LG M4213C-BA User Guide

LG M4213C-BA Manual

Get LG M4213C-BA PDF manuals and user guides View all LG M4213C-BA manuals
Add to My Manuals
Save this manual to your list of manuals

LG M4213C-BA manual content summary:

  • LG M4213C-BA | User Guide - Page 1
    's Guide M4213C Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Temporary noise is normal when powering ON
  • LG M4213C-BA | User Guide - Page 2
    in the picture. Parts First, check if the following parts are all present. Screws (6) Stand (1) Cable management (1) 2. Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture. 3. Use the screws to secure the
  • LG M4213C-BA | User Guide - Page 3
    - Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available in all model
  • LG M4213C-BA | User Guide - Page 4
    To install Portrait - Only on some models. "When installing Portrait, rotate it clockwise based on its front." 3
  • LG M4213C-BA | User Guide - Page 5
    time duration • PSM Button - Toggles through preset video settings. There is not a function which is supported • Menu Button • UP and Down buttons Bring up and down direction adjustment. • Mute button • Power On/Off Button • Input Select Button (See next page) • ARC button Aspect Ratio Correction
  • LG M4213C-BA | User Guide - Page 6
    Using the Remote Control • AV Button Toggles through video AV Component RGB PC HDMI/DVI • Input Select Button If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. Input AV Component RGB PC HDMI/DVI ▲▼ Inserting
  • LG M4213C-BA | User Guide - Page 7
    Name and Function of the Parts * The product image in the user's guide could be different from the actual image. Rear View Power Connector : Connect the power cord RS-232C Serial Ports RGB PC, HDMI/DVI Ports -HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection).
  • LG M4213C-BA | User Guide - Page 8
    DVI signal input cable (not included). * When HDMI PC is used, a compatiblity problem might occur. A Rear side of the product. PC MAC PC/MAC Macintosh Adapter ) B (not included) Rear side of the product. PC * User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable
  • LG M4213C-BA | User Guide - Page 9
    Connecting to External Devices 1 Turn on power by pressing the power button on the product. 2 Turn on the PC. Power button Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT ▼▲ SET Or, press the SOURCE button
  • LG M4213C-BA | User Guide - Page 10
    Product PC Network Product PC Connect the LAN cNaebtlweoarnkd install the eZ-Net Manager program on the CD-ROM. For more information about the program, please refer to eZ-Net Guide in the enclosed CD-ROM. Note • Using LAN establishes communication between your PC and the monitor and enables
  • LG M4213C-BA | User Guide - Page 11
    Connecting to External Devices Daisy Chain Monitors Use this function when displaying ANALOG RGB inputs of a PC to the other product. • To use different products connected to each other Connect one end of the signal input cable(
  • LG M4213C-BA | User Guide - Page 12
    Connecting to External Devices VESA FDMI wall Mounting This product supports a VESA FDMI compliant mounting interface. These mounts are purchased separately and not available from LG. Refer to the instructions included with wall mount for more info. Kensington Security Slot The Set is equipped with
  • LG M4213C-BA | User Guide - Page 13
    Connecting to External Devices Video Input Connect the video cable as shown in the below figure and then connect the power cord (See page 7). A When connecting with a BNC cable. • C onnect the input terminal with a proper color match. B When connecting with a S-Video cable. • Connect to the S-
  • LG M4213C-BA | User Guide - Page 14
    video/audio cable as shown in the below figure and then, connect the power cord (See page 7). • Connect the input terminal with a proper color Note - Some devices may require HDCP in order to display HD signals. - Component doesn't support HDCP. Select an input signal. Press the INPUT button
  • LG M4213C-BA | User Guide - Page 15
    /576p/720p/1080i/1080p) - HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. Connect the video/audio cable as shown in the below figure and then connect the power cord (See page 7). Product Product
  • LG M4213C-BA | User Guide - Page 16
    AV Outputs - When using AV input, you can connect the AV Out to other monitors. Video/TV BNC Cable (not included) Audio Cable (not included) Product BNC Cable (not included) Audio Cable (not included) Video/TV Note • When multi-connecting in/out cascade format, no loss cables are recommended
