LG WP600 Owners Manual

LG WP600 Manual

Get LG WP600 PDF manuals and user guides View all LG WP600 manuals
Add to My Manuals
Save this manual to your list of manuals

LG WP600 manual content summary:

  • LG WP600 | Owners Manual - Page 1
    OWNER'S MANUAL LG Digital Signage (Signage webOS Box) Please read this manual carefully before operating your set and retain it for future reference. WP600 WP600-B www.lg.com Copyright © 2024 LG Electronics Inc. All Rights Reserved.
  • LG WP600 | Owners Manual - Page 2
    ENGLISH_Index 2 TABLE OF CONTENTS BASIC 3 --Checking the Accessories 3 --Learning the Buttons 4 GETTING READY 6 --Connecting the IR Sensors 6 CHECKING BEFORE INSTALLATION 7 --Installation Orientation 7 --Installing on a monitor 8 --HDMI connections 9 PRECAUTIONS FOR USE 10 --Dust 10 --
  • LG WP600 | Owners Manual - Page 3
    with your product may vary depending on the model or region. •• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. •• SuperSign Software & Manual -- Visit https://partner.lge.com to download the latest SuperSign software and
  • LG WP600 | Owners Manual - Page 4
    4 Learning the Buttons (The image may be different according to the model.) ENGLISH_Index •• : Turns the power on or off. • • : Displays the current signal and mode. •• : Moves left and right. • • : Adjusts the up and down. • • : Accesses the main menus, or saves your input and exits the
  • LG WP600 | Owners Manual - Page 5
    ENGLISH_Index 5 Front Panel Rear Panel LED Indicator
  • LG WP600 | Owners Manual - Page 6
    ENGLISH_Index 6 GETTING READY Connecting the IR Sensors Connecting the cable to the product allows it to receive signals from the remote control.
  • LG WP600 | Owners Manual - Page 7
    ENGLISH_Index 7 CHECKING BEFORE INSTALLATION We are not responsible for product damage caused by failure to follow the guide. Installation Orientation Install the set using the screws supplied as accessories. 266.5 mm (10.4 inches) 139 mm (5.4 inches)
  • LG WP600 | Owners Manual - Page 8
    a monitor •• For some monitors only. Depending on the monitor, installation may not be possible. •• The image may be different according to the model. 1 Align the WP600/WP600-B along the four screw holes on the rear of the set and attach it to the rear of the set using the four screws provided
  • LG WP600 | Owners Manual - Page 9
    9 HDMI connections Use an HDMI cable to connect to the WP600/WP600-B. ENGLISH_Index
  • LG WP600 | Owners Manual - Page 10
    ENGLISH_Index 10 PRECAUTIONS FOR USE Dust The warranty will not cover any damage caused by using the product in an excessively dusty environment. Afterimage •• After-image appears when the product is turned off. -- Pixels may be damaged rapidly if a still image is displayed on the screen for a long
  • LG WP600 | Owners Manual - Page 11
    ENGLISH_Index 11 •• Recommended Usage Condition 1 Change the background color and text color at equal intervals. -- Afterimages occur less when the colors to be changed are complementary to one another. A A ITO or MoTi Pixel Layer 2 Switch the screen at equal time intervals. -- Take caution,
  • LG WP600 | Owners Manual - Page 12
    12 PRODUCT SPECIFICATIONS Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product. ENGLISH_Index Input/Output Ports Resolution Recommended Resolution HDMI1,2 / DisplayPort: 3840 x 2160 @ 60 Hz Max
  • LG WP600 | Owners Manual - Page 13
    13 ENGLISH_Index Wireless module (LGSBWAC92) Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range (MHz) Output power (Max.) (dBm) 2400 to 2483.5 18 5150 to 5725 18 5725 to 5850 18 Bluetooth Frequency range (MHz) Output power (Max.) (dBm) 2400 to 2483.5 8 •• As band
  • LG WP600 | Owners Manual - Page 14
    1920 x 1080 3840 x 2160 3840 x 2160 Horizontal frequency (kHz) 37.879 48.363 44.772 63.981 65.29 67.5 67.5 135 HDMI/DisplayPort (DTV) Support Mode Resolution 480/60p 576/50p 720/50p 720/60p 1080/50i 1080/60i 1080/50p 1080/60p 1080/60p 2160/30p 2160/50p 2160
  • LG WP600 | Owners Manual - Page 15
    ENGLISH_Index 15 LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator,
  • LG WP600 | Owners Manual - Page 16
    of the product are located on the back and on one side of the product. Record them below in case you ever need service. Supplier's Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address E-mail 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632
  • LG WP600 | Owners Manual - Page 17
    USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read the user manual before using this product to ensure safe and convenient use. webOS 6.0 www.lg.com
  • LG WP600 | Owners Manual - Page 18
    24 [Video Wall] [On/Off Scheduler] [SI Server Setting] [Pro:Centric] [Server Setting] [Fail Over] [Status Mailing] [Play via URL] [Setting Data Cloning] [Sync Mode] [LG ConnectedCare] [Multi Screen] [Leveler Tool] [Office Meeting Mode] [webOS Partners]
  • LG WP600 | Owners Manual - Page 19
    MANAGER 66 --Web Login 66 --Content Manager 66 [Player] [Scheduler] [Editor] --Group Manager 2.0 74 --Gallery Mode 77 --Screen Share 78 How to Use [Screen Share] --LG Presenter 79 How to use
  • LG WP600 | Owners Manual - Page 20
    Manual Calibration] IR CODE 85 CONTROLLING MULTIPLE PRODUCTS 87 --Connecting cables 87 --Communication Parameter 88 --Command Reference List 89 --Transmission/Reception Protocol 94 TROUBLESHOOTING , please visit https://opensource.lge. com. LG Electronics will also provide open source code to
