LG M3202C-BA-US Owner's Manual (English)

LG M3202C-BA-US - LG - 32" LCD Flat Panel Display Manual

Get LG M3202C-BA-US - LG - 32inch LCD Flat Panel Display PDF manuals and user guides
UPC - 719192184787
View all LG M3202C-BA-US manuals
Add to My Manuals
Save this manual to your list of manuals

LG M3202C-BA-US manual content summary:

  • LG M3202C-BA-US | Owner's Manual (English) - Page 1
    User's Guide M3202C M3702C Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service.
  • LG M3202C-BA-US | Owner's Manual (English) - Page 2
    if the following parts are all present. Screws (6) Stand (1) Stand Cover(1) 2. Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture. 3. Use the screws to secure the stand on the rear side of the product as shown
  • LG M3202C-BA-US | Owner's Manual (English) - Page 3
    cover - Only on some models. 1. Disassemble the stand cover. The cover may be easily disassembled by pressing up on the base as shown in the figure. Stand cover 2. After connecting the cables, correctly position the stand cover into the holes on the stand. If securely connected, you will hear the
  • LG M3202C-BA-US | Owner's Manual (English) - Page 4
    Connecting the Speakers - Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. Type 1 When the speaker is installed. *Connect the input terminal with a proper color match. 3
  • LG M3202C-BA-US | Owner's Manual (English) - Page 5
    - Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. Type 2 After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available in
  • LG M3202C-BA-US | Owner's Manual (English) - Page 6
    To install Portrait - Only M3202C "When installing Portrait, rotate it clockwise based on its front." 5
  • LG M3202C-BA-US | Owner's Manual (English) - Page 7
    Using the Remote Control Name of the Remote Control Buttons • AV Button • appropriate time duration • PSM Button - Toggles through preset video settings. There is not a function which is supported • Menu Button • UP and Down buttons Bring up and down direction adjustment. • Mute button 123 456
  • LG M3202C-BA-US | Owner's Manual (English) - Page 8
    in the user's guide could be the PC sound card. AV Ports Speaker Ports *LINE OUT A terminal used to connect to the speaker including a built-in amplifier (Amp Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using
  • LG M3202C-BA-US | Owner's Manual (English) - Page 9
    since an incompatible adapter is available in the market. (Different signaling system) B (not included) Rear side of the product. PC * User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product. Connect the
  • LG M3202C-BA-US | Owner's Manual (English) - Page 10
    . Connect the signal cables (HDMI to DVI and D-Sub) to each computer. Press the INPUT button on the remote control to select the computer to use. • Directly connect to a grounded power outlet or power strip (three prong connector.) 9
  • LG M3202C-BA-US | Owner's Manual (English) - Page 11
    Connecting to External Devices Daisy Chain Monitors Use this function when displaying ANALOG RGB inputs of a PC to the other product. • To use different products connected to each other Connect one end of the signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT connector of
  • LG M3202C-BA-US | Owner's Manual (English) - Page 12
    Connecting to External Devices VESA FDMI wall Mounting This product supports a VESA FDMI compliant mounting interface. These mounts are purchaed separately and not available from LG. Refer to the instructions included with hte mount for more info. The Set is equipped with a kensington Securify
  • LG M3202C-BA-US | Owner's Manual (English) - Page 13
    456 789 0 • Input Select Button If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. Input AV Component1 Component2 RGB PC HDMI/DVI * Inserting batteries into remote control. AAA Type 1. Slide off the battery cover
  • LG M3202C-BA-US | Owner's Manual (English) - Page 14
    Connecting to External Devices Video Input Connect the video cable as shown in the below figure and then connect the power cord (See page 8). A When connecting with a BNC cable. • Connect the input terminal with a proper color match. B When connecting with a S-Video cable. • Connect to the S-
  • LG M3202C-BA-US | Owner's Manual (English) - Page 15
    Cable (not included) (not included) HDTV Receiver HDTV Receiver Note - Some devices may require HDCP in order to display HD signals. - Component doesn't support HDCP. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SET Or, press the INPUT
