LG N2B1DD2 Owner's Manual

LG N2B1DD2 Manual

Get LG N2B1DD2 PDF manuals and user guides
UPC - 058231293739
View all LG N2B1DD2 manuals
Add to My Manuals
Save this manual to your list of manuals

LG N2B1DD2 manual content summary:

  • LG N2B1DD2 | Owner's Manual - Page 1
    User Guide and Instruction Manual LG Network Storage N2B1 / N2R1
  • LG N2B1DD2 | Owner's Manual - Page 2
    disks. Product can be damaged. Do not dismantle or change the structure of the system in any way. This may 4 cause electric shock. When dealing with system components, strictly abide by the instruction manual. 5 Physical contact with the soldering on the backside of components may cause severe
  • LG N2B1DD2 | Owner's Manual - Page 3
    may be a sudden stoppage of electricity during operation - avoid moving the system during operation of the HDD, which may cause external physical shock 8 - . Hence safeguard the password. 9 ※ To create a new password, the system must be re-initialized. In this case, all data will be lost, and
  • LG N2B1DD2 | Owner's Manual - Page 4
    cords and sockets clean at all times to avoid fire and electrical 10 shock. In the event of moisture entering the system, immediately disconnect the 11 power and contact the service centre, to avoid the danger of system damage, electrical shock, and fire. 12 Do not block vents, as this will cause
  • LG N2B1DD2 | Owner's Manual - Page 5
    the system, 18 immediately disconnect the power, and contact the service centre. Keep heating devices and other electrical components at a distance from the 19 system to away from the system, as consuming any parts will cause serious 22 injury. In the event of swallowing any parts, such as screws
  • LG N2B1DD2 | Owner's Manual - Page 6
    warning 2 1. Introduction 10 LG Network Storage Introduction 10 Supported OS 11 Package Contents 12 Name of Each Part 13 2. LG Network Storage Installation 14 Hard disk installation and setup 14 'LG Network Storage Installer' installation (LG Network Storage system file installation,volume
  • LG N2B1DD2 | Owner's Manual - Page 7
    Contents 4. LG Network Storage Web Menu Use (for LG Network Storage administrators 46 System Settings 46 Network 46 Host 47 Interface 47 Workgroup/Domain 50 Remote Access 51 DDNS (Dynamic DNS 51 Date & Time 53 Date and Time Setup 53 NTP Set-up 54 Mail Notification 54 Volume Set-up 56
  • LG N2B1DD2 | Owner's Manual - Page 8
    Contents LG Network Storage Share Management 76 User 76 Group 78 Folder 80 Blu-ray / DVD 82 Burning 82 Service 86 DLNA(Digital Living Network Alliance 86 Network Server 90 FTP 90 AFP 92 Network Printer 93 iTunes 97 Time Machine 99 [Web Set-up 99 [Mac OS 101 iSCSI 103 [iSCSI
  • LG N2B1DD2 | Owner's Manual - Page 9
    users 127 Blu-ray / DVD 127 Burning 127 Top menu 131 My Information 131 6. LG Network Storage via network drive 132 Accessing the LG Network Storage data in Windows OS........ 132 MAC OS connection 136 Linux OS access 139 7. LG Network Storage Maintenance 142 LG Network Storage shut down
  • LG N2B1DD2 | Owner's Manual - Page 10
    1. Introduction 1. Introduction LG Network Storage Introduction Thank you for purchasing the LG Network Storage. 1) Now the LG Network Storage basic data-save and share functions can be used in Windows, Mac and Linux operating systems. 2) Similarly, the internal Blu-ray / DVD rewriter can be used
  • LG N2B1DD2 | Owner's Manual - Page 11
    to the LG Network Storage. This user manual contains express installation information as well as detailed options and functions. Supported OS LG Network Storage ∙ Windows XP, Server 2003, Vista ∙ Mac OS 10.x or later ∙ Linux (Redhat, Suse, Ubuntu) PC S/W PC S/W NAS Detector NAS Monitor Comnso
  • LG N2B1DD2 | Owner's Manual - Page 12
    ∙ LG Network Storage ∙ Product warranty ∙ 'LG Network Storage PC Software Installer' ∙ Quick install guide Quick install guide LG Network Storage N2B1 / N2R1 ∙ Power cord and adaptor ∙ LAN cable ∙ Hard disk fastening screw (x8) - enclosure only * Photographs of images from the manual may
  • LG N2B1DD2 | Owner's Manual - Page 13
    - Blue : running correctly ⑦ USB port: USB 2.0 interface ⑧ LCD window: displays current state ⑨ HDD/ODD state display LED: - Blue : running correctly - Red : abnormal state ⑩ Disk Open button: opens/closes optical disc drive tray ⑪ Blu-ray/DVD Drive ⑤ ⑥ ① USB port: USB 2.0 interface ② LAN port
  • LG N2B1DD2 | Owner's Manual - Page 14
    these instructions to install the LG Network Storage. If the LG Network Storage is internal, go to , otherwise go to Hard disk installation and setup The LG Network Storage hard disk rack is shown below. Refer to each part while
  • LG N2B1DD2 | Owner's Manual - Page 15
    cover of the LG Network Storage main system. ③ Unlock the hard disk rack by pushing the lock button upward. ④ Hold down the hard disk rack lever and pull the hard disk rack to separate it from the main system. ⑤ Insert the hard disk into the hard disk rack, and with a screw driver, screw the four
  • LG N2B1DD2 | Owner's Manual - Page 16
    2. LG Network Storage Installation ⑥ Match the hard disk rack label number and the LG Network Storage front panel number, to insert the hard disk rack into the slot. ⑦ Push the hard disk rack into the LG Network Storage main system until it makes a click. 16
  • LG N2B1DD2 | Owner's Manual - Page 17
    2. LG Network Storage Installation ⑧ To prevent accidental detachment of the hard disk rack, push down the lock button. ⑨ Similarly repeat the installation procedure for all the hard disks, one by one. 17
  • LG N2B1DD2 | Owner's Manual - Page 18
    "Enclosure_Mode" message pops up, let go of the arrow buttons. 9 ③ Once "Enclosure mode" is complete, the LG Network Storage will automatically reboot itself. In the case that the power shut down abnormally before the system successfully reached "Enclosure mode," please return to step 2 and re-run
  • LG N2B1DD2 | Owner's Manual - Page 19
    10 minutes Approx. 5 minutes Approx. 1 hour 1TB (500 GB * 2)) Approx. 10 minutes Approx. 10 minutes Approx. 1-2 hour 2TB (1 TB * 2) Approx. 10 minutes Approx. 20 minutes Approx. 4-5 hour Note: It is recommended not to use the LG Network Storage while RAID configuration, as this will cause
  • LG N2B1DD2 | Owner's Manual - Page 20
    2. LG Network Storage Installation LG Network Storage Connection In an environment with a DHCP server, selecting automatic IP search after connecting the LG Network Storage to the IP router/switch/hub will acquire the network information from the DHCP server. For a particular IP address allocated
