LG M3702C-BA User Manual

LG M3702C-BA Manual

Get LG M3702C-BA PDF manuals and user guides View all LG M3702C-BA manuals
Add to My Manuals
Save this manual to your list of manuals

LG M3702C-BA manual content summary:

  • LG M3702C-BA | User Manual - Page 1
    User's Guide M3202C M3702C Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service.
  • LG M3702C-BA | User Manual - Page 2
    as shown in the picture. Parts First, check if the following parts are all present. Screws (6) Stand (1) Stand Cover(1) 2. Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture. 3. Use the screws to secure the
  • LG M3702C-BA | User Manual - Page 3
    cover - Only on some models. 1. Disassemble the stand cover. The cover may be easily disassembled by pressing up on the base as shown in the figure. Stand cover 2. After connecting the cables, correctly position the stand cover into the holes on the stand. If securely connected, you will hear the
  • LG M3702C-BA | User Manual - Page 4
    Connecting the Speakers - Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. Type 1 When the speaker is installed. 3
  • LG M3702C-BA | User Manual - Page 5
    - Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. Type 2 After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available in
  • LG M3702C-BA | User Manual - Page 6
    Using the Remote Control Name of the Remote Control Buttons • AV Button • Sleep Button When watching AV, duration • PSM Button - Toggles through preset video settings. There is not a function which is supported • Menu Button • UP and Down buttons Bring up and down direction adjustment. • Mute button
  • LG M3702C-BA | User Manual - Page 7
    the user's guide could be different from the actual image. Rear View AV IN/OUT Power Connector : Connect the power cord Wired Remote Control Port RS-232C Serial Ports RGB, HDMI/DVI Ports PC Sound Jack : Connect the audio cable to the *LINE OUT jack of the PC sound card. AV Ports Speaker Ports *LINE
  • LG M3702C-BA | User Manual - Page 8
    not included) Rear side of the product. PC * User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product. Connect the Audio cable. Rear side of the product. Connect the power cord. PC Rear side of the product
  • LG M3702C-BA | User Manual - Page 9
    AV Component1 Component2 RGB PC HDMI/DVI Note • How to connect to two computers. Connect the signal cables (HDMI to DVI and D-Sub) to each computer. Press the INPUT button on the remote control to select the computer to use. • Directly connect to a grounded power outlet or power strip (three prong
  • LG M3702C-BA | User Manual - Page 10
    Connecting to External Devices Daisy Chain Monitors Use this function when displaying ANALOG RGB inputs of a PC to the other product. • To use different products connected to each other Connect one end of the signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and
  • LG M3702C-BA | User Manual - Page 11
    wall Mounting This product supports a VESA FDMI compliant mounting interface. These mounts are purchaed separately and not available from LG. Refer to the instructions included with hte mount for more info. The Set is equipped with a kensington Securify System connector on the back panel. The cable
  • LG M3702C-BA | User Manual - Page 12
    will appear. Select the signal type you want using the button. Input AV Component1 Component2 RGB PC HDMI/DVI * Inserting batteries into remote control. AAA Type 1. Slide off the battery cover. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cover. • Dispose of used
  • LG M3702C-BA | User Manual - Page 13
    movies. Product IN OUT Product IN OUT Audio Cable (not included) BNC Cable (not included) Audio Cable (not included) S-Video Cable (not included) VCR/DVD Receiver VCR/DVD Receiver Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SET
  • LG M3702C-BA | User Manual - Page 14
    ) (not included) BNC Cable Audio Cable (not included) (not included) HDTV Receiver HDTV Receiver Note - Some devices may require HDCP in order to display HD signals. - Component doesn't support HDCP. Select an input signal. Press the INPUT button on the remote control to select the input signal
  • LG M3702C-BA | User Manual - Page 15
    Product Product HDMI to DVI Signal Cable (not included) RCA-PC Audio Cable HDMI Signal Cable (not included) VCR/DVD/Set-top Box VCR/DVD/Set-top Box Note : Dolby Digital is not supported. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT
  • LG M3702C-BA | User Manual - Page 16
    Watching AV Outputs - When using AV input, you can connect the AV Out to other monitors. Video/TV BNC Cable (not included) Audio Cable (not included) IN Product OUT BNC Cable (not included) Audio Cable (not included) Video/TV Note • When multi-connecting in/out cascade format, no loss
  • LG M3702C-BA | User Manual - Page 17
    User Menus Screen Adjustment options INPUT AUTO/SET Power Button • Press this button to turn on the power. Press this button again to turn it off. Power Indicator • This Indicator lights up green when the display operates normally (on mode). If the display is in sleep (Energy Saving) mode,
  • LG M3702C-BA | User Manual - Page 18
    PC Analog signal] Auto in progress For opimal display change resolution to 1360 X 768 [When XGA Mode is active HDTV, DVD HDTV, DVD 15-pin D-Sub analog signal Digital signal Input AV Component1 Component2 RGB PC HDMI/DVI IR Receiver • This is where the unit receives signals from the remote control
  • LG M3702C-BA | User Manual - Page 19
    User Menus OSD Menu Icon Function Description Picture Audio Time Option Information Adjusts screen brightness, contrast and color that you prefer. Adjusts the audio options. Adjusts the timer options. Adjusts the screen status according to the circumstances. Adjust Set ID and check Serial No.
