LevelOne WGR-6012 Manual

LevelOne WGR-6012 Manual

Get LevelOne WGR-6012 PDF manuals and user guides View all LevelOne WGR-6012 manuals
Add to My Manuals
Save this manual to your list of manuals

LevelOne WGR-6012 manual content summary:

  • LevelOne WGR-6012 | Manual - Page 1
    LevelOne WGR-6012 300Mbps N_Max Wireless Gigabit Router User Manual V1.0 1
  • LevelOne WGR-6012 | Manual - Page 2
    be changed without prior notice. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital if not installed and used in accordance with the instructions in this manual, may cause harmful interference to radio communications. Operation of
  • LevelOne WGR-6012 | Manual - Page 3
    mode Setup 11 2.4 Quick Wizard Install mode Setup 12 2.5 Wireless Setting 12 2.6 Auto Detect WAN Service 13 2.7. Manual select WAN Service 13 2.8 Summary of the settings and Next to "Reboot 13 2.9 Apply the Settings or Modify 14 2.10 Test the Internet connection 14 2.11 Setup Completed 15
  • LevelOne WGR-6012 | Manual - Page 4
    carefully for fully exploiting the functions of this product. 1.1 Packing List  WGR-6012 x1  RJ-45 Ethernet LAN Cable x1  Antenna x 2  Power Adapter x1  Quick Installation Guide x1  CD Manual x1 1.2 Spec Summary Table Device Interface Ethernet WAN RJ-45 port, 10/100/1000Mbps, auto-MDI
  • LevelOne WGR-6012 | Manual - Page 5
    , PPTP, L2TP ● WAN Connection Auto-reconnect, dial-on-demand, manually ● One-to-Many NAT Virtual server, special application, DMZ, Super DMZ ● (IP Passthrough) NAT Session Support NAT session 20000 SPI Firewall IP/Service filter, URL blocking, MAC control ● DoS Protection DoS (Deny of
  • LevelOne WGR-6012 | Manual - Page 6
    Status WAN LED LAN LED Wi-Fi LED LED status Green in flash Green Green in flash Green Green in flash Green Green in flash Green in fast flash Green in dark Description Device status is working. RJ-45 cable is plugged Data access RJ-45 cable is plugged Data access WLAN is on Data access Device is
  • LevelOne WGR-6012 | Manual - Page 7
    Step 1. Attach the antenna. 1.1. Remove the antenna from its plastic wrapper. 1.2. Screw the antenna in a clockwise direction to the back panel of the unit. 1.3. Once secured, position the antenna upward at its connecting joint. This will ensure optimal reception. 1.Turn off the Power Switch first.
  • LevelOne WGR-6012 | Manual - Page 8
    Step 2 Insert the Ethernet cable into LAN Port: Insert the Ethernet patch cable into LAN port on the back panel of Router, and an available Ethernet port on the network adapter in the computer you will use to configure the unit. Step 3 Insert the Ethernet patch cable
  • LevelOne WGR-6012 | Manual - Page 9
    Step 4. Power on Router: 4.1. Connect the power adapter to the receptor on the back panel of your Router and Push Power switch Step 5. Complete the setup. 5.1. When complete, the Status LED will flash. 9
  • LevelOne WGR-6012 | Manual - Page 10
    reader on your PC. The program, AutoRun, will be executed automatically. And then you can click the Easy setup Icon for this utility. Configure the settings by the following steps. 2.1 Select Language then click "Next" for continues. 10
  • LevelOne WGR-6012 | Manual - Page 11
    2.2 Setup mode You can select Wizard mode to run the setup step-by-step or run advanced mode to diagnose the network settings of the router. 2.3 Advanced mode Setup. Check the PC, Router or Internet icons for the Status of PC, Router or Internet. 11
  • LevelOne WGR-6012 | Manual - Page 12
    2.4 Quick Wizard Install mode Setup 1. Make sure the router is powered on. 2. Make sure your network adapter is connected to the LAN port of the router 3. Make sure your network adapter has an IP address. Click "Next" for continues 2.5 Wireless Setting. Key in the SSID, Channel and Security options,
  • LevelOne WGR-6012 | Manual - Page 13
    ", to disable this function. Note: The Item supports to detect the Dynamic and PPPoE WAN Services only Example, the Dynamic WAN type is tected. 2.7. Manual select WAN Service In the manual mode, Click the any icons for continues. 2.8 Summary of the settings and Next to "Reboot" Click "Next" for
