LG PQDSBC Owner's Manual - Page 7
Installation outside of the indoor unit
View all LG PQDSBC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installation outside of the indoor unit Anchor the rear case of Dry Contact for communication on the installation surface at holes using anchor screws. Installation Method Please cut the pole which is located in side of the front case properly. Connect connection wires according to the instructions. (Reference to Setting and Using Method) Then, connect wire to PCB after going through hole of . Perform the switch setting according to switch setting method. (Reference to Setting and Using Method) Join the front case and the rear case, anchor the front case at holes using anchor screws. DRY CONTACT UNIT 1. Install the product on flat surface and install anchoring screws at more than 2 places. Otherwise the central controller may not be anchored properly. 2. Do not tighten anchoring screws too tightly. It may cause deformation of the case. 3. Do not deform the case at random. It may cause malfunction of the central controller. Owner's & installation manual 7