  • LG M4213C-BA | User Guide - Page 17
    some models. 1. Arrange the cables in the center as shown in the following picture. 2. Fit the cable guide to the back to help manage the cables. Cable Management Removing the cable guide. Hold the Cable management with both hands and pull it downward. Warning • Do not use the cable management
  • LG M4213C-BA | User Guide - Page 18
    User Menus Screen Adjustment options Power Button • Press this button to turn on the power. Press this button again to turn it off. Power Indicator • This Indicator lights up blue when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicator color
  • LG M4213C-BA | User Guide - Page 19
    [For PC Analog signal] Auto in progress For optimal display change resolution to 1360x768 [When XGA Mode is active and 1360 X768 is selected] Auto in progress SORUCE Button SOURCE ▼▲ AUTO/SET - Toggles between inputs AV Component RGBPC HDMI/DVI Composite Video, Separate Video HDTV, DVD 15-pin
  • LG M4213C-BA | User Guide - Page 20
    User Menus OSD Menu Icon Function Description Picture Audio Time Option Information Adjusts screen check Serial No. and SW version and IP address Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. 19
  • LG M4213C-BA | User Guide - Page 21
    User Menus How to adjust the OSD (On Screen Display) screen Pops up the menu screen Move where you want to adjust Select a menu into the current mode. If adjustment is not satisfactory, you can adjust the screen manually. [When XGA Mode is active and 1360 X 768 is selected] Auto in progress 20
  • LG M4213C-BA | User Guide - Page 22
    this option to lower brightness by one level. • Sport : Select this option to display with a soft image. • Game : To enjoy dynamic image when playing a game. • User1,2 : Select this option to use the user-defined settings. User2 Backlight 20 Contrast 90 Brightness 50 Color 50 Sharpness 50
  • LG M4213C-BA | User Guide - Page 23
    Aspect Ratio Picture Reset Screen Cool Medium Warm User MENU Color Settings • Cool : Slightly purplish white. • Medium : Slightly bluish white. • Warm : Slightly reddish white. • User : Select this option to use the user-defined settings. User Red 0 Green 0 Blue 0 MENU Red / Green / Blue
  • LG M4213C-BA | User Guide - Page 24
    User Menus Adjusting Screen Color Advanced Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen To set MENU • Gamma : Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images.
  • LG M4213C-BA | User Guide - Page 25
    User Menus Adjusting Screen Color Aspect Ratio To select the image size of the screen. Picture Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset Screen
  • LG M4213C-BA | User Guide - Page 26
    User Menus Adjusting Screen Color Picture Reset Return Picture Mode, Color Temperature, are still trembling, adjust the picture phase manually. * Phase, Clock function are not available in Component, HDMI/DVI DTV.) Phase : To adjust the focus of the display. This item allows you to remove any
  • LG M4213C-BA | User Guide - Page 27
    type that you're currently watching. Audio Sound Mode Auto Volume Balance Speaker MENU Clear Voice Standard Music Cinema Sport Game User • Clear Voice : By differentiating the human sound range from others,it helps users listen to human voices better. • Standard : The most commanding and natural
  • LG M4213C-BA | User Guide - Page 28
    User Menus Adjusting the timer function Time Clock On/Off Timer Sleep Time Auto Sleep Power On Delay Power Saving _ _ : _ _ AM Clock MENU If the current time is incorrect, reset the clock manually. 1) Press the MENU button and then use button to select the Time menu. 2) Press the button and
  • LG M4213C-BA | User Guide - Page 29
    User Menus Adjusting the timer function Time Clock On/Off Timer Sleep Time Auto Sleep Power On Delay Power Saving MENU To set Power Saving Level On Time Off Time Off Level 1 Level 2 Level 3 Power Saving MENU This screen brightness adjusting menu helps you save energy. • Level: Total 4 screen
  • LG M4213C-BA | User Guide - Page 30
    User Menus Selecting the options Language Key Lock ISM Method Option Language Key Lock ISM Method Indicator DPM Select Tile Mode Network Setup Factory Reset MENU To set To choose the language in which the control names are displayed. Use the buttons to select On or Off. The monitor a problem.
