LG M3703C-BA User Guide

LG M3703C-BA Manual

Get LG M3703C-BA PDF manuals and user guides View all LG M3703C-BA manuals
Add to My Manuals
Save this manual to your list of manuals

LG M3703C-BA manual content summary:

  • LG M3703C-BA | User Guide - Page 1
    User's Guide M3703C Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Temporary noise is normal when
  • LG M3703C-BA | User Guide - Page 2
    operate properly, unplug it and call authorized service center or PDI. Cleaning and Disinfection Clean the in accordance with the instructions, may cause harmful the equipment off and on, the user is encouraged to try to correct the for compliance could void the user's authority to operate the
  • LG M3703C-BA | User Guide - Page 3
    and the point where they exit from the apparatus. 3 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Only use attachments/accessories specified by the manufacturer. 4 Do not install near any heat sources such as radiators, heat registers, stoves
  • LG M3703C-BA | User Guide - Page 4
    drop onto the screen with something. 13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same
  • LG M3703C-BA | User Guide - Page 5
    dusty places. 22 If you smell smoke or other odors coming from the apparatus or hear strange sounds, unplug the power cord contact an authorized service center. 23 As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if
  • LG M3703C-BA | User Guide - Page 6
    odors or hear a strange sound unplug the power cord and contact the service center. - If you continue to use without taking proper measures, a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. Caution Make sure the product ventilation
  • LG M3703C-BA | User Guide - Page 7
    Safety Precautions Electrical Power Related Precautions Warning Make sure to connect the power cable to the grounded current. - You may be electrocuted or injured. Use the rated voltage only. - The product can be damaged, or you may be electrocuted. In the presence of thunder and lightning, never
  • LG M3703C-BA | User Guide - Page 8
    the damaged product can cause electric shock or fire. Contact an authorized the service center for repair. Caution Do not shock the product when moving it. discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. When the display is to be
  • LG M3703C-BA | User Guide - Page 9
    too closely. Set the appropriate resolution and clock by referring to the Userﾕs Guide. - Your vision can be impaired. Use authorized detergent only when much moisture may cause staining. On Disposal (Only, Hg lamp used LCD Monitor) The fluorescent lamp used in this product contains a small amount of
  • LG M3703C-BA | User Guide - Page 10
    - Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available in all model
  • LG M3703C-BA | User Guide - Page 11
    this button repetitively to select an appropriate time duration • PSM Button - Toggles through preset video settings. There is not a function which is supported • Menu Button • UP and Down buttons Bring up and down direction adjustment. • Mute button • Power On/Off Button • Input Select Button
  • LG M3703C-BA | User Guide - Page 12
    Using the Remote Control • AV Button Toggles through video AV Component RGB PC HDMI/DVI • Input Select Button If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. Input AV Component RGB PC HDMI/DVI ▲▼ Inserting
  • LG M3703C-BA | User Guide - Page 13
    user's guide could be different from the actual image. Rear View Power Connector : Connect the power cord RS-232C Serial Ports RGB PC, HDMI/DVI Ports -HDMI Supports Control Port AV Ports LAN Port Speaker Ports *LINE OUT A terminal used to connect to the speaker including a built-in amplifier (Amp
  • LG M3703C-BA | User Guide - Page 14
    DVI signal input cable (not included). * When HDMI PC is used, a compatiblity problem might occur. A Rear side of the product. PC MAC PC/MAC Macintosh Adapter ) B (not included) Rear side of the product. PC * User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable
  • LG M3703C-BA | User Guide - Page 15