  • LG M3202C-BA-US | Owner's Manual (English) - Page 16
    HDMI Input (480p/576p/720p/1080i/1080p) -HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content included) VCR/DVD/Set-top Box VCR/DVD/Set-top Box Note : Dolby Digital is not supported. Select an input signal. Press the INPUT button on the remote control to select the input
  • LG M3202C-BA-US | Owner's Manual (English) - Page 17
    Connecting to External Devices Watching AV Outputs - When using AV input, you can connect the AV Out to other monitors. Video/TV BNC Cable (not included) Audio Cable (not included) IN Product OUT BNC Cable (not included) Audio Cable (not included) Video/TV Note • When
  • LG M3202C-BA-US | Owner's Manual (English) - Page 18
    User Menus Screen Adjustment options INPUT AUTO/SET Power Button • Press mode, this indicator color changes to amber. MENU Button • Use this button to show/hide the OSD (On Screen Display) menu screen. OSD Select / Adjust Button • Use this button to select an icon or adjust the setting in
  • LG M3202C-BA-US | Owner's Manual (English) - Page 19
    User Menus Screen Adjustment options AUTO/SET Button [For PC Analog signal] [When XGA Mode is active and 1360 X768 is selected] INPUT Button INPUT AUTO/
  • LG M3202C-BA-US | Owner's Manual (English) - Page 20
    User Menus OSD Menu Icon Function Description Picture Audio Time Option Information Adjusts screen brightness, contrast and color that you prefer. Adjusts the audio options. Adjusts
  • LG M3202C-BA-US | Owner's Manual (English) - Page 21
    User Menus How to adjust the OSD (On Screen Display) screen Pops up the menu screen Move where you want to adjust Select a menu icon Move where you want to adjust Select a Adjust the status menu icon Save Exit from the adjustment menu screen. • Use the remote control to adjust the OSD
  • LG M3202C-BA-US | Owner's Manual (English) - Page 22
    User1,2 : Select this option to use the user-defined settings. User2 Backlight 20 Contrast 90 Brightness 50 Color 50 Sharpness 50 Tint 50 Expert MENU Backlight : To control the brightness of the screen,adjust the brightness of LCD
  • LG M3202C-BA-US | Owner's Manual (English) - Page 23
    Aspect Ratio Picture Reset Screen Cool Medium Warm User MENU Color Settings • Cool : Slightly purplish white. • Medium : Slightly bluish white. • Warm : Slightly reddish white. • User : Select this option to use the user-defined settings. User Red 0 Green 0 Blue 0 MENU Red / Green / Blue
  • LG M3202C-BA-US | Owner's Manual (English) - Page 24
    User Menus Adjusting Screen Color Advanced Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen To set MENU • Gamma : Set your own gamma value. : -50/0/50 On the monitor adjusts the contrast and the brightness of the screen using the black level of the screen. • Low
  • LG M3202C-BA-US | Owner's Manual (English) - Page 25
    User Menus Adjusting Screen Color Aspect Ratio To select the image size of the the program being watched. This picture format is 4:3 aspect ratio. The aspect ratio is not adjusted from the original. Used in PC mode. (Only HDMI/ DVI PC, RGB PC) 14:9 programs are viewed normally in 14:9 with black
  • LG M3202C-BA-US | Owner's Manual (English) - Page 26
    User Menus Adjusting Screen Color Picture Reset Return Picture Mode, Color Temperature, Advanced to the default -PC only). : For more improved or better picture quality, select the same mode corresponding to computer resolution. Reset: Return Manual config. to the default factory settings. 25
  • LG M3202C-BA-US | Owner's Manual (English) - Page 27
    audio settings. User 0.1 0.5 1.5 5.0 10 KHz MENU Auto To adjust uneven sound volumes across all channels or signals automatically to the most Volume appropriate level. To use this feature, select On. Balance Use this function to balance sound from the left and right speakers. Speaker You can
  • LG M3202C-BA-US | Owner's Manual (English) - Page 28
    User Menus Adjusting the timer function Time Clock On/Off Timer Sleep Time Auto Sleep Power On Delay _ _ : _ _ AM MENU Clock If the current time is incorrect, reset the clock manually. 1) Press the MENU button and then use button to select the Time menu. 2) Press the button and then use button
  • LG M3202C-BA-US | Owner's Manual (English) - Page 29
    User Menus Selecting the options Language Key Lock ISM Method Option Language Key Lock ISM Method Power Indicator Logo Light DPM Select Tile Mode Factory Reset MENU To set To choose the language in which the control names are displayed. Use the buttons to select On or Off. The monitor problem.