  • LG M4213C-BA | User Guide - Page 31
    User Menus Selecting the options Option Language Key Lock ISM Method Indicator To set DPM Select Tile Mode Indicator Network Setup Factory Reset MENU Power Indicator Off Logo Light On Indicator MENU You can set the Power Indicator and Logo Light. Power Indicator Use this function
  • LG M4213C-BA | User Guide - Page 32
    User Menus Selecting the options • To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RS-232C or RGB Out Tile mode Option Language Key Lock ISM Method Indicator DPM Select Tile Mode Network Setup Factory Reset MENU Tile Mode H-
  • LG M4213C-BA | User Guide - Page 33
    User Menus Selecting the options - Tile mode (product 1 ~ 9) : c(3) x r(3) column ID 1 ID 2 ID 4 ID 5 ID 7 ID 8 - Tile mode (product 1 ~ 2) : c(2) x r(1) column ID 1 ID 3 ID 6 row ID 9 ID 2 row -
  • LG M4213C-BA | User Guide - Page 34
    User Menus Selecting the options Tile mode Option Language Key Lock ISM Method Indicator DPM Select Tile Mode Network Setup Factory Reset MENU Tile Mode Off H-Size 0 V-Size 0 H-Position < > V-Position < > Reset Tile ID 1 Natural Off • H-Size • V-Size • H-Position • V-Position •
  • LG M4213C-BA | User Guide - Page 35
    User Menus Selecting the options Network Setup Sets up network information. Option Language Key Lock ISM Method Indicator DPM Select Tile Mode Network Setup Factory Reset MENU To set Network Setup Network Select DHCP Manual MENU LAN RS-232C • Network Select • DHCP Sets up network connections
  • LG M4213C-BA | User Guide - Page 36
    are connected for display. Specify the number (01H~63H) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. This menu shows the serial number of the product. This menu shows the software version. Displays a selected network's IP
  • LG M4213C-BA | User Guide - Page 37
    Troubleshooting No image is displayed ● Is the product power cord connected? • See if the power cord is properly connected to the outlet. ● Is the power indicator light on? • See if the power switch is turned on. • May need service. ● Power is on, power indicator is blue but • Adjust
  • LG M4213C-BA | User Guide - Page 38
    Troubleshooting The screen image looks abnormal. ● Is the screen position wrong? • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel "Display" Setting menu. ● D o thin lines appear
  • LG M4213C-BA | User Guide - Page 39
    ) Select Control Panel - Display - Settings - Color Table LCD panel. It is not a malfunction of the LCD. The operation does not work normally. ● The power suddenly turned off. • Is the sleep timer set? • C heck the power control settings. Power interrupted. • "CAUTION! FAN STOP!" If the power
  • LG M4213C-BA | User Guide - Page 40
    prior notice for product improvement. M4213C LCD Panel Power Dimensions &Weight 42.02 inches (106.73 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 106.73 cm 0.227 mm X 0.681 mm X RGB (Pixel Pitch) Rated Voltage Power Consumption AC 100-240V~ 50
  • LG M4213C-BA | User Guide - Page 41
    D-Sub type, HDMI (digital), S-Video, Composite Video, Component, RS-232C, LAN Operational Condition Temperature: 0°C~ 40°C , Humidity: 10% ~ 80% Storage Condition Temperature: -20°C ~ 60°C , Humidity: 5% ~ 90% * Applicable only for models that support the speakers Audio RMS Audio Output Input
  • LG M4213C-BA | User Guide - Page 42
    Specifications PC Mode - Preset Mode Preset mode 1 640 x 350 2 720 x 400 *3 640 x 480 4 640 x 480 576p o o 720p o o 1080i o o 1080p o o 1~17: RGB Mode * : HDMI/DVI mode Power Indicator Mode On Mode Sleep Mode Off Mode Product Blue Amber - NOTE DTV/PC selection on RGB and HDMI/DVI
  • LG M4213C-BA | User Guide - Page 43