  • LG N2B1DD2 | Owner's Manual - Page 21
    usage) The "LG Network Storage PC Software Intaller" CD enclosed with the LG Network Storage product purchased includes the following programs: 1. NAS Detector The "NAS Detector" quickly and easily detects the LG Network Storage on the user's network. 2. NAS Monitor The "NAS Monitor" allows real
  • LG N2B1DD2 | Owner's Manual - Page 22
    2. LG Network Storage Installation Available programs for installation may vary depending on user's OS environment Program Supported Operating System Windows Mac Linux Acrobat Reader O O - Flash Player O O - NAS Detector O O - NAS Monitor O - - Comnso Backup O - -
  • LG N2B1DD2 | Owner's Manual - Page 23
    the "LG Network Storage PC Software Installer" CD in the PC's optical drive (CD/DVD/BD drives). After a short while, the following menu will appear. * Installation on PCs without a fiber optic drive may be processed using the iSCSI function of LG Network Storage. Please refer to 4 Service - iSCSI
  • LG N2B1DD2 | Owner's Manual - Page 24
    Detector" icon on the desk top to open the program. ② The 'NAS Detector' will automatically search the LG Network Storage connected to the user's PC. When the searching is completed, the LG Network Storage IP Address, MAC Address, and Host Name information are displayed on the screen. The factory
  • LG N2B1DD2 | Owner's Manual - Page 25
    If the search on the 'NAS Detector' is unsuccessful, re-check the Network connection. For manual setup see section . ③ If the search result of the LG Network Storage information is chosen, as well as default network information of the LG Network Storage, including the Subnet mask, Default
  • LG N2B1DD2 | Owner's Manual - Page 26
    is used or if there is a DHCP server on the network. * If no IP address is allocated, use the IP address "NAS Detector" or check the DHCP option and automatically assign an IP address ⑤ If the 'Open Web Menu' button is clicked, the web menu of the selected LG Network Storage can be accessed. 26
  • LG N2B1DD2 | Owner's Manual - Page 27
    "Open Web Menu" or "Open Network Folder", a pop up message appears with "Yes", which when selected will produce a shortcut icon on the desk top, and after which the LG Network Storage web menu and network folder can be easily accessed. NAS web menu shortcut NAS network folder shortcut 2
  • LG N2B1DD2 | Owner's Manual - Page 28
    2. LG Network Storage Installation < Using the LG Network Storage web menu > The web menu offers LG Network Storage management features such as Network Information, Share management, and Service management. It also offers menus to setup data storing using Blu-ray/DVD drives and synchronized storage
  • LG N2B1DD2 | Owner's Manual - Page 29
    can be performed, similar to the internal or external HDDs connected to the PC. ① Double click the LG Network Storage network folder shortcut. ② The LG Network Storage Blu-ray/DVD drive under folder name "cdrom" and "service" / "volume" will appear. ③ To view the contents of the disc inserted in the
  • LG N2B1DD2 | Owner's Manual - Page 30
    obtains an IP address through automatic connection with LG Network Storage. This allows the user to easily access the network folder or the web even after a change of IP address without changing the settings. The NAS Monitor icon will show up as Windows' tray icon when the program running, on the
  • LG N2B1DD2 | Owner's Manual - Page 31
    the FTP server. The NAS Detector program is run to change the IP address of the LG Network Storage. This menu will properly function only after the NAS Detector has been completely installed. This function is used to change the LG Network Storage mode from maximum energy
  • LG N2B1DD2 | Owner's Manual - Page 32
    LG Network Storage screen will be as follows. * If the LAN cable is unplugged, the network icon ( ) will not appear on the LCD window. If the network appears, activating the LG Network Storage. Power Off Pressing the POWER button for longer than 3 seconds will shut down the system after showing the
  • LG N2B1DD2 | Owner's Manual - Page 33
    up to be acquired automatically (DHCP) or in the process of acquiring IP address. ② Icon is activated when user has logged on to LG Network Storage by opening the network folder. ③ Icon is activated when the memory card/USB/e-SATA devices are connected. ④ Icon is activated when CD/DVD/BD media are
  • LG N2B1DD2 | Owner's Manual - Page 34
    allow access to various functions of LG Network Storage. Action modes activated by using the arrow keys are as follows: Action modes comprises 6 modes of [Stand-by Screen] - [Information Mode] - [IP Setting Mode] - [USB Back-Up Mode] - [ODD Back-Up Mode] - [Hibernation Mode] in order and user may
  • LG N2B1DD2 | Owner's Manual - Page 35
    LCD panel and front button usage Information Mode Information Mode shows the current status and information of LG Network Storage. Once in the [Information Mode], user may use the arrow keys to move through [IP Address Information] - [System Firmware Version] - [HDD Usage Capacity] - [Date and Time
  • LG N2B1DD2 | Owner's Manual - Page 36
    is not configured in advance, 'HDD Config First' will appear. [Date and Time Information] This shows the current date and time set up in the LG Network Storage. [FAN RPM Information] This allows to check the current Fan rotation per minute of
  • LG N2B1DD2 | Owner's Manual - Page 37
    3. LCD panel and front button usage IP SETTING MODE The LG Network Storage IP can be set up by using the Set key and entering [IP SETTING MODE]. The arrow keys may be used to navigate through menus [Manual IP set-up] - [Automatic IP set-up] - [Return to stand-by screen], and the Set key may be
  • LG N2B1DD2 | Owner's Manual - Page 38
    for the IP address set-up. ⑦ Press the Set key. ⑧ Set up the gateway address following the procedure for the IP address set-up. * L G Network Storage recommends that user manually sets up the IP address given to the IP administrator in order to prevent potential clashes with a router or any other
  • LG N2B1DD2 | Owner's Manual - Page 39
    be found on http://www.lge.com. LG Network Storage may not function properly if a memory card, not listed on the website, is to be used. [Simple Back-up - OneTouch Back-up] Connect the USB or the memory card to LG Network Storage. As soon as the system reads the device, the following message will
  • LG N2B1DD2 | Owner's Manual - Page 40