  • LG WP600 | Owners Manual - Page 21
    ENGLISH 5 SAFETY PRECAUTIONS The safety precautions are intended to prevent unexpected danger or harm by helping the user to use the product safely and for its intended purpose. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
  • LG WP600 | Owners Manual - Page 22
    WARNING •• Use only the power cord or AC adapter provided or approved by LG Electronics, Inc. If you use another power cord, make sure that it is faulty in any way, please contact the manufacturer or the nearest authorized service center for a replacement. •• Operate the display only from a power
  • LG WP600 | Owners Manual - Page 23
    ENGLISH 7 •• If water or any foreign substance goes inside the product, disconnect the power cord immediately and contact the service center. -- Otherwise, this may cause a fire or electric shock due to damage to the product. •• Keep the power cord or AC adapter away from any
  • LG WP600 | Owners Manual - Page 24
    kg (220.4 lbs)) -- If use the damaged product again, contact the service center because it can cause electric shock or fire. •• Do not hold it upside down while holding only the stand. (It is for stand supported models only.) -- This may cause stand warping, panel damage and other types
  • LG WP600 | Owners Manual - Page 25
    It can cause injury to human, problem to product and damage the display. earthquake. -- You must refer to the manual provided. •• Prevent Children from climbing or unplug the power cord and contact the service center. -- If you continue to safely and securely support the product to remain in place
  • LG WP600 | Owners Manual - Page 26
    's picture quality, life cycle, and appearance. Please check with service engineer before installing. Please do not install the product in places •• Install the product on a flat and stable place that is large enough to support the product. -- If the product is dropped, you may be injured or the
  • LG WP600 | Owners Manual - Page 27
    dust, it can cause fire or product damage. •• When you need to clean the inside of the product, you must contact the service center. -- Otherwise, cleaning without support may cause a fire, electric shock, or damage to the product. •• When cleaning the product, unplug the power cord and wipe gently
  • LG WP600 | Owners Manual - Page 28
    . Switch it off immediately, unplug it from the power outlet and contact the service center. -- Otherwise, the product may cause fire or electric shock. •• Do impact on the product or screen. -- It can cause injury to human, problem to product and damage the screen. •• If you can smell smoke or other
  • LG WP600 | Owners Manual - Page 29
    use without taking proper measures, electrical shock or fire can occur. Contact the service center. •• Keep small accessories out of the reach of children. -- If at the product or screen. -- It can cause injury to human, problem to product and damage the screen. •• All the power sources must be
  • LG WP600 | Owners Manual - Page 30
    ENGLISH 14 Precautions for Using the Remote control WARNING •• Avoid places with high humidity. -- It may cause electrical shock or damage the product. •• Do not expose batteries to excessive heat, such as direct sunlight, open fireplace, and electric heaters. -- It may cause fire and you may be
  • LG WP600 | Owners Manual - Page 31
    ENGLISH 15 Precautions for Experiencing Image Retention •• Displaying a still image for a prolonged period of time may cause damage to the screen, resulting in image retention. Most third-party products have the same issue. The resulting damage is not covered by the product warranty. -- Use a
  • LG WP600 | Owners Manual - Page 32
    the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries control sensor on the monitor. •• Some features of the remote control may not be supported in certain models. •• The product's internal and external batteries should not be exposed
  • LG WP600 | Owners Manual - Page 33
    . (Volume Up/Down Button) Adjusts the volume level. Selects the screen size. Automatically adjusts picture position and minimizes image instability. (This is supported only for the RGB input.) (MUTE) Mutes all sounds. Adjusts the brightness of the display. Moves to the previous or next screen.
  • LG WP600 | Owners Manual - Page 34
    . Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. SuperSign menu key. (This function is not supported.) , After selecting the menu, select and adjust functions. (BACK) Returns to the previous level. Closes the menu. Allows you to control various
  • LG WP600 | Owners Manual - Page 35
    you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the * feature. * : a feature that enables a PC to recognize devices attached by the user
  • LG WP600 | Owners Manual - Page 36
    -- High Speed HDMI®/™ Cable with Ethernet •• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to manually change the default audio output to HDMI. •• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode. •• You
  • LG WP600 | Owners Manual - Page 37
    ENGLISH 21 Connecting Multiple Monitors •• Images may differ according to the model. To use multiple products connected to each other, connect one end of the signal input cable to the HDMI/DP Out connector of first monitor and connect the other end to the HDMI/DP In connector of the second monitor.