  • LG M3202C-BA-US | Owner's Manual (English) - Page 30
    User Menus Selecting the options • To use this function - Must be displayed with various other Factory Reset MENU Tile Mode H-Size V-Size H-Position V-Position Reset Tile ID Natural It is used to enlarge the screen and Off also used with several products to 0 view screen. 0 < > < > 1 Off • Tile
  • LG M3202C-BA-US | Owner's Manual (English) - Page 31
    User Menus Selecting the options - Tile mode (product 1 ~ 9) : r(3) x c(3) row ID 1 ID 2 ID 4 ID 5 ID 7 ID 8 - Tile mode (product 1 ~ 2) : r(2) x c(1) row ID 1 ID 3 ID 6 column ID 9 ID 2 column -
  • LG M3202C-BA-US | Owner's Manual (English) - Page 32
    User Menus Selecting the options Tile mode Option Language Key Lock ISM Method Power Indicator Logo Light DPM Select Tile Mode Factory Reset MENU Tile Mode
  • LG M3202C-BA-US | Owner's Manual (English) - Page 33
    User Menus Adjust Set ID and check Serial No. and SW version. Information Set ID Serial No. SW Version Set ID Serial No. SW Version MENU You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1~99) using the
  • LG M3202C-BA-US | Owner's Manual (English) - Page 34
    by referring to the Specifications in this manual. * Maximum resolution RGB : 1600 driver? • Install the product driver, which is provided with the product, or download it from the web site. (http://www.lge.com) • See if the plug&play function is supported by referring to the video card user manual
  • LG M3202C-BA-US | Owner's Manual (English) - Page 35
    the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended
  • LG M3202C-BA-US | Owner's Manual (English) - Page 36
    Troubleshooting The audio function does not work. the volume. Screen color is abnormal. G Screen has poor color resolution (16 colors). • Set the number of colors to more than 24 bits (true color) Select Control Panel the unique characteristics of the LCD panel. It is not a malfunction of the
  • LG M3202C-BA-US | Owner's Manual (English) - Page 37
    The product specifications can change without prior notice for product improvement. M3202C LCD Panel Power 32 inches Visible diagonal (80.0 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel 0.5025 mm X 0.5025 mm (Pixel Pitch) Rated Voltage Power Consumption AC 100-240V
  • LG M3202C-BA-US | Owner's Manual (English) - Page 38
    The product specifications can change without prior notice for product improvement. M3702C LCD Panel Power 37 inches Visible diagonal (94.0 cm)TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel 0.6000 mm X 0.6000 mm (Pixel Pitch) Rated Voltage Power Consumption AC 100-240V
  • LG M3202C-BA-US | Owner's Manual (English) - Page 39
    product specifications can change without prior notice for product improvement. Video Signal Input Connector Environmental Conditions Max. Resolution RGB : 1600 X 1200 @60Hz HDMI/DVI : 1920 X 1080 @60Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB
  • LG M3202C-BA-US | Owner's Manual (English) - Page 40
    Specifications PC Mode - Preset Mode Preset mode 1 640 x 350 2 720 x 400 *3 640 x 480 4 640 x 480 *5 800 x 600 6 800 x 600 7 832 x 624 *8 Mode Product Green Amber - NOTE DTV/PC selection on HDMI/DVI inputs is available for PC resolutions : 640 X 480/60Hz, 1280 X 720/60Hz and DTV
  • LG M3202C-BA-US | Owner's Manual (English) - Page 41
    cable as shown in the picture. * The RS-232C protocol is used for communication between the PC and product. You can turn the product from your PC. RS-232C Cable (not included) PC monitor 1 monitor 2 monitor 3 monitor 4 RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) PC
  • LG M3202C-BA-US | Owner's Manual (English) - Page 42
    24. Natural Mode (In Tilemode) 25. Elapsed time return 26. Temperature value 27. Lamp fault check 28. Auto Volume 29. Speaker 30. Time 31. On Timer (On/Off Timer) On, Off 32. Off Timer (On/Off Timer) On, Off 33. On Timer (On/Off Timer) Time 34. Off Timer (On/Off Timer
  • LG M3202C-BA-US | Owner's Manual (English) - Page 43
