Lenovo IdeaCentre Q110 Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual
Lenovo IdeaCentre Q110 Manual
View all Lenovo IdeaCentre Q110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lenovo IdeaCentre Q110 manual content summary:
- Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 1
safety...4 Electrical safety...5 Safety inspection guide 7 Handling electrostatic discharge-sensitive devices 8 Grounding requirements 8 Safety notices...9 Chapter 3. General information 12 Specifications...12 Chapter 4. General Checkout 13 Problem determination tips 14 Chapter 5. Using - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 2
Hardware Maintenance Manual Chapter 6. Symptom-to-FRU Index 19 Hard disk drive boot error 19 Power Supply Problems 20 POST error codes 20 Undetermined problems 22 Completing the installation 39 Chapter 9. Additional Service Information 40 Power management 40 Appendix. Statement 41 ii - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 3
manual 1Chapter 1. About this manual This manual contains service and reference information for Lenovo IdeaCentre Q computers listed on the cover. It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo exécuter les instructions. Lesen Sie - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 4
Manual Using eSupport For Key Commodities (Examples - hard disk drive, system board, microprocessor, LCD, and memory) •• eSupport can be used to view the list of key commodities built in a particular machine serial. •• eSupport can be accessed at the following Web site: http://consumersupport.lenovo - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 5
to be ready to support Lenovo's requirements and schedule. Products sold in 2005, will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant parts. RoHS compliant Lenovo IdeaCentre Q parts have unique FRU - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 6
Hardware Maintenance Manual Safety information 2 This chapter contains the safety information that you need to be familiar with before servicing a computer. General safety Follow these rules to ensure general safety: •• Observe good housekeeping in the area of the machines during and after - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 7
in any other conditions that might be hazardous to your eyes. •• After service, reinstall all safety shields, guards, labels, and ground wires. Replace any modems before you open the server/workstation covers, unless instructed otherwise in the installation and configuration procedures. Observe the - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 8
Hardware Maintenance Manual •• If when you work with very high voltages; these instructions are in the safety sections of maintenance information. such touching can cause personal injury and machine damage. •• Do not service the following parts with the power on when they are removed from - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 9
, had required safety items installed to protect users and service personnel from injury. This guide addresses only those items. However, good judgment should be could be and whether you can continue without first correcting the problem. Consider these conditions and the safety hazards they present: - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 10
Hardware Maintenance Manual Handling electrostatic discharge-sensitive devices Any computer part containing a grounding system, such as those listed below, to provide protection that meets the specific service requirement. Note: The use of a grounding system is desirable but not required to protect - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 11
damage. •• Disconnect the attached power cords, telecommunications systems, networks, and modems before you open the device covers, unless instructed otherwise in the installation and configuration procedures. •• Connect and disconnect cables as described in the following table when installing - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 12
Hardware Maintenance Manual CAUTION: When replacing the lithium battery, use only Part Number covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. •• Use of controls or adjustments or performance of procedures other than - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 13
Chapter 2. Safety information CAUTION: Use safe practices when lifting. CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 14
Manual General information 3 This chapter provides general information that applies to all machine types supported by this publication. Specifications This section lists the physical specifications for your computer. Type Lenovo IdeaCentre Q This section lists the physical specifications - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 15
Checkout Attention The drives in the computer you are servicing might have been rearranged or the drive startup sequence . A down-level BIOS might cause false errors and unnecessary replacement of the system board. Use the following procedure to help determine the cause of the problem: 1. Power-off - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 16
following information to assist you in problem determination. If possible, have this information available when requesting assistance from Service Support and Engineering functions. •• Machine type and model •• Processor or hard disk upgrades •• Failure symptom - Do diagnostics indicate a failure - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 17
Chapter 4. General Checkout Comparing the configuration and software set-up between "working and non-working" systems will often lead to problem resolution. 15 - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 18
Hardware Maintenance Manual Using the Setup Utility 5 The Setup Utility program is used to view and change the configuration settings of your computer, regardless of which operating system - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 19
Chapter 5. Using the Setup Utility Selecting a startup device If your computer does not start up (boot) from a device such as the CD-ROM, diskette, or hard disk as expected, use one of the following procedures to select a startup device. Selecting a temporary startup device Use this procedure to - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 20
Hardware Maintenance Manual Exiting from the Setup Utility program When you finish viewing or changing settings, press Esc to return to the Setup Utility program menu (you might - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 21
page 13. This index can also be used to help you decide which FRUs to have available when servicing a computer. If you are unable to correct the problem using this index, go to "Undetermined problems" on page 27. Notes • If you have both an error message and an incorrect audio response diagnose the - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 22
Hardware Maintenance Manual Error The boot sector on the start-up drive is corrupted. The • Verifies that the boot drive is working If the POST detects a problem, an error message appears on the screen.A single problem can cause several error messages to appear. When you correct the cause of - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 23
A reset or power cycle is required to reboot the machine. This message appears after a fatal error has been detected. Reboot and Select proper Boot The BIOS was unable to find a device or Insert Boot Media in suitable boot device. selected Boot device and press a key Make sure the boot drive - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 24
Hardware Maintenance Manual Undetermined problems If this computer has a parallel ATA hard disk , or mouse) b. Any adapters c. Memory modules d. Extended video memory e. External Cache f. External Cache RAM g. Hard disk drive h. Diskette drive 3. Power-on the computer to re-test the system. 4. Repeat - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 25