    Service/back-up/ USB Folder name Manufacture company name_Serial No./ File back-up format /Date folder created ※ In the case of simple back-ups, if one storage USB Synchronize Set-Up. [USB Back-up Mode] Using the arrow keys to move to USB Back-up Mode and pressing the Set key will activate the
  • LG N2B1DD2 | Owner's Manual - Page 41
    using LG Network Storage (ODD Backup) LG Network Storage provides functions to back up data saved in optic disks such as CD/DVD/Blu-Ray on to LG Network Storage with a simple click of a button. ① Insert the optic disk to be backed up in the LG Network Storage BD/DVD drive. ② Once the system reads
  • LG N2B1DD2 | Owner's Manual - Page 42
    is a function to back up the content of the disk on to LG Network Storage just as it was originally in the disk. Selecting the Data Copy function will back up user's data in subfolders created by back-up date under service/back-up/disc-data folders. If Data Copy is executed more than
  • LG N2B1DD2 | Owner's Manual - Page 43
    . Once back-up is complete, user's data is saved in subfolders created by back-up date under service/back-up/disc-image folders. If back-up takes place more than once on one day, a serial the LCD and back-up will not be processed. ② Disks recorded in multi-sessions will not support Image Back-ups. 43
  • LG N2B1DD2 | Owner's Manual - Page 44
    3. LCD panel and front button usage Hibernation Mode Hibernation Mode shuts down all services of NAS and minimizes the energy used in the overall system including the HDD to run NAS in maximum energy save mode. In the maximum energy save mode, all of the above icons will disappear. To change from
  • LG N2B1DD2 | Owner's Manual - Page 45
    3. LCD panel and front button usage Tray open / close (DISC OPEN button) Pressing the "DISC OPEN" button in the bottom front will open the tray on which the disc can be placed. Pressing the "DISC OPEN" button or softly pushing the tray when the tray is open will close the tray. 45
  • LG N2B1DD2 | Owner's Manual - Page 46
    administrators) 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) System Settings Network In the Network setting menu, an important set-up needs to be made to connect the LG Network Storage to the network. If the set up is not performed correctly, connection problems will
  • LG N2B1DD2 | Owner's Manual - Page 47
    Use (for LG Network Storage administrators) Host ① Designate an LG Network Storage host name. The server name has a limit of 12 characters, this can be a combination of letters, digits, underscores and hyphens; the first characters though must be a letter or a number. Names permitted: LG-NAS, LGNAS
  • LG N2B1DD2 | Owner's Manual - Page 48
    (for LG Network Storage administrators) ∙ IP address: Enter desired IP address. ∙ Subnet Mask: Enter the subnet mask that suits the current network environment. ∙ Default Gateway: Define the outgoing route. If no gateway exists on the network, enter the IP address. ∙ Default DNS server address
  • LG N2B1DD2 | Owner's Manual - Page 49
    Frame Size: If the Ethernet frame size is at least 1500 gigabits, specified files can be sent quickly and with ease. In this case, the LG Network Storage alone does not change, but so do the PC and home router/router/hub/switch frame sizes. Otherwise performance will be reduced. 49
  • LG N2B1DD2 | Owner's Manual - Page 50
    that the Windows network supports. This will allow for access to the LG Network Storage shared folder in Windows. In addition to this, the LG Network Storage domain service supports a Windows Active Directory, enabling the import of existing user information, with ease and speed. ① Select the
  • LG N2B1DD2 | Owner's Manual - Page 51
    : Input password. ♣ P assword is required in the case that domain name needs to be re-registered for reasons of system initialization, replacement of LG Network Storage among others. It is important to remember the password. ④ Click on the 'Apply' button. ♣ If 'Disable' is selected after a domain
  • LG N2B1DD2 | Owner's Manual - Page 52
    for the router to forward network requests received by the router to the LG Network Storage, and the UPnP port forwarding function allows the router to forward data without a separate router set-up. (This option is only available if the router is such that supports the UPnP port forwarding function
  • LG N2B1DD2 | Owner's Manual - Page 53
    to display the accurate time and log times, the system time should be properly set up. Date and Time Setup ① To manually set the date and time, click on the 'Edit' button. Use 'standard time zone' to designate the current local region for LG Network Storage. The standard time zone set-up may affect
  • LG N2B1DD2 | Owner's Manual - Page 54
    time. This accurate time should continuously activate the NTP. To use the Default Time Server, refer to pool.ntp.org server time. Mail Notification To use Mail Notification, the LG Network Storage usage amount can be periodically checked. Registration information and results will be sent to users
  • LG N2B1DD2 | Owner's Manual - Page 55
    Storage Web Menu Use (for LG Network Storage administrators) ② To use it check 'Enable' if 'Disable' is not used. If 'Enable' is checked, proceed with the following steps: ③ SMTP Server Address: Input the Mail Server address. Refer to the information page in the network administrator Mail Service
  • LG N2B1DD2 | Owner's Manual - Page 56
    A includes detailed instructions on volume construction and it is recommended to refer to the list of recommended hard disks by visiting the URL provided in Appendix D. ♣ W hen volume is configured, part of the hard disk is allocated to the LG Network Storage system. Consequently, after volume
  • LG N2B1DD2 | Owner's Manual - Page 57
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ② On the top are the current volume array and a detailed description. If the volume has not yet been configured, there will not be any
  • LG N2B1DD2 | Owner's Manual - Page 58
    . ① Press the End button in the web, system → power → end. ② Insert the second disk in the LG Network Storage and turn the power on. To add new hard disks, refer to Chapter 2 LG Network Storage Installation. ③ In the web, log in and open system → volume ④ Press the "add/remove disk" button
  • LG N2B1DD2 | Owner's Manual - Page 59
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Remove disk Forced removal of the hard disk without following the remove disk functions provided in this screen may cause future complications with system performance and loss of user's important data. Therefore, it is
  • LG N2B1DD2 | Owner's Manual - Page 60
