LG RU-50PZ61 Owners Manual
LG RU-50PZ61 Manual
 |
View all LG RU-50PZ61 manuals
Add to My Manuals
Save this manual to your list of manuals |
LG RU-50PZ61 manual content summary:
- LG RU-50PZ61 | Owners Manual - Page 1
PLASMA TV OWNER'S MANUAL MODELS: RU-42PZ61/71 RU-50PZ61 RU-60PZ61 Please read this manual carefully and completely before operating your TV. Retain this manual for future reference. Record model number and serial number of the TV in the spaces provided below. See the label attached on the back cover - LG RU-50PZ61 | Owners Manual - Page 2
NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The and maintenance (servicing) instructions in the literature device, pursuant to Part 15 of the FCC with the instruction manual, may or an experienced radio/TV technician for help. authorization from LG Electronics. Unauthorized - LG RU-50PZ61 | Owners Manual - Page 3
the simple precautions discussed in this manual can help you get many years of damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer operating instructions. 12. Power-Cord Polarization This product is equipped with a three-wire grounding type - LG RU-50PZ61 | Owners Manual - Page 4
mast and supporting structure, grounding of the lead-in wire to an antenna Instructions Ground Clamp Electric Service Equipment NEC - National Electrical Code Antenna Lead in Wire -line surges. 16. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines - LG RU-50PZ61 | Owners Manual - Page 5
Instruction 10 Joinning the TV assembly to the wall to protect the set tumbling .11 Speakers mounted on the monitor 11 Mounting speakers on TV 11 Connecting Speakers to the Monitor using the speaker wires 21 Fleshtone 22 sRGB 22 Manual Picture Control (APC set to ~46 Troubleshooting Checklist - LG RU-50PZ61 | Owners Manual - Page 6
that you expect. Each sub-pixel is individually controlled by advanced electronics to produce over 16 million different colors. All of this means and thin size makes it easy to install your plasma display in a variety of locations where conventional TVs will not fit. The PDP Manufacturing Process: a - LG RU-50PZ61 | Owners Manual - Page 7
TV. Front Panel Controls Introduction ON/OFF FRONT A/V INPUT S-VIDEO VIDEO L/MONO AUDIO R R TruSurround XT TV 78 9 10 11 R TruSurround XT TV/VIDEO MENU VOL CH RU-50PZ61 RU-60PZ61 RU-42PZ61 RU-42PZ71 23 4 1 5 6 7 Illuminates green when the TV is turned on. 8. TV/VIDEO or ENTER Button - LG RU-50PZ61 | Owners Manual - Page 8
Output) Connect to optional external speaker(s). * For further information, refer to 'Speaker & Speaker Stand' manual. Audio/Video Input 1 Connect audio/video output from an external device to these jacks. Antenna Input Connect cable or antenna signals to the TV, either directly or through your - LG RU-50PZ61 | Owners Manual - Page 9
sources. NUMBER buttons FCR Use to scroll the Surf channel list. HD LIGHT MODE POWER TV/VIDEO MULTIMEDIA ARC FCR REVIEW MUTE Switches the sound on or off. MUTE VOL APC CH VOLUME UP/DOWN Increases AA batteries. Don't mix old or used batteries with new ones. Replace cover. Owner's Manual 9 - LG RU-50PZ61 | Owners Manual - Page 10
are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. 2-Speaker+2-supporter hanger (Only RU-42PZ61/71,50PZ61 series) Power Supply Short-circuit Breaker 10 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 11
or wound wire cables, (not supplied with the product), as shown. Speakers mounted on the monitor - RU-60PZ61 series TV's speaker is saled, separately . - Here shown may be somewhat different from your TV. • Mounting speakers on TV a Assemble the monitor to speaker with using the supporter hanger - LG RU-50PZ61 | Owners Manual - Page 12
on the set as shown. (Only RU-60PZ61 series) 1. Put the RING Equipment Connections Antenna Connection - Antenna or Cable Service without a Cable Box Connections - For optimum Bronze Wire Be careful not to bend the bronze wire when connecting the antenna. O Antenna 12 Plasma TV Signal Amplifier - LG RU-50PZ61 | Owners Manual - Page 13