  • LG WP600 | Owners Manual - Page 38
    to DP 1.1a standard or higher. •• Daisy chaining the video output may be limited depending on the performance of the input device that supports HDCP. NOTE •• Software-related content may be changed without prior notice due to upgrades of the product functions. •• Some features described in the
  • LG WP600 | Owners Manual - Page 39
    the focus does not move. •• Some QR code apps on mobile devices may not work. (You can access the page to download manuals by visiting the provided address.) [Content Manager] •• [Player]: Play a variety of content including images, videos, and SuperSign content. •• [Scheduler]: Manage schedules for
  • LG WP600 | Owners Manual - Page 40
    ENGLISH 24 Ez Setting [Video Wall] [Ez Setting] [Video Wall] Set Video Wall options to create a wide visual canvas. •• [Tile Mode]: Turn [Tile Mode] on or off. •• [Tile Mode Settings]: Display a single integrated screen on multiple Signage monitors. •• [Simple Configuration]: automatically sets [
  • LG WP600 | Owners Manual - Page 41
    ENGLISH 25 [On/Off Scheduler] [Ez Setting] [On/Off Scheduler] Set a schedule to use your signage by time and day of the week. •• [On/Off Time Setting]: Set on/off times for each day of the week. •• [Holiday Setting]: Set holidays by date and by day of the week. [SI Server Setting] [Ez Setting] [SI
  • LG WP600 | Owners Manual - Page 42
    connect your signage to a SuperSign server. •• CMS Server •• Control Server •• LG Pro:Cloud Server [Fail Over] [Ez Setting] [Fail Over] Set the regular intervals, this feature will play back the file. (OLED model is not supported.) --> Capture time Interval: The time interval can be set to 30 min,
  • LG WP600 | Owners Manual - Page 43
    movement or shock caused by the external environment, an e-mail is sent to you. •• Only SMTP ports 25, 465, and 587 are supported. •• The occurrence of internal input switches, excluding external input switches (RC, RS232C, SuperSign), are considered as Fail Over Status. •• One email containing
  • LG WP600 | Owners Manual - Page 44
    28 ENGLISH [Play via URL] [Ez Setting] [Play via URL] Play content you want to play automatically through the built-in web browser. •• [URL Loader]: Turns [Play via URL] on or off. •• [Set URL]: Enter the URL address to display automatically. •• [Preview]: Preview your desired website by accessing
  • LG WP600 | Owners Manual - Page 45
    for fault diagnosis and prediction service. •• [Install]: Installs the [LG ConnectedCare] solution. 1) [ENTER ACCOUNT NUMBER]: Enters the 6-digit account number to install the [LG ConnectedCare] solution. -- Account Number: The number assigned when the [LG ConnectedCare] solution is registered
  • LG WP600 | Owners Manual - Page 46
    on a single screen. PIP Mode PBP Mode 3-Screen Split Mode 4-Screen Split Mode NOTE •• In multi-screen mode, the DP daisy chain feature is not supported. •• The number of split screens you can have may vary depending on the model. Selecting Screen Layout When you enter multi-screen mode without
  • LG WP600 | Owners Manual - Page 47
    up to 30 frames. •• There may be additional restrictions on media depending on the codec combination. •• Some Full HD models only support PIP and PBP modes, and the maximum supported resolution is 1920 x 1080. Playing Videos on Split Screens Press the button on the upper right of each split screen
  • LG WP600 | Owners Manual - Page 48
    ENGLISH 32 [Leveler Tool] [Ez Setting] [Leveler Tool] You can check the horizontal and vertical level status when installing the product. Check the tilt of the product •• The bubble and angle indicator in the leveler show the degree of tilt of the product. •• The leveler and angle indicator on the
  • LG WP600 | Owners Manual - Page 49
    closing the app switches the input back to the previous status. Features supported by input auto switching are external input, SuperSign content, the SI If using the [Meeting Room Name] and [Time] items in the [Meeting Guide Screen], and if using the downloaded image as the No Signal image, it is
  • LG WP600 | Owners Manual - Page 50
    ENGLISH 34 General [Language] [General] [Language] You can select the menu language to be displayed on the screen. •• [Menu Language]: Sets the language of your Signage monitor. •• [Keyboard Language]: Sets the language of the keyboard displayed on the screen. [System Information] [General] [System
  • LG WP600 | Owners Manual - Page 51
    ENGLISH 35 [Power] [General] [Power] Power-related feature settings [No Signal Power Off (15 Min)] Set whether to use the 15 Min Auto Off feature. •• You can set this option to [On] or [Off]. •• If you set this feature to [On], the product turns off after it's remained in No Signal status for 15
  • LG WP600 | Owners Manual - Page 52
    ENGLISH 36 [PM Mode] •• [Power Off (Default)]: Set the normal DC off mode. •• [Sustain Aspect Ratio]: The PC retains the Extended Display Identification Data (EDID) even when the power is off. •• [Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), or
  • LG WP600 | Owners Manual - Page 53
    available wireless Internet networks. •• [Add a Hidden Wireless Network]: You can add a wireless network by manually typing in its name. •• [Connect via WPS PBC]: Press the button on the wireless router that supports PBC to easily connect to the router. •• [Connect via WPS PIN]: Enter the PIN number
  • LG WP600 | Owners Manual - Page 54
    connection without a wireless router and use wireless Internet. •• The SoftAP and Screen Share features cannot be used at the same time. •• On models that support Wi-Fi dongles, the SoftAP menu is enabled only when a Wi-Fi dongle is connected to the product. •• Wi-Fi Channel: You can directly select
  • LG WP600 | Owners Manual - Page 55
    ENGLISH 39 [Ping Test] Check your network status with the ping test. [Port Control] Unused ports can be blocked for network security. [Connection Domain] Change domain for checking network connection. NOTE •• A reboot is recommended for the settings to be applied properly.