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Trahsbox Removing a file or folder when the network drive is still connected creates a trashbox and all deleted files are temporarily moved here. If user were to recover the deleted data, user may find
  • LG N2B1DD2 | Owner's Manual - Page 61
    LG Network Storage Web Menu Use (for LG Network Storage administrators) Selective Mirror (Selective data protection for folders) The Selective Mirror function automatically generates copies of certain folders, which allows data recovery even after the loss of source data. Add Selective Mirror List
  • LG N2B1DD2 | Owner's Manual - Page 62
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Edit Selective Mirror List ① Checkbox the item to be edited and press the 'edit' button. * Only one item can be edited at a time. ② Edit the "source path" and the "
  • LG N2B1DD2 | Owner's Manual - Page 63
    be designated a destination folder. ⑤ A folder designated as a destination folder cannot be designated as a source folder in another setting. Power Settings related to power for the LG Network Storage can be adjusted (Hibernation, UPS and System Shutdown). 63
  • LG N2B1DD2 | Owner's Manual - Page 64
    . Reading or writing LG Network Storage data during the hibernation mode will gradually reactivate the LG Network Storage hard disks and fully activate after 3-15 seconds. * It is recommended to utilize the stand-by function if user expects to leave the system unattended or NAS is not being used
  • LG N2B1DD2 | Owner's Manual - Page 65
    ' to activate UPS, or 'Disable' to deactivate. When selecting 'Enable', proceed to the next step. * LG Network Storage supports APC Style USB UPS only. ② ③ ④ ③ Decide whether to shut down LG Network Storage after designated time interval or when UPS power becomes low in case of unexpected external
  • LG N2B1DD2 | Owner's Manual - Page 66
    the "edit" button. ② Select "apply" to activate or "cancel" to deactivate. ③ To select "apply", select "apply" in the schedule window and enter the beginning and ending time for LG Network Storage. The set-up time must have at least 5 minutes gap from the current time. For example, if the current
  • LG N2B1DD2 | Owner's Manual - Page 67
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ Once it reaches the beginning time set up, the system automatically transitions into max energy save mode and on the LCD will appear a message, "Now Working. . ." ⑥ Once the system is fully in max energy save mode, the
  • LG N2B1DD2 | Owner's Manual - Page 68
    Shutdown Do not go directly to the LG Network Storage, as LG Network Storage can be turned on and shut down via the web. ① Restart - Ends all current operations and restarts the LG Network Storage. - A warning will appear when clicking the button, and the system can be restarted by clicking on the
  • LG N2B1DD2 | Owner's Manual - Page 69
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Activating the System Remotely Once LG Network Storage has entered its max energy save mode, it can be activated through remote internet access. The screen accessible through the internet is slightly different from the log -
  • LG N2B1DD2 | Owner's Manual - Page 70
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Language Setting The web menu indicates a language selection capability. ① Click on the 'Edit' button to available). For use of multiple lanuages, select unicode. Unicode can be selected only if user's program supports it. 70
  • LG N2B1DD2 | Owner's Manual - Page 71
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Firmware LG Network Storage firmware settings can be changed (Upgrade, Initialization, Configuration and Backup/Restore). Upgrade LG Network Storage system and Blu-ray/DVD Driver firmware can be downloaded from the product
  • LG N2B1DD2 | Owner's Manual - Page 72
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [System Firmware Upgrade] ① Verify connection to the Internet and download system firmware for the LG Network Storage from the product site linked below. ☞ http://www.lge.com ② Press the "find" button to select the system
  • LG N2B1DD2 | Owner's Manual - Page 73
    Storage Web Menu Use (for LG Network Storage administrators) [Blu-ray/DVD Drive Firmware Upgrade] ① Verify connection to the Internet and download the firmware for the Blu-ray/DVD drive attached to the LG Network Storage from the product site linked below. ☞ http://www.lge.com ② Select the Blu-ray
  • LG N2B1DD2 | Owner's Manual - Page 74
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Configuration Back-up This allows the back-up/recovery of settings for LG Network Storage at a certain time. Network settings (host name, IP address, workgroup), time setting (date/time, NTP), mail notification service
  • LG N2B1DD2 | Owner's Manual - Page 75
    saved to PC and click on the 'Save' button to save them to PC. [Restore NAS User Settings Saved on PC] NAS settings can be restored using configuration files saved on the PC. 1.C hoose the 'Restore LG Network Storage configuration from configuration file backed up in PC' menu and select from saved
  • LG N2B1DD2 | Owner's Manual - Page 76
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) LG Network Storage Share Management This function allows you to create users and groups as well as folders, and hence change settings for their access authorization. User Current
  • LG N2B1DD2 | Owner's Manual - Page 77
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Enter user password. ④ Enter user password again for confirmation. ⑤ Enter user's name. ⑥ User description can be added. ⑦ Enter user e-mail As long as mail server settings are correct, the registration result will be sent
  • LG N2B1DD2 | Owner's Manual - Page 78
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Group Current registered groups are displayed. Groups can be created and deleted, as well as the addition or removal of users in registered groups. [
  • LG N2B1DD2 | Owner's Manual - Page 79
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Enter group description. ④ Select user to be added to the group by clicking on the create the group. [Editing Groups] By clicking on the 'Group Name' link in the registered group list, group attributes can be altered. 79
  • LG N2B1DD2 | Owner's Manual - Page 80
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Folder Current registered folders are displayed. A folder can be created/changed/deleted for file sharing and/or authorization settings access changed to the created
  • LG N2B1DD2 | Owner's Manual - Page 81