    your PC. RS-232C Cable (not included) PC monitor 1 monitor 2 monitor 3 monitor 4 RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) (Not Standard) PC RXD 2 TXD 3 GND 5 DTR 4 DSR 6 RTS 7 CTS 8 Monitor 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 (Female)
  • LG M4213C-BA | User Guide - Page 44
    value 32. Lamp fault check 33. Auto Volume 34. Speaker 35. Time 36. On Timer (On/Off Timer) On . On Timer (On/Off Timer) Time 39. Off Timer (On/Off Timer) Time 40. Sleep Time 41. Auto Sleep 42. Power On Delay 43. Language 44. DPM Select 45. Reset COMMAND1 k k k k k k k k k k k k k k k
  • LG M4213C-BA | User Guide - Page 45
    RS-232C Controlling the Multiple Product 46. Power Saving 47. Power Indicator 48. H Position 49. V Position 50. H Size 51. V Size 52. Scheduling input select 53. Serial no. 54. S/W Version 55. Input Select COMMAND1 f f f f f f f f f x COMMAND2 l o q r s t u y z b DATA1 00H -
  • LG M4213C-BA | User Guide - Page 46
    RS-232C Controlling the Multiple Product Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1]: First command. (k, j, m, d, f,x) * [Command 2]: Second command.(a ~ u) * [Set ID]: Set up the Set ID number of product. range : 01H~63H. by setting '0',
  • LG M4213C-BA | User Guide - Page 47
    On Acknowledgement [a][ ][Set ID][ ][OK][Data][x] To show the status of Power On/Off. Transmission [k][a][ ][Set ID][ ][FF][Cr] Acknowledgement [a][ ][Set ID][ ][OK][Data][x] Data 0 : Power Off 1 : Power On L 02. Input Select (Command : b) (Main Picture Input) To select input source for
  • LG M4213C-BA | User Guide - Page 48
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 03. Aspect Ratio(Command : c) (Main picture format) To adjust the screen format. You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu. Transmission
  • LG M4213C-BA | User Guide - Page 49
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 05. Volume Mute(Command : e) To control On/Off of the Volume Mute. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On) Acknowledgement [e][ ][Set ID][ ][OK][
  • LG M4213C-BA | User Guide - Page 50
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 07. Contrast(Command : g) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H • Refer to 'Real data mapping' as shown
  • LG M4213C-BA | User Guide - Page 51
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 09. Color(Command : i) (Video Timing only) To adjust the screen color. You can also adjust the color in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal code) • Refer
  • LG M4213C-BA | User Guide - Page 52
    RS-232C Controlling the Multiple Product Transmission / Receiving Protocol L 11. Sharpness(Command : k) (Video Timing only) To adjust the screen Sharpness. You can also adjust the sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal
  • LG M4213C-BA | User Guide - Page 53
    the screen color temperature. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0 : Medium 1 : Cool 2 : Warm 3 : User Acknowledgement [u][ ][Set ID][ ][OK][Data][x] Data 0 : Medium 1 : Cool 2 : Warm 3 : User • Running the Color Temperature command changes the Picture Mode settings to User1. A11
  • LG M4213C-BA | User Guide - Page 54
    : z) Abnormal State : Used to Read the power off status when Stand-by mode. Transmission [k][z][ ][Set ID][ ][Data][Cr] Data FF : Read 0 : Normal (Power on and signal exist) 1 : No signal (Power on) 2 : Turn the monitor off by remote control 3 : Turn the monitor off by sleep time function 4 : Turn
  • LG M4213C-BA | User Guide - Page 55
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 18. Auto Configure(Command: j u) To adjust picture position and minimize image shaking automatically. it works only in RGB(PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1 : To set Acknowledgement [u][ ][Set
