Lenovo ThinkPad L520 (English) User Guide - Page 161
BIOS Setup Utility items, means that the function is not configured.
View all Lenovo ThinkPad L520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
BIOS Setup Utility items The following tables show the contents of the Config menu items, the Security menu items, and the Startup menu items of the BIOS Setup Utility. Note: Some items are displayed on the menu only if the computer supports the corresponding features. Notes: • Enabled means that the function is configured. • Disabled means that the function is not configured. • Default values are in boldface. Config menu items Table 4. Config menu items Function Network Wake On LAN Selection • Enabled • Disabled Ethernet LAN Option ROM Wireless LAN and WiMAX Radios USB USB BIOS Support Always On USB Always On USB Charge in Off Mode • Enabled • Disabled • On • Off • Enabled • Disabled • Enabled • Disabled • Enabled • Disabled Comments Enables the system to Power on when the Ethernet controller receives a magic packet. Note: Wake On LAN function does not work when a hard disk password is set. Loads the Ethernet LAN Option ROM to enable startup from an integrated network device. If you select "On," the internal wireless radio is turned on. If you select "Off," the internal wireless radio is turned off. Enable or disable boot support for USB floppy disk drive and USB CD-ROM. If you select "Enabled," the external USB devices can be charged via USB ports even when the system is in low power mode (standby, hibernation, or power-off). If you select "Enabled," the Always On USB connector enables you to charge some devices, such as iPod, iPhone and BlackBerry smartphones. Keyboard/Mouse Fn Key Lock • Enabled • Disabled Note: If you want to charge these devices when your computer is in hibernation mode or powered off, you will need to open the Power Manager program and configure corresponding settings to enable the Always On USB connector function. For details about how to enable the Always On USB connector function, refer to the online help of the Power Manager program. When enabled, you can press the Fn key to keep it in a pressed condition, then press the desired function key. The action is equivalent to pressing the required key and the Fn key simultaneously. When you pressed the Fn key twice, the state is locked until you press the Fn key again. Chapter 8. Advanced configuration 143