Lenovo ThinkServer RD330 MegaRAID SAS Software User Guide - Page 181

MegaRAID SAS Software User Guide Chapter 5: MegaRAID Command Tool | SafeStore Security Options 5.7.6 Change the Security Key 5.7.7 Get the Security Key ID 5.7.8 Set the Security Key ID Use the command in the following table to change they security key to a new security key. Table 33: Change the Security Key Convention Description MegaCli -ChangeSecurityKey -OldSecurityKey sssssssssss | -SecurityKey sssssssssss| [-Passphrase sssssssssss] | [-KeyID kkkkkkkkkkk] -aN Changes a security key to a new security key. -ChangeSecurityKey: Changes the security key. -OldSecurityKey sssssssssss: Enters the old security key. The security key is case-sensitive. It must be between eight and thirty-two characters and contain at least one number, one lowercase letter, one uppercase letter, and one non-alphanumeric character (e.g. < > @ +). The space character is not permitted. -SecurityKey sssssssssss: Enters the new security key. The security key is case-sensitive. It must be between eight and thirty-two characters and contain at least one number, one lowercase letter, one uppercase letter, and one non-alphanumeric character (e.g. < > @ +). The space character is not permitted. [-Passphrase sssssssssss]: Enters the new passphrase. The pass phrase is case-sensitive. It must be between eight and thirty-two characters and contain at least one number, one lowercase letter, one uppercase letter, and one non-alphanumeric character (e.g. < > @ +). The space character is not permitted. [-KeyID kkkkkkkkkkk]: Enters the security key ID. The key ID displays when you have to enter a security key. If you have multiple security keys, the security key ID helps you determine which security key to enter. Use the command in the following table to display the security key ID. Table 34: Get the Security Key ID Convention Description MegaCli -GetKeyID [-PhysDrv[E0:S0]] -aN -GetKeyID: Displays the security key ID. Use the command in the following table to set the security key ID. Table 35: Set the Security Key ID Convention Description MegaCli -SetKeyID -KeyID kkkkkkkkkkk -aN -SetKeyID: Set the security key ID. -KeyID kkkkkkkkkkk: Enters the security key ID. The key ID displays when you have to enter a security key. If you have multiple security keys, the security key ID helps you determine which security key to enter. Page 181