  • LG M3702C-BA | User Manual - Page 20
    menu screen. • Use the remote control to adjust the OSD screen. 1 Press the MENU Button, menu of the OSD appears. 2 To access a control, use the Buttons. 3 When the icon you want Press the AUTO/SET button (AUTO button on a remote Control) in the PC analog signal. Then optimal screen settings
  • LG M3702C-BA | User Manual - Page 21
    . User2 Backlight 20 Contrast 90 Brightness 50 Color 50 Sharpness 50 Tint 50 Expert MENU Backlight : To control the brightness of the screen,adjust the brightness of LCD panel. Contrast : Adjust the difference between the light and dark levels in the picture. Brightness : To adjust
  • LG M3702C-BA | User Manual - Page 22
    User Menus Adjusting Screen Color Color Temperature Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen Cool Medium Warm User MENU Color Settings • Cool : Slightly purplish white. • Medium : Slightly bluish white. • Warm : Slightly reddish white. • User : Select
  • LG M3702C-BA | User Manual - Page 23
    Gamma : Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast 480i/576i) When you watch a movie, this function adjusts the set to the best picture appearance. • Black Level : (Function works in the following mode - AV
  • LG M3702C-BA | User Manual - Page 24
    Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen 16:9 Original 4:3 14:9 Zoom1 Zoom2 MENU 16:9 Just Scan Original 4:3 1:1 14:9 Zoom1, 2 Widescreen mode. Allows you to enjoy the transmitted data fully without any images cut off. (* This menu is activated only in 720p, 1080p
  • LG M3702C-BA | User Manual - Page 25
    Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen To set Screen Auto Config. Manual Config. XGA Mode Reset To set MENU MENU Auto Config. (RGB PC input the same mode corresponding to computer resolution. Reset: Return Manual config. to the default factory settings. 24
  • LG M3702C-BA | User Manual - Page 26
    User Menus Adjusting the audio function Sound Mode The best sound tone quality will be selected automatically depending on the video type that you're currently watching. Audio Sound Mode Auto Volume Balance Speaker MENU Clear Voice Standard Music Cinema Sport Game User • Clear Voice : By
  • LG M3702C-BA | User Manual - Page 27
    : _ _ AM MENU Clock If the current time is incorrect, reset the clock manually. 1) Press the MENU button and then use button to select the Time menu. 2) Off. Power On Delay When connecting multiple monitors and turning the power on, the monitors are turned on individually to prevent overload.
  • LG M3702C-BA | User Manual - Page 28
    control names are displayed. Use the buttons to select On or Off. The monitor can be set up so that it can only be used with the remote control don't foresee image burn in being a problem. White wash : White wash fills the prevent ghost images. However, it is best not to allow any fixed image to
  • LG M3702C-BA | User Manual - Page 29
    User Menus Selecting the options • To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RS-232C or RGB Out Tile mode Option Language Key Lock ISM Method Power Indicator Logo Light DPM Select Tile Mode Factory Reset MENU Tile Mode
  • LG M3702C-BA | User Manual - Page 30
    User Menus Selecting the options - Tile mode (product 1 ~ 9) : r(3) x c(3) row ID 1 ID 2 ID 4 ID 5 ID 7 ID 8 - Tile mode (product 1 ~ 2) : r(2) x c(1) row ID 1 ID 3 ID 6 column ID 9 ID 2 column - Tile mode (product 1 ~16) : r(4) x c(4) row ID 1 ID 2 ID 3 ID 5 ID 6 ID 7 ID 9
  • LG M3702C-BA | User Manual - Page 31
    User Menus Selecting the options Tile mode Option Language Key Lock ISM Method Power Indicator Logo Light DPM Select Tile Mode Factory Reset MENU Tile Mode Off H-Size 0 V-Size 0 H-Position < > V-Position < > Reset Tile ID 1 Natural Off • H-Size • V-Size • H-Position • V-Position •
  • LG M3702C-BA | User Manual - Page 32
    when several products are connected for display. Specify the number (1~99) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. This menu shows the serial number of the product. This menu shows the software version. 31
  • LG M3702C-BA | User Manual - Page 33
    to the Specifications in this manual. * Maximum resolution RGB : 1600 x 1200 @60Hz HDMI/DVI : 1920 x 1080 @60Hz G Does the 'Check signal cable' message • The signal cable between PC and product is not appear? connected. Check the signal cable. • Press the 'INPUT' menu in the remote Control to
  • LG M3702C-BA | User Manual - Page 34
    signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. • See if the video card resolution and frequency are supported by the product. If the frequency is
