Lenovo 42962YU User Manual - Page 53
Error messages, Load Setup Defaults in the BIOS Setup Utility
View all Lenovo 42962YU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Table 2. Numeric error codes (continued) Symptom or error 2102 Initialization error on HDD1 (Ultrabay hard disk drive) 2110 Read error on HDD0 (Main hard disk drive) 2112 Read error on HDD1 (Ultrabay hard disk drive) Error messages Table 3. Error messages Symptom or error Device address conflict. Allocation error for device. Failing bits: nnnn. Invalid system configuration data. I/O device IRQ conflict. Hibernation error. Fan error. Thermal sensing error. FRU or action, in sequence 1. Reseat the hard disk drive. 2. Ultrabay hard disk drive. 3. System board. 1. Reseat the hard disk drive. 2. Main hard disk drive. 3. System board. 1. Reseat the hard disk drive. 2. Ultrabay hard disk drive. 3. System board. FRU or action, in sequence 1. Load "Setup Defaults" in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. Load "Setup Defaults" in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. 1. Load "Setup Defaults" in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. Restore the system configuration to what it was before the computer entered hibernation mode. 2. If memory size has been changed, re-create the hibernation file. 1. Fan. 2. Thermal grease. 3. System board. System board. Chapter 4. Related service information 47