    Connecting to External Devices 1 Turn on power by pressing the power button on the product. 2 Turn on the PC. Power button Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT ▼▲ SET Or, press the INPUT button on the back of the product. INPUT
  • LG M3703C-BA | User Guide - Page 16
    LAN cable as shown in the below figure . A Connect PC to Monitor directly. LAN B Using a router(Switch) LAN Switch Product PC C program, please refer to eZ-Net Guide in the enclosed CD-ROM. Note • Using LAN establishes communication between your PC and the monitor and enables to use the OSD
  • LG M3703C-BA | User Guide - Page 17
    Connecting to External Devices Daisy Chain Monitors Use this function when displaying ANALOG RGB inputs of a PC to the other product. • To use different products connected to each other Connect one end
  • LG M3703C-BA | User Guide - Page 18
    Connecting to External Devices VESA FDMI wall Mounting This product supports a VESA FDMI compliant mounting interface. These mounts are purchased separately and not available from LG. Refer to the instructions included with wall mount for more info. Kensington Security Slot The Set is equipped with
  • LG M3703C-BA | User Guide - Page 19
    Connecting to External Devices Video Input Connect the video cable as shown in the below figure and then connect the power cord (See page 13). A When connecting with a BNC cable. • C onnect the input terminal with a proper color match. B When connecting with a S-Video cable. • Connect to the S-
  • LG M3703C-BA | User Guide - Page 20
    Cable (not included) Audio Cable (not included) HDTV Receiver Note - Some devices may require HDCP in order to display HD signals. - Component doesn't support HDCP. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT ▼▲ SET Or, press the INPUT
  • LG M3703C-BA | User Guide - Page 21
    Signal Cable (not included) RCA-PC Audio Cable (not included) HDMI Signal Cable (not included) VCR/DVD/Set-top Box Note : Dolby Digital is not supported. VCR/DVD/Set-top Box Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT ▼▲ SET Or
  • LG M3703C-BA | User Guide - Page 22
    Connecting to External Devices Watching AV Outputs - When using AV input, you can connect the AV Out to other monitors. Video/apparatus BNC Cable (not included) Audio Cable (not included) Product BNC Cable (not included) Audio Cable (not included) Video/apparatus Note • When multi-connecting
  • LG M3703C-BA | User Guide - Page 23
    User Menus Screen Adjustment options Power Button • Press this button to turn on the power. Press this button again to turn it off. Power Indicator • This
  • LG M3703C-BA | User Guide - Page 24
    User Menus Screen Adjustment options AUTO/SET Button [For PC Analog signal] Auto in progress For optimal display change resolution to 1360x768 [When XGA Mode is
  • LG M3703C-BA | User Guide - Page 25
    User Menus OSD Menu Icon Function Description Picture Audio Time Option Information Adjusts screen brightness, contrast and color that you prefer. Adjusts the audio options. Adjusts
  • LG M3703C-BA | User Guide - Page 26
    User Menus How to adjust the OSD (On Screen Display) screen Pops up the menu screen Move where you want will be selected that fit into the current mode. If adjustment is not satisfactory, you can adjust the screen manually. [When XGA Mode is active and 1360 X 768 is selected] Auto in progress 25
  • LG M3703C-BA | User Guide - Page 27
    playing a game. • User1,2 : Select this option to use the user-defined settings. User2 Backlight 20 Contrast 90 Brightness 50 Color 50 Sharpness 50 : To control the brightness of the screen,adjust the brightness of LCD panel. Contrast : Adjust the difference between the light and dark
  • LG M3703C-BA | User Guide - Page 28
    Aspect Ratio Picture Reset Screen Cool Medium Warm User MENU Color Settings • Cool : Slightly purplish white. • Medium : Slightly bluish white. • Warm : Slightly reddish white. • User : Select this option to use the user-defined settings. User Red 0 Green 0 Blue 0 MENU Red / Green / Blue
  • LG M3703C-BA | User Guide - Page 29
    User Menus Adjusting Screen Color Advanced Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen To set MENU • Gamma : Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images.