    LG Network Storage administrators) ③ Enter folder description. ④ Set the volume where the folder will be created if there is more than one. ⑤ Decide whether to permit folder sharing through SMB, AFP, FTP or Webday protocol. - Windows: Activates folder sharing through SMB protocol on Windows/Mac
  • LG N2B1DD2 | Owner's Manual - Page 82
    using the Blu-ray/DVD drive. Burn Disc Burning LG Network Storage files to disc is possible. [Button functions]     : Moves to upper folder. : Refreshes the current folder. : Files or folders selected on the left window are sent to the right window to organize a list for recording
  • LG N2B1DD2 | Owner's Manual - Page 83
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ① Move the intended folder or file to the destined location. ② Selecting a folder or file to record and move to the right side produces a configuration data list. ③ Specify disc name in the ''Disc Name' window 83
  • LG N2B1DD2 | Owner's Manual - Page 84
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ④ Click on the button and confirm that disc writing is possible as indicated in the disc status box. ⑤ Pressing the button begins the burning
  • LG N2B1DD2 | Owner's Manual - Page 85
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑥ At the end of the burning process, the tray ejects and the disc can be removed. 85
  • LG N2B1DD2 | Owner's Manual - Page 86
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Service DLNA(Digital Living Network Alliance) DLNA, which stands for Digital Living Network Alliance, allows sharing multimedia data such as music, video, or images saved in other devices through connecting digital devices
  • LG N2B1DD2 | Owner's Manual - Page 87
    data saved in LG Network Storage may be viewed by selecting LG Media Server under Library. ♣ Note ∙ For detailed instructions on Windows Media® Player 11, refer to the Help function of Windows Media® Player 11. ∙ Some user PC may have installed its own unique DLNA server software. For detailed
  • LG N2B1DD2 | Owner's Manual - Page 88
    LG Network Storage Web Menu Use (for LG Network Storage administrators) [Playing DLNA server contents on PS3™] Once PS3™ is turned on, the DLNA server within the network will automatically be searched and the found server icon will appear on ( images) / (music) / (video). ① Select the DLNA server
  • LG N2B1DD2 | Owner's Manual - Page 89
    if [Media server search] has been activated. (Set-up) (Network set-up) [Using DLNA in Digital Image Frame] ① Activate the DLNA function in LG Network Storage. ② Perform a default set-up and driver set-up following the Digital Image Frame user manual. ③ Search the LG Network Storage in the
  • LG N2B1DD2 | Owner's Manual - Page 90
    as AV Device] Use contents by activating the DLNA function connected to the network. Set-up procedure may vary depending on connected device. For detailed instructions, refer to the relevant device user manual. Network Server Access to the LG Network Storage through FTP/FTPs or AFP is configured
  • LG N2B1DD2 | Owner's Manual - Page 91
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) * U sing the DDNS service offered by LG Network Storage will log on to ftp:// myname.lgnas.com:port number. For more details, please refer to system remote control . * T o use the default port value 21, user may log
  • LG N2B1DD2 | Owner's Manual - Page 92
    by the Windows operating system does not support FTPS. Generally most commercial FTP connection programs support FTPS and more details may be found in the relevant program manual. (A typical free FTP connection program such as File Zila does not allow access to LG Network Storage through FTPS
  • LG N2B1DD2 | Owner's Manual - Page 93
    " to connect the network printer, after which an LG Network Storage printer icon appears. ② Doubling clicking on the icon shows the progress of the printer driver installation. For installation issues refer to the printer manual. ③ If installation is unsuccessful use the network printer service. 93
  • LG N2B1DD2 | Owner's Manual - Page 94
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Mac users] ① Click on Go/ Utilities in the tool menu. ② Click on the Printer Setup Utility. 94
  • LG N2B1DD2 | Owner's Manual - Page 95
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Click on Add. ④ Hold the alt key down while clicking on More Printers. 95
  • LG N2B1DD2 | Owner's Manual - Page 96
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ In the pop up window: i. Select Advanced. ii. Select Windows Printer via SAMBA. 96
  • LG N2B1DD2 | Owner's Manual - Page 97
    . The printer appears in the printer list. Now the printer is ready for use. * Linux users must consult the OS manual, or inquire at the printer company. iTunes Using the iTunes services and recreating music files stored to the LG Network Storage through PC/Mac iTunes programs is possible. Music
  • LG N2B1DD2 | Owner's Manual - Page 98
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ① For required use, select 'Enable' for iTunes Streaming Service. ② Set Music Library Update Frequency. - Forced update (manual): Activate once the music file service for Streaming to begin the service. To create a music
  • LG N2B1DD2 | Owner's Manual - Page 99
    to be stored in LG Network Storage in their latest version. ♣ T his service is available in only Mac OS X version 10.5 Leopard or later versions. [Web Set-up] ① Enter the host name. The host name is the local host name after deleting ".local" found under "System Environment Set-up" → "Shared
  • LG N2B1DD2 | Owner's Manual - Page 100
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ② Enter the MAC address. The Mac address can be found by going to "Application Programs" → "Utilities" → "Terminal" and running the "ifconfig" command. Enter the "ether" address under en0. ③ Select "enable" and
  • LG N2B1DD2 | Owner's Manual - Page 101
    (for LG Network Storage administrators) [Mac OS] ① Go to "Move" → "Connect to Server" and enter "afp://LG Network Storage IP address" under "Server Address", then click "Connect". * The AFP function must already be activated under network server settings. ② If the log-in window appears, enter
  • LG N2B1DD2 | Owner's Manual - Page 102
    select "Timemachine" and press the "OK" button. ④ Go to "Settings" → "Time Machine", press "Change disk...", select LG Network Storage "Timemachine" and press "Enable as back-up". ⑤ When the log-in window appears again, repeat instruction (2) and the Time Machine will be "On" and back-up begins in