    (k) * [Command 2]: Second command.(a ~ u) * [Set ID]: Set up the Set ID number of product. range : 1~99. by setting '0', server can control all products. * In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the
  • LG M3202C-BA-US | Owner's Manual (English) - Page 44
    L 02. Input Select (Command : b) (Main Picture Input) To select input source for the Set. You can also select an input source using the INPUT button on the remote control. Transmission [k][b][ ][Set ID][ ][Data][Cr] Data 2 : AV 4 : Component 1 5 : Component 2 7 : RGB (PC) 8 : HDMI (DTV) 9 : HDMI
  • LG M3202C-BA-US | Owner's Manual (English) - Page 45
    Transmission / Receiving Protocol 03. Aspect Ratio(Command : c) (Main picture format) To adjust the screen format. You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 1 : Normal
  • LG M3202C-BA-US | Owner's Manual (English) - Page 46
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 05. Volume Mute(Command : e) To control On/Off of the Volume Mute. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On) Acknowledgement [e][ ][Set ID][ ][OK][
  • LG M3202C-BA-US | Owner's Manual (English) - Page 47
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 07. Contrast(Command : g) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H • Refer to 'Real data mapping' as shown
  • LG M3202C-BA-US | Owner's Manual (English) - Page 48
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 09. Color(Command : i) (Video only) To adjust the screen color. You can also adjust the color in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal code) • Refer to '
  • LG M3202C-BA-US | Owner's Manual (English) - Page 49
    RS-232C Controlling the Multiple Product Transmission / Receiving Protocol L 11. Sharpness(Command : k) (Video only) To adjust the screen Sharpness. You can also adjust the sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal code) •
  • LG M3202C-BA-US | Owner's Manual (English) - Page 50
    : 00H ~ Max : 64H * Balance : L50 ~ R50 15. Color Temperature (Command : u) To adjust the screen color temperature. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0 : Medium 1 : Cool 2 : Warm 3 : User Acknowledgement [u][ ][Set ID][ ][OK][Data][x] Data 0 : Medium 1 : Cool 2 : Warm
  • LG M3202C-BA-US | Owner's Manual (English) - Page 51
    (Command : z) Abnormal State : Used to Read the power off status when Stand-by mode. Transmission [k][z][ ][Set monitor off by remote control 3 : Turn the monitor off by sleep time function 4 : Turn the monitor off by RS-232C function 8 : Turn the monitor off by off time function 9 : Turn the monitor
  • LG M3202C-BA-US | Owner's Manual (English) - Page 52
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 18. Auto Configure(Command: j u) To adjust picture position and minimize image shaking automatically. it works only in RGB(PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1 : To set Acknowledgement [u][ ][Set
  • LG M3202C-BA-US | Owner's Manual (English) - Page 53
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 20. Tile Mode(Command : d d) Change a Tile Mode. Transmission [d][d][][Set ID][][Data][x] Data 00 12 13 14 ... 55 Description Tile mode is off. 1 x 2 mode(column x row) 1 x 3 mode 1 x 4 mode ... 5 x 5 mode * The data
  • LG M3202C-BA-US | Owner's Manual (English) - Page 54
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 21. Tile H Size(Command : d g) To set the Horizontal size. Transmission [d][g][][Set ID][][Data][x] Data Min : 00H ~ Max : 64H Acknowledgement [g][][Set ID][][OK/NG][Data][x] 22. Tile V Size(Command : d h) To set the
  • LG M3202C-BA-US | Owner's Manual (English) - Page 55
    : d l) To read the elapsed time. Transmission [d][l][][Set ID][][Data][x] * The data is always FF(in Hex). Acknowledgement [l][][Set ID][][OK/NG][Data][x] * The data means used hours. (Hexadecimal code) A15 L
  • LG M3202C-BA-US | Owner's Manual (English) - Page 56