  • LG M3703C-BA | User Guide - Page 30
    User Menus Adjusting Screen Color Aspect Ratio To select the image size of the screen. Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen
  • LG M3703C-BA | User Guide - Page 31
    User Menus Adjusting Screen Color Picture Reset Return Picture Mode, Color Temperature, video. Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen To set Screen Auto Config. Manual Config. XGA Mode Reset To set MENU MENU Auto Config. (RGB PC input only) : This
  • LG M3703C-BA | User Guide - Page 32
    type that you're currently watching. Audio Sound Mode Auto Volume Balance Speaker MENU Clear Voice Standard Music Cinema Sport Game User • Clear Voice : By differentiating the human sound range from others,it helps users listen to human voices better. • Standard : The most commanding and natural
  • LG M3703C-BA | User Guide - Page 33
    User Menus Adjusting the timer function Time Clock On/Off Timer Sleep Time Auto Sleep Power On Delay Power Saving _ _ : _ _ AM Clock MENU If the current time is incorrect, reset the clock manually When connecting multiple monitors and turning the power on, the monitors are turned on
  • LG M3703C-BA | User Guide - Page 34
    User Menus Adjusting the timer function Time Clock On/Off Timer Sleep Time Auto Sleep Power On Delay Power Saving MENU To set Power Saving Level
  • LG M3703C-BA | User Guide - Page 35
    User Menus Selecting the options Language Key Lock ISM Method Option Language Key Lock ISM Method Indicator DPM Select Tile Mode Network Setup Factory Reset MENU To set To choose the language in which the control names are displayed. Use the buttons to select On or Off. The monitor a problem.
  • LG M3703C-BA | User Guide - Page 36
    User Menus Selecting the options Option Language Key Lock ISM Method Indicator To set DPM Select Tile Mode Indicator Network of the product to On or Off. If you set On, the lamp will automatically be turned on. DPM Select A user can choose to turn the power saving mode on / off. 35
  • LG M3703C-BA | User Guide - Page 37
    User Menus Selecting the options • To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RS-
  • LG M3703C-BA | User Guide - Page 38
    User Menus Selecting the options - Tile mode (product 1 ~ 9) : c(3) x r(3) column ID 1 ID 2 ID 4 ID 5 ID 7 ID 8 - Tile mode (product 1 ~ 2) : c(2) x r(1) column ID 1 ID 3 ID 6 ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 ID 7 ID 8 row ID 9 ID10 ID 11 ID 12 ID 13 ID 14 ID 15 ID 16 37
  • LG M3703C-BA | User Guide - Page 39
    User Menus Selecting the options Tile mode Option Language Key Lock ISM Method Indicator DPM Select Tile Mode Network Setup Factory Reset MENU Tile Mode Off H-
  • LG M3703C-BA | User Guide - Page 40
    User Menus Selecting the options Network Setup Sets up network information. Option Language Key Lock ISM Method Indicator DPM Select Tile Mode Network Setup Factory Reset MENU To set Network Setup Network Select DHCP Manual MENU LAN RS-232C • Network Select • DHCP Sets up network connections
  • LG M3703C-BA | User Guide - Page 41
    User Menus Adjust Set ID and check Serial No. and SW version. Information Set ID Serial No. SW Version IP Address Set ID Serial No. SW
  • LG M3703C-BA | User Guide - Page 42
    Troubleshooting No image is displayed ● Is the product power cord connected? • See if the power cord is properly connected to the outlet. ● Is the power indicator light on? • See if the power switch is turned on. • May need service is supported by referring to the video card user manual. '
  • LG M3703C-BA | User Guide - Page 43
    Troubleshooting The screen image looks abnormal. ● Is the screen position wrong? • is not satisfactory, use the Position OSD menu. • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control
  • LG M3703C-BA | User Guide - Page 44
    Troubleshooting The audio function does not work. ● No sound on the screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD. The operation does not work normally. ● The power suddenly turned off , contact your local service center. 43
  • LG M3703C-BA | User Guide - Page 45
