Lenovo 42962YU User Manual - Page 94
Applying labels to the base cover
View all Lenovo 42962YU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Table 22. Removal steps of DC-in connector, base cover, fan, digitizer pen case, and pen switch assembly (continued) Step 11 Screw (quantity) M2 × 3.5 mm, flat-head, nylon-coated (1) Color Silver Torque 0.181 Nm (1.85 kgfcm) When installing: • Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked a as in the following figure. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component. You need to peel the thin film off from the rubber b . • Make sure that the DC-in connector, the fan connector, and the pen switch connector are attached to the system board firmly. b a a Applying labels to the base cover: The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels: 19 Homologation label 20 Product label The following labels need to be peeled off from the old base cover, and need to be put on the new base cover. 1 China telecom label 2 Windows Certificate of Authentication label (COA) 3 SIM label 4 BTY word label 5 Asset tag 6 IMEI label 7 Brazil WWAN label 8 Wireless card label (only for Brazil) 9 Modem AMOM label 10 MEDEM label (only for PRC model) 88 ThinkPad X220 Tablet and X220i Tablet Hardware Maintenance Manual