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 26. Temperature value (Command : d n) To read the inside temperature value. Transmission [d][n][][Set ID][][Data][x] * The data is always FF(in Hex). Acknowledgement [n][][Set ID][][OK/NG][Data][x] * The data is 1 byte
  • LG M3202C-BA-US | Owner's Manual (English) - Page 57
    the volume level. Transmission [d][u][][Set ID][][Data][x] Data 0 : Off 1 : On Acknowledgement [u][][Set ID][][OK/NG][Data][x] 29. Speaker (Command : d v) Turn the speaker on or off. Transmission [d][v][][Set ID][][Data][x] Data 0 : Off 1 : On Acknowledgement [v][][Set ID][][OK/NG][Data][x] A17
  • LG M3202C-BA-US | Owner's Manual (English) - Page 58
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 30. Time (Command : f a) Set the current time. Transmission [f][a][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 : Monday 1: Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday [Data2] 0H~17H (Hours)
  • LG M3202C-BA-US | Owner's Manual (English) - Page 59
    On Timer On(1), Off(0) bit6 :Sunday On Timer On(1), Off(0) bit7 : Everyday On Timer On(1), Off(0) Acknowledgement [b][][Set ID][][OK/NG][Data1][Data2][x] 32. Off Timer (On/Off Timer) On, Off (Command : f c) Set days for Off Timer. Transmission [f][c][][Set ID][][Data1][][Data2][Cr] [Data1] 0 (Write
  • LG M3202C-BA-US | Owner's Manual (English) - Page 60
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 33. On Timer (On/Off Timer) Time (Command : f d) Set On Timer. Transmission [f][d][][Set ID][][Data1][][Data2][Data3][Cr] [Data1] 0 : Monday 1: Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 :
  • LG M3202C-BA-US | Owner's Manual (English) - Page 61
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 34. Off Timer (On/Off Timer) Time (Command : f e) Set Off Timer. Transmission [f][e][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 : Monday 1: Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 :
  • LG M3202C-BA-US | Owner's Manual (English) - Page 62
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 35. Sleep Time (Command : f f) Set Sleep Time. Transmission [f][f][][Set ID][][Data][Cr] Data 0 : Off 1 : 10 2 : 20 3 : 30 4 : 60 5 : 90 6 : 120 7 : 180 8 : 240 (Orderly) Acknowledgement [f][][Set ID][][OK/NG][Data][x] 36.
  • LG M3202C-BA-US | Owner's Manual (English) - Page 63
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 37. Power On Delay (Command : f h) Set the schedule delay when the power is turned on (Unit: second). Transmission [f][h][][Set ID][][Data][Cr] Data : 00H ~ 64H (Data value) Acknowledgement [h][][Set ID][][OK/NG][Data
  • LG M3202C-BA-US | Owner's Manual (English) - Page 64
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 39. DPM Select (Command : f j) Set the DPM (Display Power Management) function. Transmission [f][j][][Set ID][][Data][Cr] Data 0 : Off 1: On Acknowledgement [j][][Set ID][][OK/NG][Data][x] 40. Reset (Command : f k)
  • LG M3202C-BA-US | Owner's Manual (English) - Page 65
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 41. S/W Version (Command : f z) Check the software version. Transmission [f][z][][Set ID][][Data][Cr] Data FFH : Read Acknowledgement [z][][Set ID][][OK/NG][Data][x] 42. Input Select (Command : x b) To select input
  • LG M3202C-BA-US | Owner's Manual (English) - Page 66
    .917KHz signal at 455KHz Tc Carrier frequency FCAR = 1/Tc = fosc/12 T1 Duty ratio = T1/Tc = 1/3 Configuration of frame • 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2
  • LG M3202C-BA-US | Owner's Manual (English) - Page 67
    ( ) VOL( ) POWER ON/OFF POWER ON POWER OFF MUTE AV INPUT SLEEP MENU EXIT PSM SET Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 AV COMPONENT1 COMPONENT2 RGB PC HDMI/DVI ARC ARC (4:3) ARC (16:9) ARC (ZOOM) AUTO CONFIC
  • LG M3202C-BA-US | Owner's Manual (English) - Page 68
    P/NO : 3840TRL098E (0801-REV00)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
M
ake sure to read the
Safety Precautions
before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
S
ee the label attached on the product and give the information to your dealer when you ask
for service.
M3202C
M3702C
User’s Guide