Lenovo ThinkServer RD330 MegaRAID SAS Software User Guide - Page 387

MegaRAID SAS Software User Guide Appendix B: MegaCLI Error Messages | Error Messages and Descriptions Appendix B MegaCLI Error Messages This appendix lists the MegaCLI error messages. The MegaCLI Configuration Utility is a command line interface application you can use to manage MegaRAID SAS RAID controllers. See Chapter 5 for more information about the MegaCLI utility and commands. B.1 Error Messages and Descriptions Each message that appears in the event log has an error level that indicates the severity of the event, as shown in Table 136. Table 136: Error Messages and Descriptions Number 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f 0x10 0x11 0x12 0x13 0x14 0x15 0x16 Event Text Command completed successfully Invalid command DCMD opcode is invalid Input parameters are invalid Invalid sequence number Abort isn't possible for the requested command Application 'host' code not found Application already in use - try later Application not initialized Given array index is invalid Unable to add missing drive to array, as row has no empty slots Some of the CFG resources conflict with each other or the current config Invalid device ID / select-timeout Drive is too small for requested operation Flash memory allocation failed Flash download already in progress Flash operation failed Flash image was bad Downloaded flash image is incomplete Flash OPEN was not done Flash sequence is not active Flush command failed Specified application doesn't have host-resident code Page 387