    Specifications The product specifications can change without prior notice for product improvement. LCD Panel Power Dimensions &Weight 37 inches Visible diagonal (94.0 cm)TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel 0.200 mm x 0.600 mm x RGB (Pixel Pitch) Rated Voltage Power
  • LG M3703C-BA | User Guide - Page 46
    , Humidity: 10% ~ 80% Storage Condition Temperature: -20°C ~ 60°C , Humidity: 5% ~ 90% * Applicable only for models that support the speakers Audio RMS Audio Output Input Sensitivity Speaker Impedance 10W+10W(R+L) 0.7Vrms 8Ω NOTE Information in this document is subject to change without notice
  • LG M3703C-BA | User Guide - Page 47
    x 480 4 640 x 480 *5 800 x 600 6 800 x 600 7 832 x 624 *8 1024 x 768 9 1024 x 768 *10 1280 x 720 Horizontal Frequency (kHz) 31.469 31.468 31.469 37.5 37.879 46.875 49.725 48.363 60.123 44.772 Vertical Frequency (Hz) 70.8 70.8 59.94 75 60.317 75 74.55 60
  • LG M3703C-BA | User Guide - Page 48
    your PC. RS-232C Cable (not included) PC monitor 1 monitor 2 monitor 3 monitor 4 RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) (Not Standard) PC RXD 2 TXD 3 GND 5 DTR 4 DSR 6 RTS 7 CTS 8 Monitor 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 (Female)
  • LG M3703C-BA | User Guide - Page 49
    mode 29. Fan Fault check 30. Elapsed time return 31. Temperature value 32. Lamp fault check 33. Auto Volume 34. Speaker 35. Time 36. On Timer (On/Off Timer) On, Off 37. Off Timer (On/Off Timer) On, Off 38. On Timer (On/Off Timer) Time 39. Off Timer (On/Off Timer
  • LG M3703C-BA | User Guide - Page 50
    RS-232C Controlling the Multiple Product 46. Power Saving 47. Power Indicator 48. H Position 49. V Position 50. H Size 51. V Size 52. Scheduling input select 53. Serial no. 54. S/W Version 55. Input Select COMMAND1 f f f f f f f f f x COMMAND2 l o q r s t u y z b DATA1 00H - 03H 00H - 01H 00H -
  • LG M3703C-BA | User Guide - Page 51
    RS-232C Controlling the Multiple Product Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1]: First command. (k, j, m, d, f,x) * [Command 2]: Second command.(a ~ u) * [Set ID]: Set up the Set ID number of product. range : 01H~63H. by setting '0',
  • LG M3703C-BA | User Guide - Page 52
    RS-232C Controlling the Multiple Product L Transmission / Receiving Protocol L 01. Power(Command : a) To control Power On/Off of the Set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK][Data][x] To show the status of Power
  • LG M3703C-BA | User Guide - Page 53
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 03. Aspect Ratio(Command : c) (Main picture format) To adjust the screen format. You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu. Transmission
  • LG M3703C-BA | User Guide - Page 54
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 05. Volume Mute(Command : e) To control On/Off of the Volume Mute. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On) Acknowledgement [e][ ][Set ID][ ][OK][
  • LG M3703C-BA | User Guide - Page 55
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 07. Contrast(Command : g) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H • Refer to 'Real data mapping' as shown
  • LG M3703C-BA | User Guide - Page 56
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 09. Color(Command : i) (Video Timing only) To adjust the screen color. You can also adjust the color in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal code) • Refer
  • LG M3703C-BA | User Guide - Page 57
    RS-232C Controlling the Multiple Product Transmission / Receiving Protocol L 11. Sharpness(Command : k) (Video Timing only) To adjust the screen Sharpness. You can also adjust the sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal
  • LG M3703C-BA | User Guide - Page 58
    the screen color temperature. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0 : Medium 1 : Cool 2 : Warm 3 : User Acknowledgement [u][ ][Set ID][ ][OK][Data][x] Data 0 : Medium 1 : Cool 2 : Warm 3 : User • Running the Color Temperature command changes the Picture Mode settings to User1. A11
  • LG M3703C-BA | User Guide - Page 59