  • LG N2B1DD2 | Owner's Manual - Page 103
    the LG Network Storage Blue-ray/DVD drive as a CD drive. The LG Network Storage iSCSI service allows multiple users' log-in and usage. [iSCSI Initiator Installation] In order to use the iSCSI, the Initiator program must be installed in the computer A. Initiator Installation on a Windows PC For
  • LG N2B1DD2 | Owner's Manual - Page 104
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) C. Initiator Installation on a Mac Install the globalsan iSCSI initiator. This can be downloaded from the "studio network solutions" homepage. ☞ Website http://www.studionetworksolutions.com [Server Synchronization]
  • LG N2B1DD2 | Owner's Manual - Page 105
    (for LG Network Storage administrators) ② Find the iSCSI target (LG-NAS). Click on the Discover tap on the top of the iSCSI Initiator program. Then click the "Add" button on the bottom. Then a new window to Add Target Portal (picture below) should appear. Enter the target (LG Network Storage
  • LG N2B1DD2 | Owner's Manual - Page 106
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Log in. Go to the Targets tab on the cop of the iSCSI Initiator program. If all of the above procedures have been followed properly, the iSCSI Initiator will find and list the information for the target (LG-NAS).
  • LG N2B1DD2 | Owner's Manual - Page 107
    LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑥ Log out when done. Go to the Targets tab on the top of the iSCSI compatibility issues between iSCSI Initiator and Windows Vista, the Windows Vista built-in ODD record functions, mastered or live file system, may not be
  • LG N2B1DD2 | Owner's Manual - Page 108
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) B. Connection on a Linux PC ① Activate the iSCSI initiator. $ /etc/init.d/open-iscsi start ② Find the iSCSI target. If the LG NAS (target)'s IP address is 192.168.10.2, the target is: $ iscsiadm -m discovery -t
  • LG N2B1DD2 | Owner's Manual - Page 109
    .conf"and set up the CHAP certification. Follow the below instructions. (The CHAP certificate password must match the password set up for the iSCSI service on the LG Network Storage webpage.) discovery.sendtargets.auth.authmethod = CHAP discovery.sendtargets.auth.username = inAdmin
  • LG N2B1DD2 | Owner's Manual - Page 110
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) C. Connection on a Mac ① Activate iSCSI initiator. Go to System Preferences -> globalSAN iSCSIㄴ ② Find the iSCSI target. If the IP address is 192.168.10.2, see below. Go to globalSAN iSCSI -> Portals and press "+"
  • LG N2B1DD2 | Owner's Manual - Page 111
    Network Storage Web Menu Use (for LG Network Storage administrators) ③ Log in. Go to globalSAN iSCSI -> Targets, select the relevant target name and click "Log On. . . ." and then "Connect" on the pop-up window. ④ Confirm that the target is connected as follows. Go to Utilities -> System
  • LG N2B1DD2 | Owner's Manual - Page 112
    LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ Log out when done. Go to globalSAN iSCSI -> Targets, select the relevant target name and click "Log Off. . . ." and then "Disconnect" on the pop-up window. * Notes Because the LG Network Storage Blue-ray drive network
  • LG N2B1DD2 | Owner's Manual - Page 113
    downloaded, the file can be found in the network folder [Refer to How to Use the LG Network Storage Network Folder] under \service\Torrent. [Use] ① Open: Register the file to download (.torrent). ② Remove: Removes the selected file from the list. This does not delete the file itself. ③ Remove
  • LG N2B1DD2 | Owner's Manual - Page 114
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑧ Filter: Hides or unhides the filter item. ⑨ Inspector: Hides or unhides the information for the selected file. [Set-up] ① Click on the set-up icon. ② Select Preferences and set up the port to be used, transfer speed limit,
  • LG N2B1DD2 | Owner's Manual - Page 115
    device and memory card lists on the LG Network Storage are displayed. ① Connect a USB or memory device to the LG Network Storage. * O n the back panel of the LG Network Storage there are 2 USB ports, on the front panel of the LG Network Storage there is 1 USB
  • LG N2B1DD2 | Owner's Manual - Page 116
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ The task name is saved. (automatically generated) case that USB automatic synchronization is not selected, once the USB is recognized in the system, a message asking whether to backup the USB will pop up on the LCD and
  • LG N2B1DD2 | Owner's Manual - Page 117
    selected, and the 'Delete' button is clicked, the task is deleted. ② If the list task name is clicked, editing is possible. For back-ups of removable storage devices, LG Network Storage supports Incremental back-up and Full back-up. Back-up data are saved in
  • LG N2B1DD2 | Owner's Manual - Page 118
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) The Incremental back-up will create a folder for the back-up date with the above files. It also creates a Last Backup folder containing all of the files in the USB. The system folder structure is as follows: `--
  • LG N2B1DD2 | Owner's Manual - Page 119
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) For the 3rd back0up (Jan 3, 2009), e.txt has been opened, modified and saved. Only e.txt file will be saved in the new folder. In
  • LG N2B1DD2 | Owner's Manual - Page 120
    Network Storage Network, Volume and external devices can be viewed. For more specific details or to make changes, clicking on the icons on the bottom will direct the users to the relevant webpage. ①② ③ ④ ⑤⑥ ⑦ ① Mac Address, IP, Subnet Mask, Gateway, DNS Server, Ethernet Frame Size, link Speed
  • LG N2B1DD2 | Owner's Manual - Page 121
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ All hard disk information connected to the LG Network Storage can be viewed by Bay position ④ The information pertaining to the Blu-ray drive connected to the LG Network Storage can be viewed. ⑤ The information
  • LG N2B1DD2 | Owner's Manual - Page 122
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Log The LG Network Storage service history can be displayed/saved. ① ② ③ ④ ⑤ ① The system use history can be viewed. ② The share folder use history can be viewed. 122
  • LG N2B1DD2 | Owner's Manual - Page 123
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ The FTP use history can be viewed. ④ The diagnosis is und and the result can be viewed - The service code for proper functions is displayed as [SVC_ CODE: 00_00]. ⑤ Selected tab log can be downloaded to the client PC.
