LG LG840 Owner's Manual - Page 27

Getting Started with Your Phone Getting Started with Your Phone The Battery Note It is important to fully charge the battery before initial use of the phone. The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen. Installing the Battery Insert the bottom of the battery into the opening on the back of the phone, then push the battery down until it snaps into place. Removing the Battery Charging the Battery Your Spyder II device comes with a cableless travel adapter and a USB data cable which are connected together to charge your phone. To charge your phone: Note Please use only an approved charging accessory to charge your LG phone. Improper handling of the charging port, as well as the use of an incompatible charger, may cause damage to your phone and void the warranty. 1. Connect the cableless wall adapter and USB data cable. When connecting as shown below, the LG logo on the USB cable should face toward you. Turn power off. Slide the battery cover up, then pull the bottom side of the battery up to remove it. 25