Locations 7Chapter 7. Replacing hardware This section provides illustrations to help locate the various connectors, controls and components of the computer. To remove the computer cover, "refer to Removing the computer cover" . Locating components and connectors The following illustrations will - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 26
Hardware Maintenance Manual 5 HDMI-io-bracket 6 CPU FAN 7 IPP7A-HDMI-MB 8 Rear cover assy 9 Mount bracket assy 10 Stand assy 12 main circuit board in your computer. It provides basic computer functions and supports a variety of devices that are factory-installed or that you can install later. 24 - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 27
Chapter 7. Replacing hardware The following illustration shows the locations of parts on the system board. 1 2 3 12 4 11 5 6 10 9 7 8 1 Memory slot 2 CPU socket 3 Power switch 4 USB connector (2) 5 Headphone connector 6 Microphone connector 7 HDD SATA and power socket 8 Audio line-out port - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 28
Hardware Maintenance Manual 14 13 12 11 10 1 2 3 4 5 6 7 8 9 1 CPU socket 2 CPU fan cable connector 3 Memory slot 4 Power switch 5 USB connectors(2) 6 Headphone connector 7 Microphone connector 8 HDD SATA and power - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 29
Replacing hardware 8Chapter 7. Replacing hardware Removing the computer cover Attention: Turn off the computer and wait 3 to 5 minutes to let the computer cool before removing the computer cover. To remove the computer cover: 1. Remove any media (diskettes, CDs, or memory cards) from the drives, - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 30
Hardware Maintenance Manual 5. Place the computer upside down on a flat surface. 28 - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 31
Chapter 7. Replacing hardware 6. Remove the six screws that secure the system cover to the chassis. 7. Remove the system cover. Replacing a memory module To remove the memory module: 1. Remove the computer cover. Refer to Removing the computer cover . 2. Locate the memory module sockets. Refer to - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 32
Hardware Maintenance Manual 4. Push out the latches on both sides of the memory socket to release the memory module. 5. Gently pull the memory module upward to remove it from its socket. 30 - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 33
Chapter 7. Replacing hardware 6. Align and then insert the new memory module into socket and push down on the top edge of the memory module. Make sure the latches lock the memory module in place. 7. Past back the three short pads on the new memory. 8. Install the computer cover. Refer to "Completing - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 34
Hardware Maintenance Manual 4. Pull the CPU heat sink out from the CPU. 32 - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 35
Chapter 7. Replacing hardware 5. Place the CPU heat sink upside down on a flat surface to prevent thermal grease from contaminating other components. Note Wipe off the thermal grease from both the heat sink and CPU using an alcohol pad. 6. Set the new heat sink on the CPU, aligning the four screws - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 36
Hardware Maintenance Manual 3. Remove the four screws that secure the drive carrier to the chassis. 4. Pull the drive carrier up and slide it out of the chassis. 34 - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 37
Chapter 7. Replacing hardware 5. Remove the four screws that secure the hard disk drive to the drive carrier. 6. Slide the hard disk drive out of the drive carrier. 7. Install the new hard disk drive. (1) Insert the new hard disk drive into the drive carrier. (2) Screw in the four screws on the - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 38
Hardware Maintenance Manual 7. Pull the metal bracket up and slide it out of the chassis. 8. Remove the other two screws that secure the mother board to the chassis. 36 - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 39
Chapter 7. Replacing hardware 9. Pull the motherboard out of the chassis. 10. Place the new motherboard into the chassis, aligning the screw holes in the motherboard with the mounting holes in the chassis. 11. Screw the two screws on the new motherboard back in. 12. Install all related components - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 40
Hardware Maintenance Manual Note: Your keyboard and mouse might be connected to the USB port at either the front or rear of the computer. 4. Disconnect the old keyboard - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 41
from a non-working remote control before you return it to Lenovo for a replacement. Completing the installation After replacing the parts, Refer to "Starting the Setup Utility" in the User Guide or in the Hardware Maintenance Manual. To complete a parts installation (completing the parts - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 42
Maintenance Manual Additional Service Information 9 This chapter provides additional information that the service representative the setting for Advanced Power Management (APM) BIOS mode is ignored. Not all operating systems support ACPI BIOS mode. Automatic Power-On features The Automatic - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 43
according to the instructions and requirements described in the manuals included with your computer. Lenovo will not assume responsibility for any loss incurred except those resulting from installation or operations carried out by Lenovo professional service staff. Lenovo has made every attempt - Lenovo IdeaCentre Q110 | Lenovo IdeaCentre Q100-Q110 Hardware Maintenance Manual - Page 44
table above includes the logo and registered trademarks of Lenovo and its partners. Other registered trademarks mentioned in any or all of the manuals included with your computer belong to the specific company respectively. The manual included with your computer is protected by copyright laws and
Contents
i
Contents
Chapter 1. About this manual
................................................
1
Important
Safety Information
......................................................................
1
Using eSupport
....................................................................................................
2
Important information about replacing RoHS compliant FRUs ..2
Chapter 2. Safety information
................................................
4
General safety
.......................................................................................................
4
Electrical safety
....................................................................................................
5
Safety inspection guide
...................................................................................
7
Handling electrostatic discharge-sensitive devices
.........................
8
Grounding requirements
...............................................................................
8
Safety notices
........................................................................................................
9
Chapter 3. General information
...........................................
12
Speciļ¬cations
.....................................................................................................
12
Chapter 4. General Checkout
...............................................
13
Problem determination tips
......................................................................
14
Chapter 5. Using the Setup Utility
......................................
16
Starting the Setup Utility program
.........................................................
16
Viewing and changing settings
................................................................
16
Selecting a startup device
...........................................................................
17
Exiting from the Setup Utility program
................................................
18