the VCR owner's manual.) 3. Select the input source by the TV/VIDEO button on the TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service - LG RU-50PZ61 | Owners Manual - Page 14
external equipment. Refer to external equipment operating guide. COMPONENT INPUT 2 COMPONENT INPUT 1 VIDEO manual for operating instructions. • Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV - LG RU-50PZ61 | Owners Manual - Page 15
set-top box. Installation R L EXTERNAL SPEAKER REMOTE CONTROL RS-232C INPUT (CONTROL/SERVICE) DVI INPUT AUDIO INPUT RGB INPUT COMPONENT the digital set-top box. (Refer to the owner's manual for the digital set-top box.) 2. Use TV/VIDEO or MULTIMEDIA on the remote control to select Component - LG RU-50PZ61 | Owners Manual - Page 16
on the display by pressing the POWER button on the TV's remote control. 3. Use TV/VIDEO or MULTIMEDIA on the remote control to select RGB, or DVI source. 4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is - LG RU-50PZ61 | Owners Manual - Page 17
70.01 75.00 85.00 75.06 59.922 74.926 84.887 60.02 60.02 RU-42PZ61/71 RGB / DVI Mode Resolution 640x350 720x400 Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.468 70.09 37.861 85.08 31.469 70.08 .01 75.00 85.00 75.06 59.922 74.926 84.887 60.02 60.02 RU-50/60PZ61 Owner's Manual 17 - LG RU-50PZ61 | Owners Manual - Page 18
TV On * In this manual, the OSD (On Screen Display) may be different from your TV's because it is just an example to help you with the TV operation. Turning on the TV just after installation 1. Connect power cord correctly. 2. Press the ON/OFF button on the TV the ENTER button to save. 18 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 19
AUTO PROGRAM mode, the TV will memorize the channels in ascending numerical order. If there are additional channels you want to add or delete, you can manually add or delete those channels with Manual Program. Auto Program: Channel Search - Redo Auto Program if the Plasma Display is ever moved to - LG RU-50PZ61 | Owners Manual - Page 20
TV and then use D / E button to select Manual program. 3. Press the G button and then program Manual program G TV 2 PICTURE to wait for the TV to scan through all Review) button repeatedly. The eight favorite channels appear on the screen in numerical order. CHANNEL PICTURE Auto program Manual - LG RU-50PZ61 | Owners Manual - Page 21
adjusts the TV to the best picture appearance. - If adjusting picture options (contrast, brightness, color, sharpness, or tint) manually, APC automatically at the factory and cannot be changed. XD - XD is LG Electronic's unique picture improving technology to display a real HD source through - LG RU-50PZ61 | Owners Manual - Page 22
On Contrast 100 Off TIMER Brightness 55 SPECIAL Color 55 SCREEN PIP/DW LOCK Menu Prev. Manual Picture Control (APC set to Off option) - You can adjust picture contrast, brightness, Contrast Brightness Color Sharpness Tint 100 G 60 50 50 0 PIP/DW LOCK Menu Prev. 22 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 23
the TV has the appropriate sound options based on the program content. - If you adjust sound options (Treble and Bass) manually, DASP PICTURE SOUND TIMER DASP BBE AVL Balance Treble Bass SPECIAL G On Off 0 50 50 SCREEN PIP/DW LOCK Menu Prev. AVL (Auto Volume Leveler) - AVL maintains - LG RU-50PZ61 | Owners Manual - Page 24
Manual Treble 50 TIMER Bass 50 3. speakers in mono sound. 1. Press the MTS button repeatedly. Mono Stereo SAP • Select mono sound mode if the signal is not clear or in poor signal reception areas. • Stereo, SAP modes are available only if included on the broadcast signal. 24 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 25
On timer Auto off TIMER SPECIAL SCREEN PIP/DW LOCK Menu Prev. G Auto Manual Time zone Auto PBS Channel TV 2 Daylight Saving Auto Manual Clock Setup - If current time setting is wrong, reset the clock manually. 1. Press the MENU button and then use D / E button to select the TIMER - LG RU-50PZ61 | Owners Manual - Page 26
the SLEEP button repeatedly until --- Min appears. Auto Off - If set to on and there is no input signal, the TV turns off automatically after 10 minutes. 1. Press the MENU button and then use D / E button to select the TIMER TIMER SPECIAL SCREEN PIP/DW LOCK Menu Prev. G On Off 26 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 27
