Lenovo ThinkPad T430 (English) User Guide - Page 136
Menu item, Value, Comments, Enabled, Disabled, hours, Beep and Alarm, Serial ATA SATA
View all Lenovo ThinkPad T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Table 5. Config menu items (continued) Menu item Submenu item Value Beep and Alarm Intel (R) Rapid Start Technology Password Beep • Disabled • Enabled Enter after: • Immediately • 1 minute • 2 minutes • 5 minutes • 10 minutes • 15 minutes • 30 minutes • 1 hour • 2 hours • 3 hours • Disabled • Enabled Serial ATA (SATA) CPU Keyboard Beep SATA Controller Mode Option Core Multi-Processing • Enabled • Disabled • Compatibility • AHCI • Disabled • Enabled 118 User Guide Intel Hyper-Threading Technology • Disabled • Enabled Comments If you select Enabled, the system is powered on when the ac power adapter is attached. When the system is in hibernate state, the system resumes. If you select Disabled, the system is not powered on nor resumed when the ac power adapter is attached. To use this feature, a special partition on the solid state drive is required. When enabled, you can enable the 30 Day Standby function through the Power Manager program. The function enables the computer to enter a lower power state after the specified time in sleep state. And it takes only seconds to resume normal operation. Enable this option to have a beep sound when the system is waiting for a power-on, hard disk, or supervisor password. Different beeps will sound when the entered password matches or does not match the configured password. Enable or disable keyboard beep when unmanageable key combinations are pressed. Select SATA controller operation mode. Enable or disable additional execution core units within a CPU. Note: If you are using a computer with a single-core processor, this item is not available. Enable or disable additional logical processors within a processor core.