Lenovo B460 Lenovo B460 Hardware Maintenance Manual V2.0 - Page 43

DIMM, 1030 Hard disk driveHDD/Memory/Mini PCI Express Card slot

Get Lenovo B460 PDF manuals and user guides View all Lenovo B460 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Lenovo IdeaPad B460 1060 DIMM For access, remove these FRUs in order: •• "1010 Battery pack" on page 34 •• "1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot compartment cover" on page 36 Figure 6. Removal steps of DIMM Release the two latches on both edges of the socket at the same time in the direction shown by arrows 1, and then unplug the DIMM in the direction shown by arrow 2. 1 1 2 Note: If only one DIMM is used on the computer you are servicing, the card must be installed in SLOT-0 ( a : lower slot), but not in SLOT-1 ( b : upper slot). b a When installing: Insert the notched end of the DIMM into the socket. Push the DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly fixed in the slot and difficult to be moved. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
39
Lenovo IdeaPad B460
1060 DIMM
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 34
•
“1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover
” on page 36
Figure 6. Removal steps of DIMM
Release the two latches on both edges of the socket at the same time in the
direction shown by arrows
1
, and then unplug the DIMM in the direction shown
by arrow
2
.
2
1
1
Note:
If only one DIMM is used on the computer you are servicing, the card
must be installed in SLOT-0 (
a
: lower slot), but not in SLOT-1 (
b
: upper
slot).
a
b
When installing:
Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly
fixed in the slot and difficult to be moved.