  • LG M3702C-BA | User Manual - Page 35
    Troubleshooting The audio function does not work. G No sound? • See if the audio cable is connected properly. • Adjust the volume. abnormal. G Screen has poor color resolution (16 colors). • Set the number of colors to more than 24 bits (true color) Select Control Panel - Display - Settings -
  • LG M3702C-BA | User Manual - Page 36
    The product specifications can change without prior notice for product improvement. M3202C LCD Panel Power 32 inches Visible diagonal (80.0 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel 0.5025 mm X 0.5025 mm (Pixel Pitch) Rated Voltage Power Consumption AC 100-240V
  • LG M3702C-BA | User Manual - Page 37
    The product specifications can change without prior notice for product improvement. M3702C LCD Panel Power 37 inches Visible diagonal (94.0 cm)TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel 0.6000 mm X 0.6000 mm (Pixel Pitch) Rated Voltage Power Consumption AC 100-240V
  • LG M3702C-BA | User Manual - Page 38
    product specifications can change without prior notice for product improvement. Video Signal Input Connector Environmental Conditions Max. Resolution RGB : 1600 X 1200 @60Hz HDMI/DVI : 1920 X 1080 @60Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB
  • LG M3702C-BA | User Manual - Page 39
    Specifications PC Mode - Preset Mode Preset mode 1 640 x 350 2 720 x 400 *3 640 x 480 4 640 x 480 *5 800 x 600 6 800 x 600 7 832 x 624 *8 1024 x 768 9 1024 x 768 *10 1280 x 720 Horizontal Frequency (kHz) 31.469 31.468 31.469 37.5 37.879 46.875 49.725 48.363 60.123 44.772
  • LG M3702C-BA | User Manual - Page 40
    CTS 8 Monitor 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 (Female) D-Sub 9 (Female) LLLL LLL Communication Parameter Baud Rate : 9600buadRate (UART) Data Length : 8bits Parity Bit : None Stop Bit : 1bit Flow Control : None Communication Code : ASCII code Use a crossed (reverse) cable A1
  • LG M3702C-BA | User Manual - Page 41
    Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote . Auto Volume 29. Speaker 30. Time 31. On Off Timer) Time 34. Off Timer (On/Off Timer) Time 35. Sleep Time 36. Auto Sleep 37. Power On Delay 38. Language 39. DPM Select 40. Reset 41. S/W Version 42. Input
  • LG M3702C-BA | User Manual - Page 42
    Cr] * [Command 1]: First command. (k) * [Command 2]: Second command.(a ~ u) * [Set ID]: Set up the Set ID number of product. range : 1~99. by setting '0', server can control all products. * In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the
  • LG M3702C-BA | User Manual - Page 43
    Input) To select input source for the Set. You can also select an input source using the INPUT button on the remote control. Transmission [k][b][ ][Set ID][ ][Data][Cr] Data 2 : AV 4 : Component 1 5 : Component 2 7 : RGB (PC) 8 : HDMI (DTV) 9 : HDMI (PC) Acknowledgement [b][ ][Set ID][ ][OK][Data
  • LG M3702C-BA | User Manual - Page 44
    picture format) To adjust the screen format. You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 1 : Normal Screen (4:3) 2 : Wide Screen (16 :9) 4 : Zoom1 5 : Zoom2 6 : Original
  • LG M3702C-BA | User Manual - Page 45
    (Volume On) Acknowledgement [e][ ][Set ID][ ][OK][Data][x] Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On) 06. Volume Control(Command : f) To adjust Volume . Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal code) Acknowledgement [f][ ][Set ID
  • LG M3702C-BA | User Manual - Page 46
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 07. Contrast(Command : g) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission [k][g][ ][Set
  • LG M3702C-BA | User Manual - Page 47
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 09. Color(Command : i) (Video only) To adjust the screen color. You can also adjust the color in the Picture
  • LG M3702C-BA | User Manual - Page 48
    [l][ ][Set ID][ ][OK][Data][x] Data 0 : OSD Off 1 : OSD On L 13. Remote Lock /Key Lock (Command : m) To control Remote Lock on/off to the set. This function, when controlling RS-232C, locks the remote control and the local keys. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 0 : Off 1 : On
  • LG M3702C-BA | User Manual - Page 49
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 14 Balance(Command : t) To adjust the sound balance. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal
  • LG M3702C-BA | User Manual - Page 50
    the power off status when Stand-by mode. Transmission [k][z][ ][Set ID][ ][Data][Cr] Data FF : Read 0 : Normal (Power on and signal exist) 1: No signal (Power on) 2 : Turn the monitor off by remote control 3 : Turn the monitor off by sleep time function 4 : Turn the monitor off by RS-232C function