TV can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by locking out the front panel controls. - This TV is programmed to remember which option it was last set to even if you turn the TV on the TV's screen a problem, ISM TV - LG RU-50PZ61 | Owners Manual - Page 28
Special Menu Options continued Low Power - Low power reduces the plasma display power consumption. 1. Press the MENU button and then use D / E button to select the SPECIAL menu. 2. Press the G button Method Low power Set ID Caption / Text Captions Demo PIP/DW MENU Prev. G To start 28 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 29
of the antenna may improve reception. • SNOW: If your receiver is located at the weak, fringe area of a TV signal, your picture may be marred by small dots. It may be necessary to install a special antenna to improve the LOCK Menu Prev. CC1 CC2 CC3 CC4 Text1 Text2 Text3 Text4 Owner's Manual 29 - LG RU-50PZ61 | Owners Manual - Page 30
After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. - The Auto config. and Manual config. are not active in DVI mode. 1. Press the adjust the position. 4. Press the ENTER button to save. SCREEN PIP/DW LOCK Menu Prev. 30 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 31
Auto config. PICTURE ARC Position SOUND Manual config G TIMER Reset SPECIAL SCREEN PIP/DW LOCK Menu Prev. Phase 0 Clock 0 Selecting VGA mode (RGB-PC mode only) - To see a normal picture, match the resolution of RGB mode and selection of VGA mode. - RU-42PZ71 model only. 1. Press the MENU - LG RU-50PZ61 | Owners Manual - Page 32
Screen adj. ARC Cinema YNR Reset SPECIAL SCREEN PIP/DW LOCK Menu Prev. G On Off Luminance Noise Reduction (TV, Video 1-2 and Component 480i modes only) - Use YNR to reduce the picture noise that may appear on the YNR Reset SPECIAL SCREEN PIP/DW LOCK Menu Prev. On G Off 32 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 33
to normal viewing, press the SPLIT ZOOM button again. 9-Split zoom 1 23 4 56 7 89 Example of choosing 5. Section 5 is enlarged to fill the screen. Owner's Manual 33 - LG RU-50PZ61 | Owners Manual - Page 34
devices you have hooked up. 3. Press the ENTER button to save. Note • If you ever forget your password, key in '7', '7', '7', '7' on the remote control. 34 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 35
pictures (sources) on your TV screen at the same time. allowing 2 picture sources to be shown on the TV screen at the same time. Each source is (PIP Mode only) Main Picture Sub Picture TV Program selection for PIP Press the PIPCH+ Sources TV, Video 1-2, Component 480i TV, Video 1-2, Component 480i - LG RU-50PZ61 | Owners Manual - Page 36
-232C Setup R L EXTERNAL SPEAKER REMOTE CONTROL RS-232C INPUT (CONTROL/SERVICE) DVI INPUT AUDIO INPUT RGB CTS 8 3 TXD 2 RXD 5 GND 6 DSR 4 DTR 8 CTS 7 RTS D-Sub 9 D-Sub 9 36 Plasma TV 1 5 9 6 3-Wire Configurations (Not standard) PC PDP RXD 2 TXD 3 GND 5 DTR 4 DSR 6 RTS 7 CTS 8 3 TXD - LG RU-50PZ61 | Owners Manual - Page 37
) based on this format when receiving abnormal data from non-viable functions or communication errors. Data 1: Illegal Code 2: Not supported function 3: Wait more time COM- COM- DATA 0 DATA 1 DATA 2 DATA 3 MAND 1 MAND 2 (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) 32. Tune Command - LG RU-50PZ61 | Owners Manual - Page 38
][Set ID][ ][Data][Cr] Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK][Data][x] 38 Plasma TV 05. Volume Mute (Command2:e) G To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission - LG RU-50PZ61 | Owners Manual - Page 39
Sound menu. Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 • Refer to 'Real data mapping 1'. See page 38. Acknowledgement [r][ ][Set ID][ ][OK][Data][x] Owner's Manual 39 - LG RU-50PZ61 | Owners Manual - Page 40