  • LevelOne WGR-6012 | Manual - Page 14
    2.9 Apply the Settings or Modify. Click "Next" for continue. 2.10 Test the Internet connection. Test WAN Networking service. Click "Next" for continue. You can ignore the by select the "Ignore Test". 14
  • LevelOne WGR-6012 | Manual - Page 15
    2.11 Setup Completed. The EzSetup is finish, you can open the default web browser to configure advanced settings of the Router. Click "Finish" to complete the installation. 15
  • LevelOne WGR-6012 | Manual - Page 16
    CChhaapptteerr 33 MMaakkiinngg CCoonnffiigguurraattiioonn This product provides Web based configuration scheme, that is, configuring by your Web browser, such as Mozilla Firefox or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms. 16
  • LevelOne WGR-6012 | Manual - Page 17
    3.1 Login to Configure from Wizard Type in the IP Address ( http://192.168.1.1 ) HHU UHH Type password, the default is "admin" and click „login‟ button. Press "Wizard" for basic settings with simple way. Press "Next" to start wizard. 17
  • LevelOne WGR-6012 | Manual - Page 18
    Step 1: Set up your system password. Step 2: Select Wan Type. Auto Detecting or Setup Manually. 18
  • LevelOne WGR-6012 | Manual - Page 19
    Step 3: Setup the LAN IP and WAN Type. Example: Step 4: Please fill in PPPoE service information which is provided by your ISP. Step 5: Set up your Wireless. 19
  • LevelOne WGR-6012 | Manual - Page 20
    Set up your Authentication and Encryption. Step 6: Then click Apply Setting. And then the device will reboot. Step 7: Click Finish to complete it. 20
  • LevelOne WGR-6012 | Manual - Page 21
    assigned a dynamic IP, there may appear a "Renew" or "Release" button on the Side note column. You can click this button to renew or release IP manually. Statistics of WAN: enables you to monitor inbound and outbound packets 3.3 Advanced 3.3.1 Basic Setting Please Select "Advanced Setup" to Setup 21
  • LevelOne WGR-6012 | Manual - Page 22
    22
  • LevelOne WGR-6012 | Manual - Page 23
    This option is primary to enable this product to work properly. The setting items and the web appearance depend on the WAN type. Choose correct on your network must use the LAN IP address of your product as their Default Gateway. You can change it if necessary. 2. WAN Type: WAN connection type
  • LevelOne WGR-6012 | Manual - Page 24
    L2TP: Some ISPs require the use of L2TP to connect to their services Static IP Address: ISP assigns you a static IP address: WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting provided by your ISP. Dynamic IP Address: Obtain an IP address from ISP automatically
  • LevelOne WGR-6012 | Manual - Page 25
    appears blank. If you don't want to change the password, leave it empty. PPPoE Service Name: optional. Input the service name if your ISP requires it. Otherwise, leave it with ISP until the connection is established. Manually :The device will not make the link until someone clicks the connect-button in the
  • LevelOne WGR-6012 | Manual - Page 26
    connect to their services First, please password, keep it empty. 3. Connection ID: optional. Input the connection ID if your ISP requires it. 4. Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set is established. Manually: The device will not make the link until someone
  • LevelOne WGR-6012 | Manual - Page 27
    connect to their services First, please password, keep it empty. 3. Connection ID: optional. Input the connection ID if your ISP requires it. 4. Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set is established. Manually: The device will not make the link until someone
  • LevelOne WGR-6012 | Manual - Page 28
    Virtual Computers (Only for Static and dynamic IP address WAN type) Virtual Computer enables you to use the original NAT feature, and allows you to setup the one-to-one mapping of multiple global IP address and local IP address.  Global IP: Enter the global IP address assigned by your ISP.  Local