  • LG M4213C-BA | User Guide - Page 56
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 20. Tile Mode(Command : d d) Change a Tile Mode. Transmission [d][d][][Set ID][][Data][x] Data 00 or 11 12 13 14 ... 55 Description Tile mode is off. 1 x 2 mode(column x row) 1 x 3 mode 1 x 4 mode ... 5 x 5 mode * The
  • LG M4213C-BA | User Guide - Page 57
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 21. Tile H Position(Command : d e) To set the Horizontal position. Transmission [d][e][][Set ID][][Data][x] Data Min : 00H ~ Max : 64H • Refer to 'Real data mapping' page A8. Acknowledgement [e][][Set ID][][OK/NG][Data
  • LG M4213C-BA | User Guide - Page 58
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 23. Tile H Size(Command : d g) To set the Horizontal size. Transmission [d][g][][Set ID][][Data][x] Data Min : 00H ~ Max : 64H • Refer to 'Real data mapping' page A8. Acknowledgement [g][][Set ID][][OK/NG][Data][x] 24.
  • LG M4213C-BA | User Guide - Page 59
    RS-232C Controlling the Multiple Product L Transmission / Receiving Protocol 25. Tile ID Set(Command : d i) To assign the Tile ID for Tiling function . Transmission [d][i][][Set ID][][Data][x] Data Min : 00H ~ Max : 19H (Hexadecimal code) Acknowledgement [i][][Set ID][][OK/NG][Data][x] L 26
  • LG M4213C-BA | User Guide - Page 60
    Hex) 00 01 02 03 04 05 06 Mode Clear Voice Standard Music Cinema sport Game User Acknowledgement [y][][Set ID][][OK/NG][Data][x] L 29. Fan Fault check (Command : d w ) To check the Fan fault of the TV. Transmission [d][w][][Set ID][][Data][x] * The data is always FF(in Hex). Data ff: Read Status
  • LG M4213C-BA | User Guide - Page 61
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 30. Elapsed time return(Command : d l) To read the elapsed time. Transmission [d][l][][Set ID][][Data][x] * The data is always FF(in Hex). Acknowledgement [l][][Set ID][][OK/NG][Data][x] * The data means used hours. (
  • LG M4213C-BA | User Guide - Page 62
    the volume level. Transmission [d][u][][Set ID][][Data][x] Data 0 : Off 1 : On Acknowledgement [u][][Set ID][][OK/NG][Data][x] 34. Speaker (Command : d v) Turn the speaker on or off. Transmission [d][v][][Set ID][][Data][x] Data 0 : Off 1 : On Acknowledgement [v][][Set ID][][OK/NG][Data][x] A20
  • LG M4213C-BA | User Guide - Page 63
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 35. Time (Command : f a) Set the current time. Transmission [f][a][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday [Data2] 0H~17H (Hours
  • LG M4213C-BA | User Guide - Page 64
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 36. On Timer (On/Off Timer) On, Off (Command : F b) Set days for On Timer. Transmission [f][b][][Set ID][][Data1][][Data2][Cr] [Data1] 0 (Write), FFH(Read) [Data2] 00H~FFH bit0 : Monday On Timer On(1), Off(0) bit1 :
  • LG M4213C-BA | User Guide - Page 65
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 38. On Timer (On/Off Timer) Time (Command : f d) Set On Timer. Transmission [f][d][][Set ID][][Data1][][Data2][Data3][Cr] [Data1] 0 : Monday 1: Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 :
  • LG M4213C-BA | User Guide - Page 66
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 39. Off Timer (On/Off Timer) Time (Command : f e) Set Off Timer. Transmission [f][e][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 :
  • LG M4213C-BA | User Guide - Page 67
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 40. Sleep Time (Command : f f) Set Sleep Time. Transmission [f][f][][Set ID][][Data][Cr] Data 0 : Off 1 : 10 2 : 20 3 : 30 4 : 60 5 : 90 6 : 120 7 : 180 8 : 240 (Orderly) Acknowledgement [f][][Set ID][][OK/NG][Data][x] 41.