mapping 3' as shown right. Acknowledgement [w][ ][Set ID][ ][OK][Data][x] 40 Plasma TV 23. Blue Adjustment (Command2:$) G To adjust blue in color temperature. Transmission in PIP mode. Transmission [k][y][ ][Set ID][ ][Data][Cr] Data 0 : TV 1 : Video 1 2 : Video 2 3 : Component 1 4 : Component - LG RU-50PZ61 | Owners Manual - Page 41
(Command: m c) G To send IR remote key code Transmission [m][c][ ][Set ID][ ][Data][ ][Cr] Data Key code: Refer to page 43. Acknowledgement [c][ ][Set ID][ ][OK][Data][x] Owner's Manual 41 - LG RU-50PZ61 | Owners Manual - Page 42
IR Codes IR Codes How to Connect G Connect your wired remote control to the Remote Control port on the Monitor. Remote Control IR Code G Output waveform G Frame interval : Tf The waveform is transmitted as long as a key is depressed. Tf Tf 0.56 ms 2.24 ms 42 Plasma TV Tf=108ms @455KHz - LG RU-50PZ61 | Owners Manual - Page 43
TV VIDEO1 VIDEO2 COMPONENT1 COMPONENT2 DVI RGB SLEEP MENU ENTER APC DASP PIP/DW PIP INPUT SWAP WIN.SIZE POSITION PIP CH+ PIP CHSPLIT ZOOM ARC ARC (4:3) ARC (16:9) ARC (Zoom) FCR REVIEW R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button Discrete IR Code IR Codes Owner's Manual 43 - LG RU-50PZ61 | Owners Manual - Page 44
to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. Programming a code into a remote mode 1. Test your remote control. To find to see if the component responds properly. If not, repeat from step 2. 44 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 45
013 015 033 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 Brand KENWOOD LG (GOLDSTAR) LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC 032 035 012 015 018 086 087 088 089 100 114 060 093 Owner's Manual 45 - LG RU-50PZ61 | Owners Manual - Page 46
068 HYTEK 053 JANIEL 060 147 JERROLD 061 KATHREIN 108 LEGEND 057 LG 001 LUTRON 132 LUXOR 062 144 MACOM 010 059 063 064 SAMSUNG 123 SATELLITE SERVICE CO 028 035 047 057 085 SCIENTIFIC ATLANTA 032 138 SONY 103 Brand STARCAST SUPER GUIDE TEECOM TOSHIBA UNIDEN UNIDEN Plasma TV - LG RU-50PZ61 | Owners Manual - Page 47
from one of the speakers • Adjust Balance in the Sound menu. (Refer to p.24) Unusual sound from inside the TV • A change in ambient humidity or temperature may result in an unusual noise when the plasma display is turned on or off and does not indicate a fault with the TV. Owner's Manual 47 - LG RU-50PZ61 | Owners Manual - Page 48
the amount of time you will have your new TV. Be sure to turn the power off and and then let it air-dry before you turn on your TV. Cleaning the Cabinet To remove dirt or dust, wipe the use a wet cloth. Extended Absence If you expect to leave your TV dormant for a long time (such as a vacation), it's - LG RU-50PZ61 | Owners Manual - Page 49
913.2 3.9 / 98.6 172.3 / 78.15 1366 x 768 (Dot) Speaker MODEL Width (inches / mm) Height (inches / mm) Depth (inches / mm) Weight (pounds / kg) RU-42PZ61 RU-42PZ71 4.3 / 110 26.4 / 669.3 3.7/95 3.6/90.5 4.5 / 2.03 RU-50PZ61 4.7 / 120 30.7 / 779.4 3.9 / 98.2 5.7 / 2.57 • The specifications - LG RU-50PZ61 | Owners Manual - Page 50
Notes 50 Plasma TV - LG RU-50PZ61 | Owners Manual - Page 51
LG ELECTRONICS, INC. PLASMA TV - U.S. LIMITED WARRANTY Your LG Plasma TV will be repaired or SERVICE IS HANDLED: LABOR and PARTS: 2 YEARS from the Date of Purchase. Your unit will be repaired or replaced with a new, substitute model or factory reconditioned unit, at LGE's option. If repaired, parts - LG RU-50PZ61 | Owners Manual - Page 52
defective unit to the LG®Brand Service Center. Parts and service in accordance with the LGE warranty are LGE's responsibility and will be provided without charge. Other service requirements will be at the owner's expense. If you have problems in obtaining satisfactory warranty service, write or call
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
 |
 |
PLASMA TV
OWNER’S MANUAL
Please read this manual carefully and completely before
operating your TV.
Retain this manual for future reference.
Record model number and serial number of the TV in the
spaces provided below.
See the label attached on the back cover and relate this
information to your dealer if you require service.
Model Number :
Serial Number :
MODELS: RU-42PZ61/71
RU-50PZ61
RU-60PZ61
LG Electronics U.S.A., Inc.