  • LevelOne WGR-6012 | Manual - Page 29
    3.3.1.2 DHCP Server Press "More>>" 1. DHCP Server: Choose "Disable" or "Enable." 2. Lease time: This is the length of time that the client may use the IP address it has been Assigned by DHCP server. 3. IP pool starting Address/ IP pool starting Address: Whenever there is a request, the DHCP
  • LevelOne WGR-6012 | Manual - Page 30
    this product and other Access Points that have the same Network ID. (The factory setting is "default") SSID Broadcast: The router will Broadcast beacons that have some information, including ssid so that The wireless clients can know how many AP devices by scanning function in the network. Therefore
  • LevelOne WGR-6012 | Manual - Page 31
    Distribution System) WDS operation as defined by the IEEE802.11 standard has been made available. Using WDS it is possible to wirelessly connect Access Points, and in doing so extend a wired infrastructure to locations where cabling is not possible or inefficient to implement. Hybrid Mode It
  • LevelOne WGR-6012 | Manual - Page 32
    Check Box was used to switch the function of the 802.1X. When the 802.1X function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server IP address or the 802.1X server‟s domain-name. RADIUS Shared Key Key value shared by the RADIUS
  • LevelOne WGR-6012 | Manual - Page 33
    . 2. Fill in the key, Ex 12345678 WPA Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user 33
  • LevelOne WGR-6012 | Manual - Page 34
    WPA2(AES) Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server IP address or the 802.1X server‟s domain-name. Select RADIUS Shared Key If you select HEX, you
  • LevelOne WGR-6012 | Manual - Page 35
    Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server The router will detect automatically which Security type(WPA-PSK version 1 or 2) the client uses to encrypt. IP address
  • LevelOne WGR-6012 | Manual - Page 36
    3.3.1.4 Change Password 24B 20B You can change Password here. We strongly recommend you to change the system password for security reason. 3.3.2 Forwarding Rules 36
  • LevelOne WGR-6012 | Manual - Page 37
    by enabling the Virtual Server Mapping. A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified function, these applications cannot work with a pure NAT router. The Special Applications feature allows some of these applications
  • LevelOne WGR-6012 | Manual - Page 38
    packets sent to the specified port numbers are allowed to pass through the firewall. This product provides some predefined settings Select your application and click Copy to to add the predefined setting to your list. Note! At any given time, only one PC can use each Special Application tunnel
  • LevelOne WGR-6012 | Manual - Page 39
    is a video game console produced by Microsoft Corporation. Please enable this function when you play games. UPnP Setting The device also supports this function. If the OS supports this function enable it, like Windows XP. When the user get IP from Device and will see icon as below: 3.3.3 Security
  • LevelOne WGR-6012 | Manual - Page 40
    3.3.3.1 Packet Filters Packet Filter enables you to control what packets are allowed to pass the router. Outbound filter applies on all outbound packets. However, inbound filter applies on packets that destined to Virtual Servers or DMZ host only. You can select
  • LevelOne WGR-6012 | Manual - Page 41
    and UDP are defined. An empty implies all port addresses. Packet Filter can work with Scheduling Rules, and give user more flexibility on Access control. For Detail, please refer to Scheduling Rule. Each rule can be enabled or disabled individually. Inbound Filter: To enable Inbound Packet Filter
  • LevelOne WGR-6012 | Manual - Page 42
    (1.2.3.100-1.2.3.119) Remote hosts can do everything except read net news (port 119) and transfer files via FTP (port 21) behind Router Server. Others are all allowed. After Inbound Packet Filter setting is configured, click the save button. Outbound Filter: 42
