LG LRFD25850ST User Guide - Page 11

Removing, Replacing, Refrigerator, Doors - door latch

Page 11 highlights

REMOVING AND REPLACING REFRIGERATOR DOORS 1. Removing Refrigerator Door A, CAUTION: Before you begin, unplug the refrigerator. Remove food and bins from doors. • Left Door 1. Disconnect water supply tube by pushing back on the disconnect ring (4). 2. Open door. Loosen top hinge cover screw (1). Use flat tip screwdriver to pry back hooks on front underside of cover (3). Lift up cover. 3. Disconnect door switch wire harness (2). Remove cover. 4. Attach the tube on the door with door. 5. Pull out the tube. 6. Disconnect the three wire harnesses (5). Remove the grounding screw (6). 7. Rotate hinge lever (7) counterclockwise and remove. Lift top hinge (8) free of hinge lever latch (9). A, CAUTION: When lifting hinge free of latch, be careful that door does not fall forward. 8. Lift door up from middle hinge pin (10) and remove door. 9. Place door, inside facing up, down onto a non-scratching surface. • Right Door 1. Open door. Loosen top hinge cover screw (1). Lift up cover (3). 2. Disconnect door switch wire harness (2). Remove cover. 3. Disconnect wire harness (5). Remove the grounding screw (6). 4. Rotate hinge lever (7) clockwise and remove. Lift top hinge (8) free of hinge lever latch (9). _, CAUTION: When lifting hinge free of latch, be careful that door does not fall forward. 5. Lift door up from middle hinge pin (10) and remove door. 6. Place door, inside facing up, down onto a non-scratching surface. \ 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

REMOVING
AND
REPLACING
REFRIGERATOR
DOORS
1. Removing
Refrigerator
Door
A,
CAUTION:
Before you begin, unplug the refrigerator. Remove food and bins from doors.
Left Door
1. Disconnect water supply tube by pushing back on the disconnect ring (4).
2. Open door. Loosen top hinge cover screw (1).
Use flat tip screwdriver to pry back hooks on front underside of cover (3). Lift up cover.
3. Disconnect door switch wire harness (2). Remove cover.
4. Attach the tube on the door with door.
5. Pull out the tube.
6. Disconnect the three wire harnesses (5). Remove the grounding screw (6).
7. Rotate hinge lever (7) counterclockwise
and remove. Lift top hinge (8) free of hinge lever latch (9).
A,
CAUTION:
When lifting hinge free of latch, be careful that door does not fall forward.
8. Lift door up from middle
hinge pin (10) and remove door.
9. Place door, inside facing up, down onto a non-scratching
surface.
Right
Door
1. Open door. Loosen top hinge cover screw (1). Lift up cover (3).
2. Disconnect door switch wire harness (2). Remove cover.
3. Disconnect wire harness (5). Remove the grounding screw (6).
4. Rotate hinge lever (7) clockwise
and remove. Lift top hinge (8) free of hinge lever latch (9).
_, CAUTION:
When lifting hinge free of latch, be careful that door does not fall forward.
5. Lift door up from middle
hinge pin (10) and remove door.
6. Place door, inside facing up, down onto a non-scratching
surface.
\
11