  • LG WP600 | Owners Manual - Page 56
    terms of service. For details, contact your ISP. •• LG is not responsible for any malfunction of the display or Internet connection failures due to communication errors/ malfunctions associated with your Internet connection or other connected equipment. •• LG is not responsible for problems within
  • LG WP600 | Owners Manual - Page 57
    as Wi-Fi devices. •• The wireless network service may run slowly depending on the surrounding wireless a wireless router, a router that supports wireless connection is necessary; the wireless devices correctly by referring to their user guides before configuring the network connection. •• The
  • LG WP600 | Owners Manual - Page 58
    screen, the screen location moves by 4 pixels in a regular order. (This item is inactivated when the current input is No Signal.) (It only supports the models for exterior use.) •• [White Wash]: Displays a white pattern to remove image sticking. •• [User Image]: Plays the desired image from a USB
  • LG WP600 | Owners Manual - Page 59
    file in the "ISM" folder on your USB storage device. •• Delete the existing contents stored on the internal memory before downloading a new video file. •• Supported video file formats: "MP4", "AVI", "MKV", "MPEG", "TS" •• You can download only 1 video. •• If a video is deleted or does not exist, the
  • LG WP600 | Owners Manual - Page 60
    44 ENGLISH * How to reset or delete User Image / User Video •• Reset using [Admin] [Factory Reset] •• Open the Player app > Click "Delete" button at the top right of the screen > Delete downloaded image / video [Screen Fault Detection] •• The screen fault detection feature determines whether
  • LG WP600 | Owners Manual - Page 61
    /Off Toggle): enables the Beacon feature. •• The LG Beacon/iBeacon/Eddystone Type Beacon features are supported. •• iBeacon -- Beacon UUID (hex): Set the apply the Beacon settings. NOTE •• Some models do not support background screening services in iOS. •• A reboot is recommended for the settings to
  • LG WP600 | Owners Manual - Page 62
    •• Depending on the model, it can be displayed as [PC/OPS Control]. •• Depending on the supported interface, the sub-menu of [Control Interface Selection] may be different. •• The PC products that support the power control are MP500/MP700, and you have to purchase them separately if necessary. •• If
  • LG WP600 | Owners Manual - Page 63
    the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage. •• [Device ID]: Set the ID of the device connected via CEC wiring. Display power (On/Off) sync] (Depending on model) (This function is only supported by the Signage box) •• This is a function to control the power of
  • LG WP600 | Owners Manual - Page 64
    48 ENGLISH [Crestron] (Depending on model) [Crestron Connected] V1 •• This function enables synchronization with applications provided by Crestron. •• [Server]: This menu sets the server's IP address for the network connection with the server (equipment provided by Crestron). •• [Port] (1024~
  • LG WP600 | Owners Manual - Page 65
    the setting is changed. [Quiet Mode] This mode is used to reduce the noise of the fan. Adjusted to the set fan control and brightness. [LG promota] This feature allows connection of promota app on mobile device. For more information on how to use it, please visit the promota website (https
  • LG WP600 | Owners Manual - Page 66
    School], [Control Room]: displays the mode optimized for the installing environment. •• [Calibration]: Allow an expert, or anyone who loves picture quality, to manually tune to the best picture quality. NOTE •• The type of [Picture Mode] you can select may vary depending on the model or input signal
  • LG WP600 | Owners Manual - Page 67
    ENGLISH 51 [Customize] •• [Backlight]: Adjust the brightness of the screen by adjusting the brightness of the backlight. The closer the value is to 100, the brighter the screen is. •• [OLED Light]: Adjusts the brightness of the OLED panel to control the brightness of the screen. •• [LED Light]:
  • LG WP600 | Owners Manual - Page 68
    ENGLISH 52 •• [Picture Option]: Customize the picture options. -- [Noise Reduction]: Remove randomly popping dots to make the picture look clearer. -- [MPEG Noise Reduction]: Reduce the noise generated in the process of creating a digital video signal. -- [Smooth Gradation]: Reduces step-shaped
  • LG WP600 | Owners Manual - Page 69
    is enabled, the PIP mode of the multi-screen is unavailable. NOTE •• Depending on the model, the automatic screen rotation feature may not be supported. [External Input Rotation] •• This feature rotates the screen clockwise. •• You can set this feature to Off/90/180/270. •• Setting External Input
  • LG WP600 | Owners Manual - Page 70
    . •• HDMI input port 1, 2 is best suited for high definition videos that are 4K@60 Hz (4:4:4, 4:2:2). However, video or audio may not be supported depending on the specifications of the external device. If this is the case, please connect the device to a different HDMI port. •• This feature may not
  • LG WP600 | Owners Manual - Page 71
    55 ENGLISH No. Item Description 1 [Tiling Type] Select and set the mode according to the installation type of your Signage. •• Stand-alone: Select and use this mode when you use only one unit. •• Video Wall: Select and use this mode when using two or more multi-screen configurations. This
  • LG WP600 | Owners Manual - Page 72
    needs time to recognize the pattern of the content. (The time may vary depending on the duration of the content.) •• The [Screen Shift] feature is supported only for the stand-alone configuration or for use in a single DP daisy chain. That is, if [Tile Mode] is enabled, the [Screen Shift] feature
  • LG WP600 | Owners Manual - Page 73
    manually, According to the user's installation environment. -- [Highlight] : Maximize product performance to increase content delivery. Provide high visibility even in direct sunlight and bright environments. -- [Basic] : Provide standard brightness and picture quality of LG . -- BLU Manual On/Off:
  • LG WP600 | Owners Manual - Page 74
    signal is entered. Even if the monitor's picture mode has been changed by the HDMI IT Contents feature, you can change the picture mode again manually. As this has a higher priority than the picture mode set by the user, the existing picture mode may be changed when the HDMI signal changes
  • LG WP600 | Owners Manual - Page 75
    to music. •• [Game]: Optimize sound for playing video games. [Balance] •• [Balance]: Adjust the output volume for the left speaker and the right speaker. [Equalizer] •• [Equalizer]: Manually adjust sound by using the equalizer. [Reset] •• [Reset]: Resets sound settings.
