LevelOne KVM-9006 Manual

LevelOne KVM-9006 Manual

Get LevelOne KVM-9006 PDF manuals and user guides View all LevelOne KVM-9006 manuals
Add to My Manuals
Save this manual to your list of manuals

LevelOne KVM-9006 manual content summary:

  • LevelOne KVM-9006 | Manual - Page 1
    User Manual KVM CAT5 USB Extender Kit KVM-9006 KVM-9006 (Transmitter) & KVM-9006 (Receiver) V1.0
  • LevelOne KVM-9006 | Manual - Page 2
    , BUTTON AND PORTS 5 3 HARDWARE INSTALLATION 8 3.1 INSTALLATION DIAGRAM 8 3.2 3-IN-1 VGA CABLE INSTALLATION 9 4 OPERATIONS 10 4.1 KEYBOARD HOTKEY COMMANDS 10 5 TROUBLESHOOTING 11 APPENDIX A. SPECIFICATIONS 13 APPENDIX B. CAT5 CABLE CONNECTOR PIN DEFINITION 14 APPENDIX C. CERTIFICATES 15
  • LevelOne KVM-9006 | Manual - Page 3
    1 Introduction The CAT5 USB KVM Extender enables user to access the computer, server or KVM switch up to 150 meters away with superior auto-adjust RGB gain/delay control capability. The CAT5 USB Extender is a pair of Transmitter KVM-9006T and Receiver KVM-9006R for high-density applications where
  • LevelOne KVM-9006 | Manual - Page 4
    or data transmission  Work with PS/2 or USB computer  Easy to install and use with plug-and-play functionality 1.3 Package Contents  1 x KVM-9006T  1 x KVM-9006R  2 x KVM 3-in-1 Cable  2 x USB Changer  1 x User Manual  1 x DC12V/1A AC to DC Power Adapter for KVM-9006T  1 x DC12V/1A AC to DC
  • LevelOne KVM-9006 | Manual - Page 5
    9006T is power on or connected to a computer which is power on. KVM-9006T's RJ-45 port is not connected to the remote site KVM-9006R. KVM-9006T is occupied by the remote site KVM-9006R. KVM-9006R is auto-adjusting the VGA signal. KVM-9006T is linking with remote when plugging / re-plugging in a CAT5
  • LevelOne KVM-9006 | Manual - Page 6
    Port: for connecting to USB type keyboard and mouse RJ-45 Port: for connecting to a CAT5 cable Local Host Port: for connecting to the local host via 3-in-1 VGA cable
  • LevelOne KVM-9006 | Manual - Page 7
    Remote port is power on. The Remote port is selected, but no computer is connected to the Remote port or the computer is power off. KVM-9006R is auto-adjusting the VGA signal. 5
  • LevelOne KVM-9006 | Manual - Page 8
    Local/Remote Button Power Jack RJ-45 Port Console Port Local Host Port Local/Remote Button: for selecting local or remote computer USB Console Port: for connecting to USB type keyboard and mouse RJ-45 Port: for connecting to a CAT5 cable Local Host Port: for connecting to the local host via
  • LevelOne KVM-9006 | Manual - Page 9
    Cable Diagrams 3-in-1 VGA Cable HDDB15 male to one HDDB15 male plus two mini din 6-pin PS/2 connectors.  PS/2 Keyboard to USB Changer PS/2 (keyboard) to USB (keyboard and mouse) changer.  CAT5/5E/6 Straight Through UTP/STP Cable CAT5/5E/6 Straight Through Cable Connector (8P8C)  7
  • LevelOne KVM-9006 | Manual - Page 10
    plug the other end of CAT5 cable into RJ-45 port of KVM-9006R. 4. Connect keyboard, mouse and monitor to the KVM-9006T /KVM-9006R console ports (USB Keyboard/Mouse ports and VGA port). 5. Connect local computer to KVM-9006T / KVM-9006R with the accompanied 3-in-1 VGA cable (see section "3-in-1 VGA
  • LevelOne KVM-9006 | Manual - Page 11
    HDDB15 male connector at one end. Plug it into the Local Host port of the KVM-9006R. The other end of input cable has three connectors: a HDDB15 male type  USB Computer: Connect the PS/2-USB changer to PS/2 keyboard connector and then plug the changer into an available USB port. This single USB port
  • LevelOne KVM-9006 | Manual - Page 12
    sequences made by the remote console side. To send commands to the KVM-9006R, you must press the hotkey (default is Scroll Lock) twice within Switch between Local and Remote Site The table below lists all the supported hotkey commands. Command Function C To switch between Local and Remote ports
  • LevelOne KVM-9006 | Manual - Page 13
    5 Troubleshooting Make sure that all cables are well seated. Label all cables with the name/number for each respective computer to avoid confusion. Q: KVM-9006 (Transmitter) or KVM-9006R's LED is not ON.  Make sure the computer connected to KVM-9006T or KVM-9006R is power on.  Make sure the cable
  • LevelOne KVM-9006 | Manual - Page 14
    , if the problem remained, please shorten the CAT5 cable length or reduce VGA resolution. Q: There is an error message "Keyboard or Mouse not found" on the screen.  Please make sure USB or PS/2 connectors are well seated. Q: How to use the KVM CAT5 Extender with an USB interface computer such
  • LevelOne KVM-9006 | Manual - Page 15
    in-1 VGA cables to local computer) 1 RJ-45 port for connecting to KVM-9006R 2 (Power and Status) USB USB 1920 x 1440 Metal DC 12V, 1A 0 ~ 50 °C -20 ~ 60 °C 0~80%, Non-Condensing 157.5 x 71.6 x 29 mm Weight (g) 370g KVM-9006 (Receiver) Connector VGA Connector RJ-45 Port (CAT5) LEDs Port Selection
  • LevelOne KVM-9006 | Manual - Page 16
    Appendix B. CAT5 Cable Connector Pin Definition Pin Wire Color Pair 1 White/Orange 2 2 Orange 2 3 White/Green 3 4 Blue 1 5 White/Blue 1 6 Green 3 7 White/Brown 4 8 Brown 4 Function T R T R T R T R 14
  • LevelOne KVM-9006 | Manual - Page 17
    Appendix C. CERTIFICATES FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
User Manual
KVM CAT5 USB Extender Kit
KVM-9006
KVM-9006 (Transmitter)
&
KVM-9006 (Receiver)
V1.0