    and signal exist) 1 : No signal (Power on) 2 : Turn the monitor off by remote control 3 : Turn the monitor off by sleep time function 4 : Turn the monitor off by RS-232C function 8 : Turn the monitor off by off time function 9 : Turn the monitor off by auto off function Acknowledgement [z][ ][Set ID
  • LG M3703C-BA | User Guide - Page 60
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 18. Auto Configure(Command: j u) To adjust picture position and minimize image shaking automatically. it works only in RGB(PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1 : To set Acknowledgement [u][ ][Set
  • LG M3703C-BA | User Guide - Page 61
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 20. Tile Mode(Command : d d) Change a Tile Mode. Transmission [d][d][][Set ID][][Data][x] Data 00 or 11 12 13 14 ... 55 Description Tile mode is off. 1 x 2 mode(column x row) 1 x 3 mode 1 x 4 mode ... 5 x 5 mode * The
  • LG M3703C-BA | User Guide - Page 62
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 21. Tile H Position(Command : d e) To set the Horizontal position. Transmission [d][e][][Set ID][][Data][x] Data Min : 00H ~ Max : 64H • Refer to 'Real data mapping' page A8. Acknowledgement [e][][Set ID][][OK/NG][Data
  • LG M3703C-BA | User Guide - Page 63
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 23. Tile H Size(Command : d g) To set the Horizontal size. Transmission [d][g][][Set ID][][Data][x] Data Min : 00H ~ Max : 64H • Refer to 'Real data mapping' page A8. Acknowledgement [g][][Set ID][][OK/NG][Data][x] 24.
  • LG M3703C-BA | User Guide - Page 64
    RS-232C Controlling the Multiple Product L Transmission / Receiving Protocol 25. Tile ID Set(Command : d i) To assign the Tile ID for Tiling function . Transmission [d][i][][Set ID][][Data][x] Data Min : 00H ~ Max : 19H (Hexadecimal code) Acknowledgement [i][][Set ID][][OK/NG][Data][x] L 26
  • LG M3703C-BA | User Guide - Page 65
    [d][y][][Set ID][][Data][x] Data Structure Data(Hex) 00 01 02 03 04 05 06 Mode Clear Voice Standard Music Cinema sport Game User Acknowledgement [y][][Set ID][][OK/NG][Data][x] L 29. Fan Fault check (Command : d w ) To check the Fan fault of the Apparatus. Transmission [d][w][][Set ID
  • LG M3703C-BA | User Guide - Page 66
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 30. Elapsed time return(Command : d l) To read the elapsed time. Transmission [d][l][][Set ID][][Data][x] * The data is always FF(in Hex). Acknowledgement [l][][Set ID][][OK/NG][Data][x] * The data means used hours. (
  • LG M3703C-BA | User Guide - Page 67
    the volume level. Transmission [d][u][][Set ID][][Data][x] Data 0 : Off 1 : On Acknowledgement [u][][Set ID][][OK/NG][Data][x] 34. Speaker (Command : d v) Turn the speaker on or off. Transmission [d][v][][Set ID][][Data][x] Data 0 : Off 1 : On Acknowledgement [v][][Set ID][][OK/NG][Data][x] A20
  • LG M3703C-BA | User Guide - Page 68
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 35. Time (Command : f a) Set the current time. Transmission [f][a][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday [Data2] 0H~17H (Hours
  • LG M3703C-BA | User Guide - Page 69
    bit7 : Everyday On Timer On(1), Off(0) Acknowledgement [b][][Set ID][][OK/NG][Data1][Data2][x] * Ignore from bit6 to bit0 when bit7(Everyday) is 1. 37. Off Timer (On/Off Timer) On, Off (Command : f c) Set days for Off Timer. Transmission [f][c][][Set ID][][Data1][][Data2][Cr] [Data1] 0 (Write), FFH
  • LG M3703C-BA | User Guide - Page 70
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 38. On Timer (On/Off Timer) Time (Command : f d) Set On Timer. Transmission [f][d][][Set ID][][Data1][][Data2][Data3][Cr] [Data1] 0 : Monday 1: Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 :
  • LG M3703C-BA | User Guide - Page 71
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 39. Off Timer (On/Off Timer) Time (Command : f e) Set Off Timer. Transmission [f][e][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 :
  • LG M3703C-BA | User Guide - Page 72
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 40. Sleep Time (Command : f f) Set Sleep Time. Transmission [f][f][][Set ID][][Data][Cr] Data 0 : Off 1 : 10 2 : 20 3 : 30 4 : 60 5 : 90 6 : 120 7 : 180 8 : 240 (Orderly) Acknowledgement [f][][Set ID][][OK/NG][Data][x] 41.