  • LG WP600 | Owners Manual - Page 76
    may automatically attempt to reconnect to the Signage monitor when it is turned on. •• It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting. •• Press Device Selection to view the devices that are or that can be connected and
  • LG WP600 | Owners Manual - Page 77
    ENGLISH 61 [Audio Out] [Sound] [Audio Out] •• [Off]: Disables the use of [Audio Out]. (No audio outputted.) •• [Variable]: You can specify an output range for the external audio device connected to the monitor and adjust the volume within the range. You can change the volume of an external audio
  • LG WP600 | Owners Manual - Page 78
    ENGLISH 62 [Digital Sound Output] [Sound] [Digital Sound Output] Enables you to configure the settings for Export Digital Sound. • • [Sound] This can be set if [Sound Out] is optical digital/HDMI ARC. •• Sound effect output may not work if using Pass Through. •• The codec which is being
  • LG WP600 | Owners Manual - Page 79
    ENGLISH 63 [OSD Lock] This feature enables you to configure the OSD lock feature so that settings or content cannot be changed. •• Press and hold the Settings key for at least 10 seconds and enter password to access the settings menu in OSD Lock. [IR Operation Lock] •• If you set this feature to [
  • LG WP600 | Owners Manual - Page 80
    a separate confirmation procedure. •• Update Detection Notification: Sets whether to Enable/Disable the update detection notification. •• CHECK FOR UPDATES: Manual checks for available updates in the server. This feature is available only when network is connected. [Enterprise Settings] •• Enter
  • LG WP600 | Owners Manual - Page 81
    ENGLISH 65 [IDPS Settings] •• IDPS can be activated or deactivated by choosing On/Off [Install Admin Certificate] •• Administrator must install administrator certificate before applying administrator IDPS rule. [Update IDPS Rule Package] •• In addition to the default rules, new security rules set
  • LG WP600 | Owners Manual - Page 82
    player feature enables you to play/manage contents of video, image, template, SuperSign and playlist in an integrated way. (The OLED models do not support the playback and management of image content and template content.) [Continuous Play] 1 Select your desired type of content from the tab on the
  • LG WP600 | Owners Manual - Page 83
    ENGLISH 67 [Delete] 1 Select your desired type of content from the tab on the left and click [Delete] in the upper right-hand corner of the screen. 2 Select the content you wish to delete. 3 Click [Delete] in the upper right-hand corner of the screen. 4 You can see that the content has been deleted
  • LG WP600 | Owners Manual - Page 84
    ENGLISH 68 [Scheduler] (Scheduler) The Content Manager app's scheduler feature enables certain content to be played at a scheduled time through a playlist or external input. [Creating a Schedule] 1 Click [New Schedule] in the upper right-hand corner of the screen. 2 Choose between [Playlist] and [
  • LG WP600 | Owners Manual - Page 85
    ENGLISH 69 [Delete Schedule] 1 Click [DELETE] in the upper right-hand corner of the screen. 2 Select the schedules you wish to delete. 3 Click [DELETE]. 4 Check that the schedules have been deleted. [Calendar View] 1 When you have registered schedules, click [Calendar View]. 2 You can see that the
  • LG WP600 | Owners Manual - Page 86
    -1, MPEG-2 MPEG-1 Layer I, II, MPEG-1 Layer III (MP3) MPEG-1, MPEG-2 Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM •• Dolby AC-4: Some models may not be supported. Maximum transmit ratio Full HD movie ULTRA HD movie (UHD models only.) H.264 1920 x 1080@60P BP/MP/[email protected] 40Mbps HEVC 1920 x 1080@60P
  • LG WP600 | Owners Manual - Page 87
    only): 3840 X 2160, 4096 X 2160 •• Some HEVC-encoded ULTRA HD videos other than the content officially provided by LG Electronics may not be played. •• Some codecs can be supported after a software upgrade. Extension .mkv, .mp4, .ts Video Audio Codec H.264/AVC, HEVC Dolby Digital, Dolby Digital
  • LG WP600 | Owners Manual - Page 88
    may not be recognized. •• Please connect a USB storage device with the cable offered by the device maker. •• Some USB storage devices may not be supported or operated smoothly. •• File alignment methods of the USB storage device is similar to Windows and filenames can include up to 100 English
  • LG WP600 | Owners Manual - Page 89
    ] feature does not work, turn the hard disk off and on again to make it work properly. •• USB storage devices (USB 2.0 or below) are also supported. However, they may not work properly in the videos list. •• A maximum of 999 folders or files can be recognized under one folder. •• When distributing
  • LG WP600 | Owners Manual - Page 90
    ENGLISH 74 Group Manager 2.0 This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the
  • LG WP600 | Owners Manual - Page 91
    ENGLISH 75 [GROUP MANAGEMENT] •• Creating a New Group 1. Click [Add New Group]. 2. Enter a group name. 3. Click [Add Device], select the devices you wish to add to the group, and add them. 4. Click [Done], and you will see that a new group has been created. •• Editing a Group 1. Click the
  • LG WP600 | Owners Manual - Page 92
    ENGLISH 76 [Setting Data Cloning] 1 Select your desired group and click Clone. 2 Check that the data have been copied on the slave sets. [Content Distribute] 1 Select the type of content you wish to distribute (Schedules or Playlists). 2 Select the content you wish to distribute. 3 Select the group
  • LG WP600 | Owners Manual - Page 93
    off the background music through [THEME SOUND]. •• A total of 5 themes ([Sunny Day], [Rainy Day], [Art Gallery], [Art Photos], and [Colorful Spring]) are available, and the supported images are as follows.
