LG LP1010SNR Owner's Manual - Page 15

INSTALLATION INSTRUCTIONS INSTALLATION IN VERTICAL SLIDING WINDOWS NOTE: The window installation kit can be used with vertical sliding windows between 18" and 48" wide. Foam seal C (Adhesive type-shorter) Foam seal A (Adhesive type) Extension panel (if required) Vent Panel 1 Cut the foam seal A(adhesive type) & C(adhesive type-shorter) to the proper length, and attach it to the window sash and frame. 2 Insert the vent panel assembly, including extension panels, if needed, into the window opening. Extend the extension panels, if used. Type B screws Foam seal B (Non-adhesive type) English 3 Carefully lower the window. Secure the vent panel in place with 4 type B screws, plus one screw for each extension: Vent panel only: 4 type B screws Vent panel and one extension: 5 type B screws Vent panel and two extensions: 6 type B screws Two vent panels and two extensions: 9 type B screws 15 4 Cut the foam seal B(Non-adhesive type) to the window width. Stuff the foam seal B between the glass and the window to prevent air and insects from getting into the room.