  • LG N2B1DD2 | Owner's Manual - Page 124
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Top menu WebDAV LG Network Storage supports the WebDAV function which allows to remotely drag and drop, open and save functions after logging on to LG Network Storage from the web. ("MS Office file" only) * T he WebDAV
  • LG N2B1DD2 | Owner's Manual - Page 125
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ① Select the WebDAV icon on the top. ② Go through user certification. This is the same as the user certification required for network folder access. ③ Once certified, the following screen will pop up and file drag
  • LG N2B1DD2 | Owner's Manual - Page 126
    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) My Information ① Click the "My information" button on the left top corner. This displays the user information. ② Click on the "Edit" button on the
  • LG N2B1DD2 | Owner's Manual - Page 127
    using the Blu-ray/DVD drive. Burn Disc Burning LG Network Storage files to disc is possible. [Button functions]     : Moves to upper folder. : Refreshes the current folder. : Files or folders selected on the left window are sent to the right window to organize a list for recording
  • LG N2B1DD2 | Owner's Manual - Page 128
    5. LG Network Storage web menu usage (Regular users) ① Move the intended folder or file to the destined location. ② Selecting a folder or file to record and move to the right side produces a configuration data list. ③ Specify disc name in the ''Disc Name' window 128
  • LG N2B1DD2 | Owner's Manual - Page 129
    5. LG Network Storage web menu usage (Regular users) ④ Click on the button and confirm that disc writing is possible as indicated in the disc status box. ⑤ Pressing the
  • LG N2B1DD2 | Owner's Manual - Page 130
    5. LG Network Storage web menu usage (Regular users) ⑥ At the end of the burning process, the tray ejects and the disc can be removed. 130
  • LG N2B1DD2 | Owner's Manual - Page 131
    5. LG Network Storage web menu usage (Regular users) Top menu My Information ① Click the "My information" button on the left top corner. This displays the user information. ② Click
  • LG N2B1DD2 | Owner's Manual - Page 132
    6. LG Network Storage via network drive 6. LG Network Storage via network drive The file sharing service is the most important function in LG Network Storage. This section pertains to Windows, Mac, Linux OS, which are explained in reference to their use with the LG Network Storage network drive.
  • LG N2B1DD2 | Owner's Manual - Page 133
    can be accessed. If IP address is unknown, refer to or . Windows File Sharing Use Open the web browser and input 『\\IP address』 in the address bar. The server can be accessed after the log in. If the IP address is unknown, refer
  • LG N2B1DD2 | Owner's Manual - Page 134
    LG Network Storage via network drive Tip) Post server connection, network drive set-up If there is a connection to the LG Network Storage, all sharing folders are registered. If settings involve the network drive using the "Tools > Map Network Drive...", future connection to the LG Network Storage
  • LG N2B1DD2 | Owner's Manual - Page 135
    6. LG Network Storage via network drive * Multiple folders can be set up in different network drives in the same way. 135
  • LG N2B1DD2 | Owner's Manual - Page 136
    6. LG Network Storage via network drive MAC OS connection MAC users can connect to the LG Network Storage by methods such as explained below. ["Server connect" function use] The LG Network Storage sharing folder can be added to the Mac server list on the desk top. The connection order is as follows.
  • LG N2B1DD2 | Owner's Manual - Page 137
    6. LG Network Storage via network drive ③ Input the log in ID and password and click on the 'OK' button. The initial settings are as follows: ID: admin, password: admin. For future security, it is recommended that password is changed after logging on to the web administrator page. 137
  • LG N2B1DD2 | Owner's Manual - Page 138
    6. LG Network Storage via network drive ④ Select the volume to be used (e.g. cdrom/service/volume1) in the LG Network Storage folder list and click "OK". ⑤ The relevant shared folder will open and the contents displayed. 138
  • LG N2B1DD2 | Owner's Manual - Page 139
    6. LG Network Storage via network drive Linux OS access LG Network Storage supports Windows, MAC, and Linux OS, through the SMB service. The Linux system connection is as follows. Ubuntu will be used as a reference. ① Click on the menu bar and then select 'network'. ② Click on "Windows Network" and
  • LG N2B1DD2 | Owner's Manual - Page 140
    6. LG Network Storage via network drive ③ Selecting LG Network Storage will display the folder list of LG Network Storage. Select the volume to be used (e.g. cdrom/service/volume1). ④ If the ID and passwords are inputted then connection to the LG Network Storage is allowed. Initial default
  • LG N2B1DD2 | Owner's Manual - Page 141
    6. LG Network Storage via network drive ⑤ After logging in, the LG Network Storage share folder appears. 141
  • LG N2B1DD2 | Owner's Manual - Page 142
    LG Network Storage maintenance and selfdiagnosis. LG Network Storage shut down/restart The following steps pertain to server shut down/restart. ① Inform all connected users to save files in operation and stop use of the LG Network Storage. ② Open the administrator web page, and go to the 'System
  • LG N2B1DD2 | Owner's Manual - Page 143
