LG LP1010SNR Owner's Manual - Page 8

HOW TO USE BEFORE USING YOUR AIR CONDITIONER PREPARING FOR OPERATION Refer to the Installation Instructions included in this manual before using the air conditioner. Once the air conditioner has been properly assembled and installed: 1 Plug the power cord into its own dedicated properly grounded outlet. Do not plug ot her appliances into the same outlet; it could overload the outlet and create a fire hazard. 2 Make sure the air conditioner and cord is positioned where it does not create a tripping hazard and will receive adequate ventilation. Do not place it directly next to furniture or objects that could block the vent openings. 3 Make sure that any items that could be blown over or damaged by the airflow from the fan are out of the airflow path. UNPACKING THE AIR CONDITIONER Remove and store packing materials for reuse. Remove any shipping tape before using the air conditioner. If the tape leaves behind any adhesive, rub a small amount of liquid dish soap onto it and wipe with a damp cloth. Do NOT use sharp instruments, alcohol, thinners, or abrasive cleaners to remove adhesive. They could damage the finish. IMPORTANT: • Do not remain in the direct airflow from the air conditioner for extended periods of time. • To prevent damage or injury to pets and plants, make sure they are not exposed to direct airflow from the air conditioner. • When used at the same time as stoves, fireplaces, and other combustion devices, make sure there is a sufficient flow of fresh air into the room. Do not use in tightly enclosed spaces with these types of devices. • This air conditioner is intended for household use as a consumer comfort appliance. Do not use it as a precision climate control system, or for purposes such as cooling precision equipment, food, pets, plants, artwork, etc. Such items could be damaged. • Do not bend the hose downward when window installation kit is not applied. It may cause failure of air conditioner or performance deterioration.