LG WM2801HRA Owner's Manual - Page 20

HOW TO USE THE LED DISPLAY The LED display shows the settings, estimated time remaining, options, and status messages for your washer. When the washer is turned on, the display will illuminate. 1 2 3 4 1 CYCLE COMPLETION INDICATOR This portion of the display shows which stage of the wash cycle is currently underway (LOAD SENSING, WASH, RINSE or SPIN). At the beginning of the cycle, the washer tumbles the load and detects the weight of the clothes. The display will indicate the approximate load size as the number 1 to 4 for 5seconds. (This allows COTTON/NORMAL, ALLERGIENETM, SANITARY course).This allows you to adjust the amount of detergent and other additives for best results and improved efficiency. 2 ESTIMATED TIME REMAINING When the START/PAUSE button is pressed, the washer automatically detects the wash load (weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle. NOTE: The cycle time displayed may appear much longer than that of a top-loading washer. The displayed time is for the complete cycle, rather than just the agitation portion of the cycle, as is typically shown on a top-loading washer. 3 DOOR LOCK INDICATOR Indicates that the door is locked. The washer door will lock while the washer is operating. The door can be unlocked by pressing the START/ PAUSE button to stop the washer. NOTE: If the temperature in the washer is too high, the door cannot be unlocked until the washer has cooled. If the water level is too high, select the DRAIN & SPIN cycle to drain excess water. Do not try to force open the door. 4 DELAY WASH INDICATOR This indicator shows that the washer has been set for DELAY WASH. The washer will start automatically after the set delay time has passed. 20