  • LG M3703C-BA | User Guide - Page 73
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 42. Power On Delay (Command : f h) Set the schedule delay when the power is turned on (Unit: second). Transmission [f][h][][Set ID][][Data][Cr] Data : 00H ~ 64H (Data value) • Refer to 'Real data mapping' page A8.
  • LG M3703C-BA | User Guide - Page 74
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 44. DPM Select (Command : f j) Set the DPM (Display Power Management) function. Transmission [f][j][][Set ID][][Data][Cr] Data 0 : Off 1: On Acknowledgement [j][][Set ID][][OK/NG][Data][x] 45. Reset (Command : f k)
  • LG M3703C-BA | User Guide - Page 75
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 46. Power saving(Command : f I) To set the Power saving mode. Transmission [f][I][][Set ID][][Data][Cr] Data 0 : Off 1: (static level 1) 2: (static level 2) 3: (static level 3) Acknowledgement [I][][Set ID][][OK/NG][
  • LG M3703C-BA | User Guide - Page 76
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 49. V Position (Command : f r) To set the Horizontal position Transmission [f][r][][Set ID][][Data][Cr] * The data range is from 00 to 64(in Hex) • Refer to 'Real data mapping' page A8. Acknowledgement [r][][Set ID][][
  • LG M3703C-BA | User Guide - Page 77
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 51. V Size (Command : f t) To set the Vertical size Transmission [f][t][][Set ID][][Data][Cr] * The data range is from 00 to 64(in Hex) • Refer to 'Real data mapping' page A8. Acknowledgement [t][][Set ID][][OK/NG][Data
  • LG M3703C-BA | User Guide - Page 78
    RS-232C Controlling the Multiple Product Transmission / Receiving Protocol L 52. Scheduling Input select (Command : f u) (Main Picture Input) To select input source for apparatus depending on day. Transmission [f][u][][Set ID][][Data1][][Data2][Cr] Data 1 Structure Min: 0~Max:7(0:Monday, 1:
  • LG M3703C-BA | User Guide - Page 79
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 54. S/W Version (Command : f z) Check the software version. Transmission [f][z][][Set ID][][Data][Cr] Data FFH : Read Acknowledgement [z][][Set ID][][OK/NG][Data][x] 55. Input Select (Command : x b) To select input
  • LG M3703C-BA | User Guide - Page 80
    connect Connect your wired remote control to Remote Control port on the Product. Remote Control IR Code Output waveform single pulse, modulated with 37.917KHz signal at 455KHz Tc Carrier frequency FCAR = 1/Tc = fosc/12 T1 Duty ratio = T1/Tc = 1/3 Configuration of frame • 1st frame Lead code
  • LG M3703C-BA | User Guide - Page 81
    RS-232C IR Codes Code(Hex) 00 01 02 03 08 C4 C5 09 98 0B 0E 43 5B 6E 44 10 11 12 13 14 15 16 17 18 19 5A BF D5 C6 79 76 77 AF 99 L L Function L M VOL( ) VOL( ) POWER ON/OFF POWER ON POWER OFF MUTE AV INPUT SLEEP MENU EXIT PSM SET Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4
  • LG M3703C-BA | User Guide - Page 82
    P/NO : 3840TRL098E (0801-REV00)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
M
ake sure to read the
Safety Precautions
before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
S
ee the label attached on the product and give the information to your dealer when you ask
for service.
M3703C
User's Guide
Temporary noise is normal when powering ON or OFF this device.