Lenovo ThinkCentre M58p Hardware Maintenance Manual - Page 56
Diagnostic error codes, In the following index
View all Lenovo ThinkCentre M58p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Check/Verify Check the following for proper installation. • Power Cord • On/Off Switch connector • On/Off Switch Power Supply connector • System Board Power Supply connectors • Microprocessor(s) connection Check the power cord for continuity. Check the power-on switch for continuity. FRU/Action Reseat connectors Power Cord Power-on Switch Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See "Running tests" on page 39 for the specific type for information about the Diagnostic programs. In the following index, X can represent any number. Diagnostic Error Code 000-000-XXX BIOS Test Passed 000-002-XXX BIOS Timeout 000-024-XXX BIOS Addressing test failure 000-025-XXX BIOS Checksum Value error 000-026-XXX FLASH data error 000-027-XXX BIOS Configuration/Setup error 000-034-XXX BIOS Buffer Allocation failure 000-035-XXX BIOS Reset Condition detected 000-036-XXX BIOS Register error FRU/Action No action 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board 1. Run Setup 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 3. System board 1. Reboot the system 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 3. Run memory test 4. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board 48 ThinkCentre Hardware Maintenance Manual