Lenovo ThinkPad 770Z Quick Reference and Service Information for TP 770E/ED
Lenovo ThinkPad 770Z Manual
View all Lenovo ThinkPad 770Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Lenovo ThinkPad 770Z manual content summary:
- Lenovo ThinkPad 770Z | Quick Reference and Service Information for TP 770E/ED - Page 1
Parts Number: 05L2163 ThinkPad 770E/770ED Quick Reference and Service Information Location LCD indicator panel TrackPoint Your Name: Company Name: Model Number: Serial Number: Company or Reseller Service: IBM Service Web Site: IBM Service Number: The IBM Service Number for your country can be - Lenovo ThinkPad 770Z | Quick Reference and Service Information for TP 770E/ED - Page 2
drivers See the... ThinkPad 770E/770ED User's Guide Supplement ThinkPad 770E/770ED User's Guide Supplement Online book Attention Print the software installation section of the Online book before you format the hard disk drive. Know about hot or warm plug and unplug functions ThinkPad 770 User
Parts Number: 05L2163
Your Name:
Company Name:
Model Number:
Serial Number:
Company or Reseller Service:
IBM Service Web Site:
IBM Service Number:
Location
Telephone
jack
PC card slots
UltraBay II
Bay eject levers
LED
Click buttons
TrackPoint
LCD indicator
panel
Replacing the UltraBay II
Device
Function Keys
You want to...
You need to...
ThinkPad 770E/770ED
Quick Reference and Service Information
swap the device in
the UltraBay II
release the bay eject levers; then a
message appears.
Make sure the
LED stays on green and there is no
beep; then swap the device.
attach the diskette
drive externally
power off your computer; then
attach the external diskette drive.
Note:
Some devices or configuration might not support Hot
plug.
If the LED is blinking orange, you cannot operate.
Fn
+
Result
F2
Displays the battery power status indicator or
erases it when it is being displayed.
(The Fuel
program must first be activated.)
F3
Places the computer in standby mode.
F4
Places the computer in suspend mode.
The IBM Service Number for your country can be found in the
International Hardware Service Information
booklet shipped with
your computer.
F7
Changes computer display output locations.
F8
Changes computer LCD modes.
F11
Changes the power modes during battery-power
operation
Notes:
F12
Places the computer in hibernation mode.
Copyright IBM Corp.1998