  • LG M3702C-BA | User Manual - Page 51
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 18. Auto : To set Acknowledgement [u][ ][Set ID][ ][OK][Data][x] 19. Key(Command : m c) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code : Refer to page A18. Acknowledgement [c][
  • LG M3702C-BA | User Manual - Page 52
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 20. Tile Mode(Command : d d) Change a Tile Mode. Transmission [d][d][][Set ID][][Data][x] Data 00 12 13 14 ... 55 Description Tile
  • LG M3702C-BA | User Manual - Page 53
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 21. Tile H Size(Command : d g) To set the Horizontal size. Transmission [d][g][][Set ID][][Data][x] Data Min : 00H ~ Max : 64H Acknowledgement [g][][
  • LG M3702C-BA | User Manual - Page 54
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 23. Tile ID Set(Command : d i) To assign the Tile ID for Tiling function . Transmission [d][i][][Set ID][][Data][x] Data Min :
  • LG M3702C-BA | User Manual - Page 55
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 26. Temperature value (Command : d n) To read the inside temperature value. Transmission [d][n][][Set ID][][Data][x] * The data is always FF(
  • LG M3702C-BA | User Manual - Page 56
    -232C Controlling the Multiple Product Transmission / Receiving Protocol 28. Auto volume (Command : d u) Automatically adjust the volume level. Transmission [d][u][][Set ID][][Data][x] Data 0 : Off 1 : On Acknowledgement [u][][Set ID][][OK/NG][Data][x] 29. Speaker (Command : d v) Turn the speaker on
  • LG M3702C-BA | User Manual - Page 57
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 30. Time (Command : f a) Set the current time. Transmission [f][a][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 : Monday 1: Tuesday 2 : Wednesday 3 : Thursday 4 :
  • LG M3702C-BA | User Manual - Page 58
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 31. On Timer (On/Off Timer) On, Off (Command : F b) Set days for On Timer. Transmission [f][b][][Set ID][][Data1][][Data2][
  • LG M3702C-BA | User Manual - Page 59
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 33. On Timer (On/Off Timer) Time (Command : f d) Set On Timer. Transmission [f][d][][Set ID][][Data1][][Data2][Data3][Cr] [Data1] 0 :
  • LG M3702C-BA | User Manual - Page 60
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 34. Off Timer (On/Off Timer) Time (Command : f e) Set Off Timer. Transmission [f][e][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 :
  • LG M3702C-BA | User Manual - Page 61
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 35. Sleep Time (Command : f f) Set Sleep Time. Transmission [f][f][][Set ID][][Data][Cr] Data 0 : Off 1 : 10 2 : 20 3 : 30 4 : 60 5 : 90 6 :
  • LG M3702C-BA | User Manual - Page 62
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 37. Power On Delay (Command : f h) Set the schedule delay when the power is turned on (Unit: second). Transmission [f][h][][Set ID][][Data][Cr] Data : 00H ~ 64H (Data
  • LG M3702C-BA | User Manual - Page 63
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 39. DPM Select (Command : f j) Set the DPM (Display Power Management) function. Transmission [f][j][][Set ID][][Data][Cr] Data 0 : Off 1: On
  • LG M3702C-BA | User Manual - Page 64
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 41. S/W Version (Command : f z) Check the software version. Transmission [f][z][][Set ID][][Data][Cr] Data FFH : Read Acknowledgement [z][][Set ID][][OK/
  • LG M3702C-BA | User Manual - Page 65
    RS-232C IR Codes L L L How to connect Connect your wired remote control to Remote Control port on the Product. Remote Control IR Code Output waveform single pulse, modulated with 37.917KHz signal at 455KHz Tc Carrier frequency FCAR = 1/Tc = fosc/12 T1 Duty ratio = T1/Tc = 1/3
  • LG M3702C-BA | User Manual - Page 66
    RS-232C IR Codes Code(Hexa) 00 01 02 03 08 C4 C5 09 98 0B 0E 43 5B 6E 44 10 11 12 13 14 15 16 17 18 19 5A BF D4 D5 C6 79 76 77 AF 99 L L Function L M VOL( ) VOL( ) POWER ON/OFF POWER ON POWER OFF MUTE AV INPUT SLEEP MENU EXIT PSM SET Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number
  • LG M3702C-BA | User Manual - Page 67
    P/NO : 3840TRL098E (0801-REV00)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
M
ake sure to read the
Safety Precautions
before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
S
ee the label attached on the product and give the information to your dealer when you ask
for service.
M3202C
M3702C
User’s Guide