  • LevelOne WGR-6012 | Manual - Page 43
    To enable Outbound Packet Filter click the check box next to Enable in the Outbound Packet Filter field. Example 1: Router LAN IP is 192.168.1.1 (192.168.1.100-192.168.1.149) Located hosts are only allowed to send mail (port 25), receive mail (port 110),
  • LevelOne WGR-6012 | Manual - Page 44
    Example 2: Router LAN IP is 192.168.1.1 (192.168.1.100 and 192.168.1.119) Located Hosts can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are allowed After Outbound Packet Filter setting is configured, click the save button. 44
  • LevelOne WGR-6012 | Manual - Page 45
    enable Domain Filter. Log DNS Query Check if you want to log the action when someone accesses the specific URLs. Privilege IP Addresses Range Setting a group of hosts and privilege these hosts to access network without restriction. Domain Suffix A suffix of URL to be restricted. For example, ".com
  • LevelOne WGR-6012 | Manual - Page 46
    Example: In this example: 1. URL include "www.msn.com" will be blocked, and the action will be record in log-file. 2. URL include "www.sina.com" will not be blocked, but the action will be record in log-file. 3. URL include "www.baidu.com" will be blocked, but the action will not be record in log-
  • LevelOne WGR-6012 | Manual - Page 47
    3.3.3.3 URL Blocking URL Blocking will block LAN computers to connect to pre-defined Websites. The major difference between "Domain filter" and "URL Blocking" is Domain filter require user to input suffix (like .com or .org, etc), while URL Blocking require user to input a keyword only. In other
  • LevelOne WGR-6012 | Manual - Page 48
    In this example: 1. URL include "msn" will be blocked, and the action will be record in log-file. 2. URL include "sina" will be blocked, but the action will be record in log-file 48
  • LevelOne WGR-6012 | Manual - Page 49
    Check "Enable" to enable the "MAC Address Control". All of the settings in this page will take effect only when "Enable" is checked. Connection control Check "Connection control" to enable the controlling of which wired and wireless clients can connect to this device. If a client is denied to connect
  • LevelOne WGR-6012 | Manual - Page 50
    corresponding client to connect to this device. A When "Association control" is checked, check "A" will allow the corresponding client to associate to the wireless LAN. In this page, we provide the following Combobox and button to help you to input the MAC address. You can select a specific
  • LevelOne WGR-6012 | Manual - Page 51
    "denied" to associate to the wireless LAN. 4.Clients 1 and 3 have fixed IP addresses either from the DHCP server of this device or manually assigned: ID 1 - "00-12 Address pool specified in the "DHCP Server" page or can use a manually assigned static IP address. If, for example, client 3 tries to
  • LevelOne WGR-6012 | Manual - Page 52
    not affected by Association control. 3.3.3.5 Miscellaneous Items Remote Administrator Host/Port In general, only Intranet user can browse the built-in web pages to perform administration task. This feature enables you to perform administration task from remote host. If this feature is enabled, only
  • LevelOne WGR-6012 | Manual - Page 53
    Time-out The time of no activity to logout automatically. Set it to zero to disable this feature. Discard PING from WAN Detection When this feature is enabled, the router will detect and log the DoS attack comes from the Internet. Currently, the router can detect the following DoS attack: SYN
  • LevelOne WGR-6012 | Manual - Page 54
    UTC time Time Zone Select a time zone where this device locates. Set Date and Time manually Selected if you want to Set Date and Time manually. Set Date and Time manually Selected if you want to Set Date and Time manually. Function of Buttons Sync Now: Synchronize system time with network time
  • LevelOne WGR-6012 | Manual - Page 55
