Lenovo ThinkPad L530 Hardware Maintenance Manual - Page 48

Numeric error codes, Error messages, If no numeric code is displayed

Get Lenovo ThinkPad L530 PDF manuals and user guides View all Lenovo ThinkPad L530 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

If no numeric code is displayed, check the narrative descriptions of symptoms. If the symptom is not described there, go to "Intermittent problems" on page 44. Note: For a device not supported by diagnostic codes in the ThinkPad notebook computers, see the manual for that device. Numeric error codes Table 1. Numeric error codes Symptom or error (beeps, if any) FRU or action, in sequence 0187 System board. EAIA data access error-The access to EEPROM is failed. 0189 Invalid RFID configuration information area-The EEPROM checksum is not correct. System board. 0190 Critical low-battery error 1. Charge the battery pack. 2. Battery pack. 0191 System Security-Invalid Remote Change requested. 0251 System CMOS checksum bad- Default configuration used. 0271 Real Time Clock error-check Date and Time settings. 1. Run ThinkPad Setup, and then save current setting by pressing F10. 2. System board. 1. Charge the backup battery for more than 8 hours by connecting the ac power adapter. 2. Replace the backup battery and run ThinkPad Setup to reset the time and date. Run ThinkPad Setup to reset the time and date. 1802 Unauthorized network card is plugged in-Turn off and remove the Mini PCI network card. 1. Remove Mini PCI network card. 2. System board. 2110 Read error on HDD0 (Main HDD) 2112 Read error on HDD2 (Mini SATA) Main HDD Mini SATA Error messages Table 2. Error messages Symptom or error (beeps, if any) Bad CRC of Security Settings in EFI. Enter ThinkPad Setup. Fan error. FRU or action, in sequence 1. Press F1 to enter ThinkPad Setup. Press F9, and Enter to load the default setting. Then save the current setting by pressing F10, and restart the computer. 2. System board. 1. Thermal fan. 2. Thermal grease. 3. System board. 42 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
If no numeric code is displayed, check the narrative descriptions of symptoms. If the symptom is not
described there, go to “Intermittent problems” on page 44.
Note:
For a device not supported by diagnostic codes in the ThinkPad notebook computers, see the
manual for that device.
Numeric error codes
Table 1. Numeric error codes
Symptom or error (beeps, if any)
FRU or action, in sequence
0187
EAIA data access error—The access to EEPROM is failed.
System board.
0189
Invalid RFID configuration information area—The
EEPROM checksum is not correct.
System board.
0190
Critical low-battery error
1.
Charge the battery pack.
2. Battery pack.
0191
System Security—Invalid Remote Change requested.
1.
Run ThinkPad Setup, and then save current
setting by pressing F10.
2. System board.
0251
System CMOS checksum bad— Default configuration
used.
1.
Charge the backup battery for more than 8 hours
by connecting the ac power adapter.
2. Replace the backup battery and run ThinkPad Setup
to reset the time and date.
0271
Real Time Clock error—check Date and Time settings.
Run ThinkPad Setup to reset the time and date.
1802
Unauthorized network card is plugged in—Turn off and
remove the Mini PCI network card.
1.
Remove Mini PCI network card.
2. System board.
2110
Read error on HDD0 (Main HDD)
Main HDD
2112
Read error on HDD2 (Mini SATA)
Mini SATA
Error messages
Table 2. Error messages
Symptom or error (beeps, if any)
FRU or action, in sequence
Bad CRC of Security Settings in EFI. Enter ThinkPad
Setup.
1.
Press F1 to enter ThinkPad Setup. Press F9, and
Enter to load the default setting. Then save the
current setting by pressing F10, and restart the
computer.
2. System board.
Fan error.
1.
Thermal fan
.
2. Thermal grease.
3. System board.
42
Hardware Maintenance Manual