    IP configuration: DHCP mode will be set up as default mode ③ Network set up/TCP/IP configuration : Jumbo frame inactivity ④ System device/IP filter: All connections are allowed ⑤ RAID components ⑥ Service set-up value ⑦ User/folder/group list ∙ Log in to the LG Network Storage using the default user
  • LG N2B1DD2 | Owner's Manual - Page 144
    Information' menu then check and save settings in 'System Log', 'Samba Log' and 'FTP Log'. Self-diagnosis execution The LG Network Storage, by virtue of built in self-diagnosis mode, helps users easily recognize and handle problems arising on the server. * The volume must first be constructed before
  • LG N2B1DD2 | Owner's Manual - Page 145
    can get help from LG electronics Service Site if such errors were caused by negligence. http://www.lge.com. ③ When no solution exists, do not disassemble and call the service center for remote technical support. Power cut or failure When power failure occurs, the LG Network Storage will return to
  • LG N2B1DD2 | Owner's Manual - Page 146
    trouble shooting . RAID trouble shooting The LG Network Storage RAID configuration is abnormal when error messages appear, hence resort to another solution: Note: To avoid data obstacles, first perform a back-up of all important data from the LG Network Storage LG Network Storage state LED will
  • LG N2B1DD2 | Owner's Manual - Page 147
    trouble shooting 2. Problem solutions Removing the HDD with the error and connecting a new hard drive (e.g. HDD 2) will display the new hard disk status to be inactive on the system procedure and avoids abnormal system operation or data obstruction. 1. In the LG Network Storage, one HDD can be
  • LG N2B1DD2 | Owner's Manual - Page 148
    8. RAID trouble shooting Appendix A Volume Construction & RAID Configuration This section describes volume configuration and supported RAID level. When configuring volume using RAID, the use of Disks of the same manufacturer and capacity is recommended to maximize stability and efficiency of
  • LG N2B1DD2 | Owner's Manual - Page 149
    8. RAID trouble shooting ∙ Mirroring volumes Data can be exactly replicated to the Disk through this technique. If one Disk becomes damaged in the volume, data can be efficiently transferred, saved and backed up to another configured Disk. The volume's storage capacity is equal to that of the
  • LG N2B1DD2 | Owner's Manual - Page 150
    8. RAID trouble shooting ∙ RAID0 striping volume The Disks are configured in parallel so that is damaged. Subsequently, if the Disk is damaged, the saved data in the volume will be lost. The storage capacity of the volume as a whole is the sum of the capacities of all of the Disks. This technique
  • LG N2B1DD2 | Owner's Manual - Page 151
    trouble shooting ∙ JBOD Linear volume The Disks are configured in series so that they are all being used at once to store data, as if they were one Disk in summation. The volume's storage damaged, saved date in the volume will be lost. The storage capacity of the volume as a whole is the sum of the
  • LG N2B1DD2 | Owner's Manual - Page 152
    8. RAID trouble shooting Appendix B Technical Support LG Network Storage provides dedicated online support and customer service via instant messenger. You can contact us by the following means: -. Online Support : http://www.lgservice.com LG Electronics U.S.A. Inc, 1000 Sylvan Ave. Englewood Cliffs
  • LG N2B1DD2 | Owner's Manual - Page 153
    8. RAID trouble shooting Appendix C Open source software notice The following GPL executables and LGPL libraries used in this product are subject to the -rc ∙ gcc ∙ gpm ∙ grep ∙ hostname ∙ ifplugd ∙ ifupdown ∙ inadyn ∙ inotify-tools ∙ jQuery ∙ krb5 ∙ libcap ∙ libgdbm ∙ libid3tag ∙ Linux Kernel 153
  • LG N2B1DD2 | Owner's Manual - Page 154
    8. RAID trouble shooting ∙ lockfile-progs ∙ logrotate ∙ lprng ∙ lsb ∙ lzo ∙ module-init-tools ∙ mtd ∙ mt-daapd ∙ netatalk ∙ netbase ∙ net-tools ∙ noflushd ∙ ntfs-3g ∙ pam ∙ perl ∙ proftpd ∙ psmisc ∙ readline ∙ scst-iscsi ∙ sed ∙ sg3-utils ∙ shadow ∙ smbwebclient ∙ ssmtp ∙ sysklogd ∙ time ∙
  • LG N2B1DD2 | Owner's Manual - Page 155
    8. RAID trouble shooting GPLv3.0 : ∙ binutils ∙ gnupg ∙ parted ∙ rsync ∙ samba ∙ wget LGPLv2.1 : ∙ acl ∙ Ajaxplorer ∙ attr ∙ avahi ∙ codepress ∙ confuse ∙ debmapper ∙ dialog ∙ glib2.0 ∙ glibc ∙ gmp ∙ gnutls8 ∙ keyutils ∙ libdaemon ∙ libexif ∙ libgcrypt ∙ libgpg-error ∙ libiconv ∙ libidn ∙
  • LG N2B1DD2 | Owner's Manual - Page 156
    8. RAID trouble shooting LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: [email protected] This offer is valid for a period of
  • LG N2B1DD2 | Owner's Manual - Page 157
    8. RAID trouble shooting This product includes other open source software. ∙ bind9 : Copyright © 2004-2008 Internet Systems Consortium, Inc. ("ISC") Copyright © 1996-2003 Internet Software Consortium. Copyright © 1996-2001 Nominum, Inc. ∙ cyrus-sasl2: Copyright © 1998-2003 Carnegie Mellon University
  • LG N2B1DD2 | Owner's Manual - Page 158
    8. RAID trouble shooting ∙ Prototype JavaScript framework: Copyright © 2005-2008 Sam Stephenson ∙ Scriptaculous : to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights
  • LG N2B1DD2 | Owner's Manual - Page 159
    .com. Recommendation hard disk list The following is a list of hard disks possibly compatible with the LG Network Storage. The following hard disks are recommended. In the case of using hard disks not recommended by LG Electronics, malfunctions in the LG Network Storage can occur. For updated hard
  • LG N2B1DD2 | Owner's Manual - Page 160
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
N2B1 / N2R1
User Guide and Instruction Manual
LG Network Storage