf until it stops. • Incline the front of the shelf towards the top and pull forward. • Lift the shelf in the manner it moves across the support openings. To put back into place just reverse these steps. To remove the crisper: • Slide crisper straight out to the stop. • Lift the front of the crisper, then pull it out to remove • Replace the crisper by sliding it back in fully past the drawer stop. Functional Shelves (Folding Shelves, in some models) You can store tall articles like gallons or bottles just by simply folding the shelf in half. CAUTION: Be careful when you handle the glass cover because it could loose. To remove the glass: • Lift up the glass after inserting a screwdriver under the crisper cover. • Pull glass cover up and out. PANTRY (in some models) For storage of meat or fresh food. Adjust the control to desired temperature by moving from COLD to COLDER. Pull forward to open. Lift slightly and pull it out to remove. To remove the crisper cover support: NOTE: Remove glass before removing the crisper cover support. • While holding the crisper cover support with both hands (as shown in the image below). Pull forward and slightly lift the front part. l 18