  • LG M4213C-BA | User Guide - Page 68
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 42. Power On Delay (Command : f h) Set the schedule delay when the power is turned on (Unit: second). Transmission [f][h][][Set ID][][Data][Cr] Data : 00H ~ 64H (Data value) • Refer to 'Real data mapping' page A8.
  • LG M4213C-BA | User Guide - Page 69
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 44. DPM Select (Command : f j) Set the DPM (Display Power Management) function. Transmission [f][j][][Set ID][][Data][Cr] Data 0 : Off 1: On Acknowledgement [j][][Set ID][][OK/NG][Data][x] 45. Reset (Command : f k)
  • LG M4213C-BA | User Guide - Page 70
    Cr] Data 0 : Off 1: (static level 1) 2: (static level 2) 3: (static level 3) Acknowledgement [I][][Set ID][][OK/NG][Data][x] 47. Power Indicator (Command : f o) To set the LED for Power Indicator Transmission [f][o][][Set ID][][Data][Cr] Data 0 : Off 1: On Acknowledgement [o][][Set ID][][OK/NG][Data
  • LG M4213C-BA | User Guide - Page 71
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 49. V Position (Command : f r) To set the Horizontal position Transmission [f][r][][Set ID][][Data][Cr] * The data range is from 00 to 64(in Hex) • Refer to 'Real data mapping' page A8. Acknowledgement [r][][Set ID][][
  • LG M4213C-BA | User Guide - Page 72
    L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 51. V Size (Command : f t) To set the Vertical size Transmission [f][t][][Set ID][][Data][Cr] * The data range is from 00 to 64(in Hex) • Refer to 'Real data mapping' page A8. Acknowledgement [t][][Set ID][][OK/NG][Data
  • LG M4213C-BA | User Guide - Page 73
    Multiple Product Transmission / Receiving Protocol L 52. Scheduling Input select (Command : f u) (Main Picture Input) To select input source for TV depending on day. Transmission [f][u][][Set ID][][Data1][][Data2][Cr] Data 1 Structure Min: 0~Max:7(0:Monday, 1: Tuesday, 2: Wednesday, 3: Thursday
  • LG M4213C-BA | User Guide - Page 74
    L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 54. S/W Version (Command : f z) Check the software version. Transmission [f][z][][Set ID][][Data][Cr] Data FFH : Read Acknowledgement [z][][Set ID][][OK/NG][Data][x] 55. Input Select (Command : x b) To select input
  • LG M4213C-BA | User Guide - Page 75
    RS-232C IR Codes L L L How to connect Connect your wired remote control to Remote Control port on the Product. Remote Control IR Code Output waveform single pulse, modulated with 37.917KHz signal at 455KHz Tc Carrier frequency FCAR = 1/Tc = fosc/12 T1 Duty ratio = T1/Tc = 1/3
  • LG M4213C-BA | User Guide - Page 76
    44 10 11 12 13 14 15 16 17 18 19 5A BF D5 C6 79 76 77 AF 99 L L Function L M VOL( ) VOL( ) POWER ON/OFF POWER ON POWER OFF MUTE AV INPUT SLEEP MENU EXIT PSM SET Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
M
ake sure to read the
Safety Precautions
before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
S
ee the label attached on the product and give the information to your dealer when you ask
for service.
M4213C
User's Guide
Temporary noise is normal when powering ON or OFF this device.