    3.3.4.2 System Log This page support two methods to export system logs to specific destination by means the SMTP server IP and port, which are concerted with ':'. If you do not specify port number, the default value is 25. For example, "mail.your_url.com" or "192.168.1.100:26". Send E-mail alert to
  • LevelOne WGR-6012 | Manual - Page 56
    host to your current IP address, which changes each time you connect your Internet service provider. Before you enable Dynamic DNS, you need to register an account on one : Provider Host Name Username/E-mail Password/Key You will get this information when you register an account on a Dynamic DNS
  • LevelOne WGR-6012 | Manual - Page 57
    Community Setting the community of SetRequest your device will accept. IP 1, IP 2, IP 3, IP 4 Input your SNMP Management PC‟s IP here. User has to configure to where this device should send SNMP Trap message. SNMP Version Please select proper SNMP Version that your SNMP Management software supports
  • LevelOne WGR-6012 | Manual - Page 58
    address to use for outgoing IP data grams. If you have more than one routers and subnets, you will need to enable routing table to allow packets to find allow different subnets to communicate with each other. Routing Table settings are settings used to setup the functions of static. Dynamic Routing
  • LevelOne WGR-6012 | Manual - Page 59
    3.3.4.6 Schedule Rule You can set the schedule time to decide which service will be turned on or off. Select the "enable" item. Press "Add New Rule" You can write a rule name and set which day and what time to schedule from "Start Time" to "End Time". The following example configure "ftp time" as
  • LevelOne WGR-6012 | Manual - Page 60
    Delete To delete the schedule rule, and the rule# of the rules behind the deleted one will decrease one automatically. Schedule Rule can be apply to Virtual server and Packet Filter, for example: Exanple1: Virtual Server - Apply Rule#1 (ftp time: everyday 14:20 to 16:30) Exanple2: Packet Filter -
  • LevelOne WGR-6012 | Manual - Page 61
    3.3.5 Toolbox 3.3.5.1 View Log You can View system log by clicking the View Log button 61
  • LevelOne WGR-6012 | Manual - Page 62
    by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin file you saved. 3.3.5.4 Reset to default You can also reset this product to factory default by clicking the Reset to default button. 62
  • LevelOne WGR-6012 | Manual - Page 63
    of this device, say 00-11-22-33-44-55. Clicking "Wake up" button will make the router to send the wake-up frame to the target device immediately. Domain Name or IP Address for Test Allow you to configure an IP, and ping the device. You can ping a specific IP to
  • LevelOne WGR-6012 | Manual - Page 64
    802.1x Setting AAppppeennddiicceess aanndd IInnddeexx 1. Equipment Details 192.168.1.1 192.168.1.33 Figure 1: Testing Environment (Use Windows 2000 Radius Server) PC1: Microsoft Windows XP Professional without Service Pack 1. Wireless Cardbus:3.0.3.0 Driver version: PC2: Microsoft Windows
  • LevelOne WGR-6012 | Manual - Page 65
    encryption key length to fit the variable test condition. 3-1-3. Setup Network adapter on PC 1.Choose the IEEE802.1X as the authentication method. (Fig 2) Note. Figure 2 is a setting picture of Windows XP without service pack 1. If users upgrade to service pack 1, then they can‟t see MD5-Challenge
  • LevelOne WGR-6012 | Manual - Page 66
    use a certificate on this computer. (Fig 3) 4. We will change EAP type to fit the variable test condition. Figure 2: Enable IEEE 802.1X access control 66
  • LevelOne WGR-6012 | Manual - Page 67
    certificate. (PC2 follows the same test procedures.) 1. Download and install the certificate on PC1. (Fig 4) 2. PC1 choose the SSID of DUT as the Access Point. 3. Set authentication type of wireless client and RADIUS server both to EAP_TLS. 4. Disable the wireless connection and enable again. 5. The
  • LevelOne WGR-6012 | Manual - Page 68
    Figure 4: Certificate information on PC1 Figure 5: Authenticating 68
  • LevelOne WGR-6012 | Manual - Page 69