  • LG WP600 | Owners Manual - Page 94
    connection such as WiDi or Miracast. How to Use [Screen Share] [Screen Share] 1 Connect according to the instructions provided by the guide that can be accessed through the CONNECTION GUIDE button in the upper right. 2 Once the connection is established, Screen Share between the user device and the
  • LG WP600 | Owners Manual - Page 95
    On Signage LG Presenter On PC Enter the URL provided on the Signage into the address bar of your web browser. NOTE •• This feature may not be supported depending on the product. •• Only PC screen sharing is supported. Audio sharing is not supported. •• Some web browsers do not support screen
  • LG WP600 | Owners Manual - Page 96
    the status of the display through the Web browser. This function is available for PCs and mobile devices. Different features are supported depending on the product. Function •• [Dashboard]: Display a summary of the product's status and provides links to each page. •• [Display & sound]: Provides
  • LG WP600 | Owners Manual - Page 97
    ENGLISH 81 Picture ID AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with RS-232CIN RS-232C IN RS-232C IN an IR
  • LG WP600 | Owners Manual - Page 98
    to a PC with a USB cable (Type A to Type B) allows you to control the connected PC by touching the screen of the product. For a PC that supports USB-C, use a USB-C cable to connect this product to the PC and control the PC using the touch screen. If your product is equipped with
  • LG WP600 | Owners Manual - Page 99
    the target. -- Please set the target to 3,000K in the broadcasting station environment. -- [Reference RGB]: Saves and resets the currently set Manual Calibration value during Smart Calibration. 3 With [START SMART CALIBRATION], you can correct the color/brightness. 4 If you set the [Schedule Setting
  • LG WP600 | Owners Manual - Page 100
    ENGLISH 84 [Manual Calibration] You can manually adjust the color of the selected location. •• [Screen Split]: Set the manual adjustment area. •• [Calibration Position]: Select the manual adjustment location. Screen Split: 4, Calibration Position: 3 Screen Split: 9, Calibration Position: 5
  • LG WP600 | Owners Manual - Page 101
    HDMI/USB function. •• Some key codes may not be supported depending on the model. Code (Hex) 08 C4 C5 95 0B 10 11 12 13 14 15 16 17 18 19 02 03 E0 E1
  • LG WP600 | Owners Manual - Page 102
    ENGLISH 86 Code (Hex) 43 99 40 41 06 07 44 28 7B 5B 72 71 63 61 5F 3F 7C 97 96 Function (Settings/Menu) Auto Configuration (Up) (Down) (Right) (Left) (OK) (BACK) Tile Exit Picture ID On (red) Picture ID Off (green) Yellow Blue W.Bal (S.Menu) (Home) Swap Mirror Remarks Remote control button Remote
  • LG WP600 | Owners Manual - Page 103
    ENGLISH 87 CONTROLLING MULTIPLE PRODUCTS •• This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being
  • LG WP600 | Owners Manual - Page 104
    ENGLISH 88 Communication Parameter Baud Rate: 9600 BPS Data Length: 8 bits Parity Bit: None Stop Bit: 1 bit Flow Control: None Communication Code: ASCII NOTE •• When using 3-wire connections (non-standard), an IR daisy chain cannot be used. •• Be sure to only use the provided gender to connect
  • LG WP600 | Owners Manual - Page 105
    89 ENGLISH Command Reference List 01 [Power] 02 Select Input 03 [Aspect Ratio] 04 [Brightness Control] 05 [Picture Mode] 06 [Contrast] 07 [Brightness] 08 [Sharpness] 09 [Color] 10 [Tint] 11 [Color Temperature] 12 [Balance] 13 [Sound Mode] 14 [Mute on] 15 Volume Control 16 [Current
  • LG WP600 | Owners Manual - Page 106
    ENGLISH 90 26 [Software Version] 27 [White Balance] Red Gain 28 [White Balance] Green Gain 29 [White Balance] Blue Gain 30 [White Balance] Red Offset 31 [White Balance] Green Offset 32 [White Balance] Blue Offset 33 [Backlight] 34 [Screen Off] 35 [Tile Mode] 36 Check [Tile Mode] 37 [Tile ID] 38 [
  • LG WP600 | Owners Manual - Page 107
    91 ENGLISH 51 [Power On Status] Wired [Wake On LAN (Networked 52 Standby Mode)] 53 [Screen Rotation] 54 [Time Sync] 55 [Contents Sync] 56 [LAN Daisy Chain] 57 [External Input Rotation] 58 [Beacon] 59 [Brightness Scheduling] Mode 60 [Brightness Scheduling] 61 [Multi Screen] Mode & Input
  • LG WP600 | Owners Manual - Page 108
    92 ENGLISH 75 [Play Backup Content] 76 [Digital Audio Input] 77 [Booting Logo Image] 78 [SoftAP] 79 [Natural Size] 80 Play Saved Internal Media 81 [No Signal Image] 82 [Audio Out] [DPM (Standby Mode) Wake Up 83 Control] 84 Check [Fan] Failure 85 [Apply to all inputs] 86 [Timer Power On] 87 [Timer
  • LG WP600 | Owners Manual - Page 109
    Video Position s n, 8f 129 [SI Server Setting] s n, ca * Note Commands may not work when there is no external input used. * Some commands may not be supported on some models. 00 to 01 Data (Hexadecimal) 00 to 01 FF 00 to 01 00 to 02 See [HDR Picture Mode] 00 to 01
  • LG WP600 | Owners Manual - Page 110
    mode via RS-232C, you can check the value currently set for the relevant feature (not applicable to some features). * Some commands may not be supported on some models.
