Lenovo Q700 Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 38
Set the new heat sink on the CPU, aligning the four screws in the heat
UPC - 884942316395
View all Lenovo Q700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Hardware Maintenance Manual 3. Pull the heat sink out from the CPU. 4. Place the heat sink upside down on a flat surface to prevent thermal grease from contaminating other components. Note Wipe off the thermal grease from both the heat sink and CPU using an alcohol pad. 5. Set the new heat sink on the CPU, aligning the four screws in the heat sink with the screw sockets in the motherboard. 6. Install the computer cover. Refer to "Completing the installation". 36
Hardware Maintenance Manual
36
3.
Pull the heat sink out from the CPU.
4.
Place the heat sink upside down on a flat surface to prevent thermal
grease from contaminating other components.
Note
Wipe off the thermal grease from both the heat sink and CPU using
an alcohol pad.
5.
Set the new heat sink on the CPU, aligning the four screws in the heat
sink with the screw sockets in the motherboard.
6.
Install the computer cover. Refer to “Completing the installation”.