    as the Access Point. 2. Set authentication type of wireless client and RADIUS server both to PEAP_TLS. 3. Disable the wireless connection and enable again. 4.The . 6. Terminate the test steps when PC2 get dynamic IP and PING remote host successfully. Support Type: The router supports the types of 802
  • LevelOne WGR-6012 | Manual - Page 70
    WPA Settings LAN IP: 192.168.1.1 Wireless Router: LAN IP: 192.168.1.1 WAN IP: 192.168.122.216 Radius Server: 192.168.122.1 UserA : XP Wireless Card:Ti-11g Tool: Odyssey Client Manager Refer to: www.funk.com HHU UHH Download: http://www.funk.com/News&Events/ody_c_wpa_preview_pn.asp HHU U
  • LevelOne WGR-6012 | Manual - Page 71
    from Radius, first. http://192.168.122.1/certsrv HHU U account : fae1 passwd : fae1 2. Then, Install this certificate and finish. 3. Go to the Web manager of Wireless Router to configure, like below: 71
  • LevelOne WGR-6012 | Manual - Page 72
    4. Go to Odyssey Client Manager, choose "Profiles" and Setup Profile name as "1" Login name and password are fae1 and fae1. Remember that you get certificate from Radius in Step1. 72
  • LevelOne WGR-6012 | Manual - Page 73
    5. Then Choose "certificate" like above. 73
  • LevelOne WGR-6012 | Manual - Page 74
    6. Then go to Authentication and first Remove EAP/ TLS and Add EAP/TLS again. 74
  • LevelOne WGR-6012 | Manual - Page 75
    7. Go "Network" and Select "1" and ok 75
  • LevelOne WGR-6012 | Manual - Page 76
    8. Back to Connection and Select "123kk. If successfully, the wireless client has to authenticate with Radius Server, like below: 9.Result: Method 2: 1. The UserA or UserB have to get certificate from Radius,first. http://192.168.122.1/certsrv HHU U account:fae1 passwd:fae1 76
  • LevelOne WGR-6012 | Manual - Page 77
    2. Then Install this certificate and finish. 3. Setting on the router and client: Router: 77
  • LevelOne WGR-6012 | Manual - Page 78
    Client: Go to "Network Connection" and select wireless adapter. Choose "View available Wireless Networks" like below: Advanced choose "123kk" Select "WirelessCA and Enable" in Trusted root certificate authority: Then, if the wireless client wants to associate, it has to request to authenticate. 78
  • LevelOne WGR-6012 | Manual - Page 79
    Troubleshooting What can I do when I have some trouble at the first time? 1. Why can I not configure the router even if the cable is plugged in the ports of Router or LAN port 4: Then, please check if the Pc gets IP address from Router. Use command mode as below: 192.168.1.115 255.255.255.0 192.168
  • LevelOne WGR-6012 | Manual - Page 80
    use Recovery mode.(Refer to Q3 and Q4) Status flashes very fast while powering on: Maybe the router is the recovery mode and please refer to Q4. 3.How to reset to factory default? A: Press Wireless on /off and WPS button simultaneously about 5 sec Status will start flashing about 5 times, remove the
  • LevelOne WGR-6012 | Manual - Page 81
    . How do I connect router by using wireless? 1.How to start to use wireless? A: First, make sure that you already installed wireless client device in your computer. Then check the Configuration of wireless router. The default is as below: About wireless client, you will see wireless icon: Then click
  • LevelOne WGR-6012 | Manual - Page 82
    can not access your wireless router, please refresh network list again. However, I still can not fine the device which SSID is "default", please refer to Q3. Choose the one that you will want to connect and Connect: If successfully, the computer will show and get IP from router: 192.168.1.115 255
  • LevelOne WGR-6012 | Manual - Page 83
    LevelOne If SSID is default and click "Properties" to check if the driver of wireless client supports AES encryption. 3. When I use wireless to connect the router, but I find the signal is very low even if I am close to the router? A: Please check if the wireless client is normal, first. If yes,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
1
LevelOne
WGR-6012
300Mbps
N_Max
Wireless Gigabit Router
User Manual
V1.0