  • LG WP600 | Owners Manual - Page 111
    W, webOS Player returns NG. * If it says "Read" from the IDB mode, it will respond as a PC Label type. * The SI App only supports Set operations over RS232C. 03. [Aspect Ratio] (Command: k c) Adjusts the aspect ratio of your monitor. Transmission (k)(c)( )(Set ID)( )(Data)(Cr) Data 02: [Full
  • LG WP600 | Owners Manual - Page 112
    ENGLISH 96 05. [Picture Mode] (Command: d x) Selects a picture mode. Transmission (d)(x)( )(Set ID)( )(Data)(Cr) Data 00: [Mall/QSR] 01: [General] 02: [Gov./Corp.] 03: [Transportation] 04: [Education] 05: [Expert1] 08: [Auto Power Save] 11: [Calibration] 12: [Hospital] Acknowledgment (x)(
  • LG WP600 | Owners Manual - Page 113
    10. [Tint] (Command: k j) Adjusts the screen tints. Transmission (k)(j)( )(Set ID)( )(Data)(Cr) Data 00-64: Tint Red 50-Green 50 Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) 11. [Color Temperature] (Command: x u) Adjusts the screen color temperature. Transmission (x)(u)( )(Set ID)( )(Data)(Cr)
  • LG WP600 | Owners Manual - Page 114
    product's release year. * Enter "fa [Set ID] ff" to view Clock 1 (year/month/day) settings. 2. When Setting Auto Time Data1 00: [Auto] 01: [Manual] * To view the set value of the Auto time, enter "fa [Set ID] 00 ff". Acknowledgment 1. (a)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x) 2. (a)( )(Set
  • LG WP600 | Owners Manual - Page 115
    Data)(Cr) Data IR_KEY_CODE Acknowledgment (c)( )(Set ID)( )(OK/NG)(Data)(x) * For key codes, see IR Codes. * Some key codes may not be supported depending on the model. 26. [Software Version] (Command: f z) Checks the software version of the product. Transmission (f)(z)( )(Set ID)( )(Data)(Cr) Data
  • LG WP600 | Owners Manual - Page 116
    ENGLISH 100 27. [White Balance] Red Gain (Command: j m) Adjusts the red gain value for white balance. Transmission (j)(m)( )(Set ID)( )(Data)(Cr) Data 00-FE: Red Gain 0-254 FF: Checks red gain value Acknowledgment (m)( )(Set ID)( )(OK/NG)(Data)(x) 30. [White Balance] Red Offset (Command: s x)
  • LG WP600 | Owners Manual - Page 117
    101 ENGLISH 33. [Backlight] (Command: m g) Adjusts the backlight brightness. Transmission (m)(g)( )(Set ID)( )(Data)(Cr) Data 00-64: Backlight 0-100 Acknowledgment (g)( )(set ID)()(OK/NG)(Data)(x) 34. [SCREEN OFF] (Command: k d) Turns off/off the screen. Transmission (k)(d)( )(Set ID)( )(Data)(Cr
  • LG WP600 | Owners Manual - Page 118
    signals may not be available for all models. * The data number (N) may vary depending on the model. (The data number depends on the number of supported input signals.) * This feature operates as the last input, and
  • LG WP600 | Owners Manual - Page 119
    ) Data 1 00: Screen Fault Detection result NG 07: Screen Fault Detection result OK * When screen Fault Detection is set to Off or not supported, execution results are rendered "NG." Data 16(for checking the humidity value) Data 1 0~100: Reads the %RH value of the current humidity (indicated
  • LG WP600 | Owners Manual - Page 120
    ] 90: [User Image] 91: [User Video] Acknowledgment (p)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. * "02: [Orbiter]" is not supported while "91: [User Video]" is turned on.
  • LG WP600 | Owners Manual - Page 121
    Data1 is 81, Data2 DNS address FF: D isplays the temporary DNS address. * If Data1 is 82, Data2 80: A pplies the temporary IP mode (Auto/ Manual), subnet mask, and gateway. 81: A pplies the temporary DNS address FF: Information on the current network (IP, subnet gateway and DNS) * An example of
  • LG WP600 | Owners Manual - Page 122
    ENGLISH 106 54. [Time Sync] (Command: s n, 16) Sets Time Sync. Transmission (s)(n)( )(Set ID)( )(1)(6)( )(Data)(Cr) Data 00: [Off] 01: [On] * This feature only works when the monitor is in Master mode. * This feature does not work if the current time is not set. Acknowledgment (n)( )(Set ID)( )(
  • LG WP600 | Owners Manual - Page 123
    )( )(Data1)(Data2)(Data3) (Data4)(Data5)(x) * This feature may not be available for all models. * Only the input modes supported by the model works. * This feature operates as the last input, and supports data in DTV format. * When the Read operation is performed, 00 is returned if it is not for an
  • LG WP600 | Owners Manual - Page 124
    ENGLISH 108 62. [Aspect Ratio] (Multi screen) (Command: x d) Controls the aspect ratio of Multi Screen. Transmission (x)(d)( )(Set ID)( )(Data1)( )(Data2)(Cr) Data1 01: Controls the Main input 02: Controls the Sub1 input 03: Controls the Sub2 input 04: Controls the Sub3 input Data2 00: Full
  • LG WP600 | Owners Manual - Page 125
    69. [Holiday Setting] (Command: s n, 9b) Sets holidays. Transmission 1. (s)(n)( )(Set ID)( )(9)(b)( ) (Data1)( )(Data2)( )(Data3)( ) (Data4)( )(Data5)( )(Data6)(Cr) 2. (s)(n)( )(Set ID)( )(9)(b)( )(Data1)( )(Data2)(Cr) 3. (s)(n)( )(Set ID)( )(9)(b)( )(Data1)(Cr) 1. Setting a Holiday Data1 Start year
  • LG WP600 | Owners Manual - Page 126
    ENGLISH 110 70. [UPnP] (Command: s n, 9c) Sets UPnP.mode. Transmission (s)(n)( )(Set ID)( )(9)(c)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(9)(c)(Data)(x) * This feature may not be available for all models. * Changing UPnP mode results in a reboot. 73. [Wi-Fi
  • LG WP600 | Owners Manual - Page 127
    75. [Play Backup Content] (Command: s n, a1) When there is no input signal, this feature automatically plays the content stored in the device or runs the set app. Transmission 1. (s)(n)( )(Set ID)( )(a)(1)( )(Data1)(Cr) 2. (s)(n)( )(Set ID)( )(a)(1)( )(Data1)(Data2)(Cr) 1. Disabling Play Backup
