Lenovo Q700 Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 21
Using Device
UPC - 884942316395
View all Lenovo Q700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 5. Using the Setup Utility 3. The password dialog box will be displayed. Type the new password, and press Enter. 4. when prompted to confirm the password, type the password again. If you type the password correctly, the password will be installed. To delete a previously set Power-On Password, do the following : 1. From the Security menu, select Set Power-On Password and press Enter. 2. The password dialog box will be displayed. Press Enter in New Password and confirm New Password dialog. A setup notice will display that changes have been saved. 3. Select Exit. 4. Select Save changes and Exit. Using Device USB Setup When this feature is set to Disable, the device of USB Setup is disabled and will not be displayed in the system configuration. To set Device, do the following: 1. Start the Setup Utility program (see "Starting the Setup Utility program" on page 16). 2. From the Setup Utility program menu, select Devices. 3. Select USB Setup. 4. Select Disabled or Enabled and press Enter. 5. Return to the Setup Utility program menu and press F10 to save configuration changes and exit setup. Note If you do not want to save the settings, select Discard changes and Exit.You can set others such as ATA Drives Setup , Video Setup , Audio Setup , Network Setup , CIR Setup . See the information displayed on the right side of the screen. 19