  • LG WP600 | Owners Manual - Page 128
    ENGLISH 112 79. [Natural Size] (Command: s n, a5) Sets the Natural Size feature. Transmission (s)(n)( )(Set ID)( )(a)(5)( )(Data)(Cr) Data 00-64: Natural Size 0 - 100 Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(5)(Data)(x) * This feature may not be available for all models. 82. [Audio Out] (
  • LG WP600 | Owners Manual - Page 129
    113 ENGLISH 85. [Apply to all inputs] (Command: s n, 52) Apply the video mode and low value of the current input to the same video value of all inputs. Transmission (s)(n)( )(Set ID)( )(5)(2)( )(Data)(Cr) Data 01: Apply Acknowledgment (n)( )(Set ID)( )(OK/NG)(5)(2)(Data)(x) * This feature may not
  • LG WP600 | Owners Manual - Page 130
    114 ENGLISH 87. [Time to OFF] Scheduling (Command: f e) Sets Off Timer settings. Depending on the model, the number of schedules for Timer Power Off can be either 16 or 21. Transmission (f)(e)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) Data1 1. To f1h ~ ffh, a1h ~ a6h (data reading) F1 ~ FF:
  • LG WP600 | Owners Manual - Page 131
    ENGLISH 91. Change SetID (Command: j x) Changes and checks SetID. 1. When it is a general LED model Transmission (j)(x)( )(Set ID)( )(Data1)( )(Data2)(Cr) Data1 Data2: 00 01 ~ 03 e8 (1~1000) Acknowledgment (x)( )(Set ID)( )(OK/NG)(Data1)(Data2)(x) 2. When it is another model (read only)
  • LG WP600 | Owners Manual - Page 132
    ENGLISH 116 96. [Input Manager] (Command: s n, b1) It sets labels by input. Transmission (s)(n)( )(Set ID)( )(b)(1)( )(Data1)( )(Data2)(Cr) Data1 90: HDMI1 91: HDMI2 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D 97: HDMI3/HDMI2/DVI-D 98: OPS 99: HDMI2/OPS C0: DISPLAYPORT C1: DISPLAYPORT/USB-C
  • LG WP600 | Owners Manual - Page 133
    )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(5)(Data)(x) * Depending on the model, some picture modes may not be supported. * It works only when the HDR content is running. 107. [LED Local Dimming] (Command: s n, c6) Sets the LED Local Dimming. (A feature to set
  • LG WP600 | Owners Manual - Page 134
    1 00~64: Range control Acknowledgement (n)( )(Set ID)( )(OK/NG)(a)(b)(Data1)(Data2)(x) * This feature may not be available for all models. * Data2 only supports Hex values that are multiples of 5. * The range of minimum brightness value cannot exceed the range of maximum brightness, and the range of
  • LG WP600 | Owners Manual - Page 135
    09: PQ900 0A: PQ1000 0B: PQ2000 0C: PQ4000 0D: PQ10000 0E: HLG Acknowledgment (n)( )(Set ID)( )(OK/NG)(e)(d)(Data)(x) * It may not be supported depending on the model. 121. Phase Shift (Command: s n, ee) Sets the phase shift value. Transmission (s)(n)( )(Set ID)( )(e)(e)( )(Data)(Cr) Data 0000~0168
  • LG WP600 | Owners Manual - Page 136
    55) Sets the Smart Brightness Control. Transmission (s)(n)( )(Set ID)( )(5)(5)( )(Data)(Cr) Data 00: Manual 01: Highlight 02: Basic 03: Nearby Acknowledgment (n)( )(Set ID)( )(OK/NG)(5)(5)(Data)(x) * It may not be supported depending on the model. 126. Macro Preset (Command: s n, 8d) Sets the Macro
  • LG WP600 | Owners Manual - Page 137
    )(Cr) Data1+Data2 0000~01BC: -222~222 (4K) 0000~00DE: -111~222 (2K) Acknowledgment (n)( )(Set ID)( )(OK/NG)(8)(f)(Data1)(Data2)(x) * It may not be supported depending on the model. * The data ranges of the 4K and 2K models are different. * The minimum range value for each model corresponds to
  • LG WP600 | Owners Manual - Page 138
    122 ENGLISH TROUBLESHOOTING »»Each model may have different points to check. »»For PC(graphics card) has been installed. -- Check if the plug and play function is supported by the PC(graphics card) user manual. Issues Related to Screen (Video) •• A message saying 'No signal' or 'Invalid Format
  • LG WP600 | Owners Manual - Page 139
    correctly because the atypical aspect ratio is not supported before the graphics card driver is configured. This is not a problem of the product; it is due to mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu. •• The image is not displayed. --
  • LG WP600 | Owners Manual - Page 140
    ENGLISH 124 Issues Related to Screen (Color) •• Screen has poor color resolution (16 colors). -- Use PC settings to set the color to 24 bits (True Color) or above. •• Screen color is unstable or mono-colored. -- Check the connection status of the signal cable. Or, re-insert the PC graphics card. ••
  • LG WP600 | Owners Manual - Page 141
    ENGLISH 125 Other Issues •• The power suddenly turned off. -- Check if the auto-off function is activated on the settings related time. -- Power source has not being supplied properly. See if the product power cord is connected properly. -- Check the power control settings. -- If the internal
  • LG WP600 | Owners Manual - Page 142
    . Change your tablet PC settings. •• Multi-touch does not respond. -- The content played (e.g. Paint, etc.) may not support Multi-touch points. Make sure that you use a content that supports Multi-touch point. -- Remove the USB cable and connect it again in 10 seconds. -- Run the content (e.g. Paint
  • LG WP600 | Owners Manual - Page 143
    changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once
  • LG WP600 | Owners Manual - Page 144
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
OWNER’S MANUAL
LG Digital Signage
(Signage webOS Box)
WP600
WP600-B
Please read this manual carefully before operating your set and retain it
for future reference.
www.lg.com
Copyright © 2024 LG Electronics Inc. All Rights Reserved.